Ultra-thin topological insulator nanostructures, in which coupling between top and bottom surface states takes place, are of great intellectual and practical importance. Due to the weak Van der Waals interaction between adjacent quintuple layers (QLs), the layered bismuth selenide (Bi2Se3), a single Dirac-cone topological insulator with a large bulk gap, can be exfoliated down to a few QLs. In this paper, we report the first controlled mechanical exfoliation of Bi2Se3 nanoribbons (> 50 QLs) by an atomic force microscope (AFM) tip down to a single QL. Microwave impedance microscopy is employed to map out the local conductivity of such ultra-thin nanoribbons, showing drastic difference in sheet resistance between 1~2 QLs and 4~5 QLs. Transport measurement carried out on an exfoliated (\leq 5 QLs) Bi2Se3 device shows non-metallic temperature dependence of resistance, in sharp contrast to the metallic behavior seen in thick (> 50 QLs) ribbons. These AFM-exfoliated thin nanoribbons afford interesting candidates for studying the transition from quantum spin Hall surface to edge states.
Liquid-phase-exfoliation is a technique capable of producing large quantities of two-dimensional material in suspension. Despite many efforts in the optimization of the exfoliation process itself not much has been done towards the integration of liquid-phase-exfoliated materials in working solid-state devices. In this article, we use dielectrophoresis to direct the assembly of liquid-phase-exfoliated TiS3 nanoribbons between two gold electrodes to produce photodetectors working in the visible. Through electrical and optical measurements we characterize the responsivity of the device and we fin…
We report scanning tunneling microscopy and spectroscopy investigation of graphene nanoribbons grown on an array of bunched steps of a 6H-SiC(0001) substrate. Our scanning tunneling microscopy images of a graphene nanoribbons on a step terrace feature a (sqrt(3)x sqrt(3))R30° pattern of aromatic rings which define our armchair nanoribbons. This is in agreement to a simulation based on density functional theory. As another signature of the one-dimensional electronic structure, in the corresponding scanning tunneling spectroscopy spectra we find well developed, sharp Van Hove singularities.
We study scanning gate microscopy (SGM) conductance mapping of a $\mathrm{MoS}_2$ zigzag ribbon exploiting tight-binding and continuum models. We show that, even though the edge modes of a pristine nanoribbon are robust to backscattering on the potential induced by the tip, the conductance mapping reveals presence of both the edge modes and the quantized spin- and valley-current carrying modes. By inspecting the electron flow from a split gate quantum point contact (QPC) we find that the mapped current flow allows to determine the nature of the quantization in the QPC as spin-orbit coupling st…
We have developed a method for depositing graphene monolayers and bilayers with minimum lateral dimensions of 2-10 nm by the mechanical exfoliation of graphite onto the Si(100)-2x1:H surface. Room temperature, ultra-high vacuum (UHV) tunnelling spectroscopy measurements of nanometer-sized single-layer graphene reveal a size dependent energy gap ranging from 0.1-1 eV. Furthermore, the number of graphene layers can be directly determined from scanning tunnelling microscopy (STM) topographic contours. This atomistic study provides an experimental basis for probing the electronic structure of nano…
We investigate the temperature distributions of Joule self-heated graphene nanoribbons (GNRs) with a spatial resolution finer than 100 nm by scanning thermal microscopy (SThM). The SThM probe is calibrated using the Raman G mode Stokes/anti-Stokes intensity ratio as a function of electric power applied to the GNR devices. From a spatial map of the temperature distribution, heat dissipation and transport pathways are investigated. By combining SThM and scanning gate microscopy data from a defected GNR, we observe hot spot formation at well-defined, localized sites.
CrGeTe3 (CGT) is a semiconducting vdW ferromagnet shown to possess magnetism down to a two-layer thick sample. Although CGT is one of the leading candidates for spintronics devices, a comprehensive analysis of CGT thickness dependent magnetization is currently lacking. In this work, we employ scanning SQUID-on-tip (SOT) microscopy to resolve the magnetic properties of exfoliated CGT flakes at 4.2 K. Combining transport measurements of CGT/NbSe2 samples with SOT images, we present the magnetic texture and hysteretic magnetism of CGT, thereby matching the global behavior of CGT to the domain str…
Graphene nanoribbons' electronic transport properties strongly depend on the type of edge, armchair, zigzag or other, and on edge functionalization that can be used for band-gap engineering. For only partly hydrogenated edges interesting magnetic properties are predicted. Electric charge accumulates at edges and corners. Scanning force microscopy has so far shown the centre of graphene nanoribbons with atomic resolution using a quartz crystal tuning fork sensor of high stiffness. Weak long-range electrostatic forces related to the charge accumulation on the edges of graphene nanoribbons could …
Unencapsulated, exfoliated black phosphorus (BP) flakes are found to chemically degrade upon exposure to ambient conditions. Atomic force microscopy, electrostatic force microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy are employed to characterize the structure and chemistry of the degradation process, suggesting that O2 saturated H2O irreversibly reacts with BP to form oxidized phosphorus species. This interpretation is further supported by the observation that BP degradation occurs more rapidly on hydrophobic octadecy…
Recent theoretical calculations and photoemission spectroscopy measurements on the bulk Bi2Se3 material show that it is a three-dimensional topological insulator possessing conductive surface states with nondegenerate spins, attractive for dissipationless electronics and spintronics applications. Nanoscale topological insulator materials have a large surface-to-volume ratio that can manifest the conductive surface states and are promising candidates for devices. Here we report the synthesis and characterization of high quality single crystalline Bi2Se3 nanomaterials with a variety of morpholog…
We have performed scanning tunneling microscopy/spectroscopy (STM/STS) study and first-principles calculations to investigate the atomic structure and electronic properties of silicon nanoribbons (SiNRs) grown on Ag(110). Despite of the extensive research on SiNRs in the last decades, its atomic structure is still not fully understood so far. In this report we determine that the structure of SiNRs/Ag(110) is armchair silicene nanoribbon with reconstructed edges. Meanwhile, pronounced quantum well states (QWS) in SiNRs were observed and their energy spectrum was systematically measured. The QWS…
We address the atomistic nature of the longitudinal static friction against sliding of graphene nanoribbons (GNRs) deposited on gold, a system whose structural and mechanical properties have been recently the subject of intense experimental investigation. By means of numerical simulations and modeling we show that the GNR interior is structurally lubric ("superlubric") so that the static friction is dominated by the front/tail regions of the GNR, where the residual uncompensated lateral forces arising from the interaction with the underneath gold surface opposes the free sliding. As a result o…
We report the growth of single-crystalline Bi2Se3 nanoribbons with lengths up to several millimeters via a catalyst-free physical vapor deposition method. Scanning transmission electron microscopy analysis reveals that the nanoribbons grow along the (1120) direction. We obtain a detailed characterization of the electronic structure of the Bi2Se3 nanoribbons from measurements of Shubnikov-de Haas (SdH) quantum oscillations. Angular dependent magneto-transport measurements reveal a dominant two-dimensional contribution originating from surface states and weak contribution from the bulk states. T…
We study mechanically exfoliated nanosheets of franckeite by quantitative optical microscopy. The analysis of transmission mode and epi-illumination mode optical microscopy images provides a rapid method to estimate the thickness of the exfoliated flakes at first glance. A quantitative analysis of the optical contrast spectra by means of micro-reflectance allows one to determine the refractive index of franckeite in a broad range of the visible spectrum through a fit of the acquired spectra to a Fresnel law based model.
Many atomically thin exfoliated 2D materials degrade when exposed to ambient conditions. They can be protected and investigated by means of transport and optical measurements if they are encapsulated between chemically inert single layers in the controlled atmosphere of a glove box. Here, we demonstrate that the same encapsulation procedure is also compatible with scanning tunneling microscopy (STM) and spectroscopy (STS). To this end, we report a systematic STM/STS investigation of a model system consisting of an exfoliated 2H-NbSe2 crystal capped with a protective 2H-MoS2 monolayer. We obser…
Precise control over the size and shape of graphene nanostructures allows engineering spin-polarized edge and topological states, representing a novel source of non-conventional $π$-magnetism with promising applications in quantum spintronics. A prerequisite for their emergence is the existence of robust gapped phases, which are difficult to find in extended graphene systems: only armchair graphene nanoribbons (GNRs) show a band gap that, however, closes for any other GNR orientation. Here we show that semi-metallic chiral GNRs (chGNRs) narrowed down to nanometer widths undergoes a topological…
Probing topological Floquet states in graphene with ultrafast terahertz scanning tunneling microscopy
University of Bremen（不来梅大学）；Max Planck Institute for the Structure and Dynamics of Matter（马普物质结构与动力学研究所）；Paul Scherrer Institute（保罗谢尔研究所）；University of Fribourg（弗里堡大学）；The Flatiron Institute（_flatiron研究所）；Fritz Haber Institute of the Max Planck Society（马克斯·普朗克学会弗里茨·哈伯研究所）
We investigated the atomic structures, Raman spectroscopic and electrical transport properties of individual graphene nanoribbons (GNRs, widths ~10-30 nm) derived from sonochemical unzipping of multi-walled carbon nanotubes (MWNTs). Aberration-corrected transmission electron microscopy (TEM) revealed a high percentage of two-layer (2L) GNRs and some single layer ribbons. The layer-layer stacking angles ranged from 0o to 30o including average chiral angles near 30o (armchair orientation) or 0o (zigzag orientation). A large fraction of GNRs with bent and smooth edges was observed, while the rest…
Imposing additional confinement in two-dimensional (2D) materials can yield further control over the associated electronic, optical, and topological properties. However, synthesis of ultra-narrow nanoribbons (NRs) remains a challenge, particularly for the transition metal dichalcogenides (TMDs), and synthesizing TMD NRs narrower than 50 nm has remained elusive. Here, we report the vapor-phase synthesis of ultra-narrow TaS2 NRs. The NRs are grown within the hollow cavity of carbon nanotubes, thereby limiting their lateral dimensions and layer number, while simultaneously stabilizing them agains…
Magnetic force microscopy (MFM) signals have recently been detected from whole pieces of mechanically exfoliated graphene and molybdenum disulfide (MoS2) nanosheets and magnetism of the two nanomaterials was claimed based on these observations. However, non-magnetic interactions or artefacts are commonly associated with MFM signals, which makes the interpretation of MFM signals not straightforward. A systematic investigation has been done to examine possible sources of the MFM signals from graphene and MoS2 nanosheets and whether the MFM signals can be correlated with magnetism. It is found th…
Isolation and characterization of mechanically exfoliated black phosphorus flakes with a thickness down to two single-layers is presented. A modification of the mechanical exfoliation method, which provides higher yield of atomically thin flakes than conventional mechanical exfoliation, has been developed. We present general guidelines to determine the number of layers using optical microscopy, Raman spectroscopy and transmission electron microscopy in a fast and reliable way. Moreover, we demonstrate that the exfoliated flakes are highly crystalline and that they are stable even in free-stand…
Confocal laser scanning microscopy (CLSM) is a non-destructive, highly-efficient optical characterization method for large-area analysis of graphene on different substrates, which can be applied in ambient air, does not require additional sample preparation, and is insusceptible to surface charging and surface contamination. CLSM leverages optical properties of graphene and provides greatly enhanced optical contrast and mapping of thickness down to a single layer. We demonstrate the effectiveness of CLSM by measuring mechanically exfoliated and chemical vapor deposition graphene on Si/SiO2, an…
The peeling of an immobile adsorbed membrane is a well known problem in engineering and macroscopic tribology. In the classic setup, picking up at one extreme and pulling off results in a peeling force that is a decreasing function of the pickup angle. As one end is lifted, the detachment front retracts to meet the immobile tail. At the nanoscale, interesting situations arise with the peeling of graphene nanoribbons (GNRs) on gold, as realized, e.g., by atomic force microscopy. The nanosized system shows a constant-force steady peeling regime, where the tip lifting h produces no retraction of …
Topological insulators (TIs) are an emerging class of materials that host highly robust in-gap surface/interface states while maintaining an insulating bulk. While most notable scientific advancements in this field have been focused on TIs and related topological crystalline insulators in 2D and 3D, more recent theoretical work has predicted the existence of 1D symmetry-protected topological phases in graphene nanoribbons (GNRs). The topological phase of these laterally-confined, semiconducting strips of graphene is determined by their width, edge shape, and the terminating unit cell, and is c…
Atomic-scale imaging of graphene nanoribbons on graphene after polymer-free substrate transfer
Universidad de Granada（格拉纳达大学）；The Pennsylvania State University（宾夕法尼亚州立大学）；Max Planck Institute for Polymer Research（马克斯·普朗克聚合物研究所）；University of Bern（伯尔尼大学）；Johannes Gutenberg University Mainz（美因茨约翰内斯·古腾堡大学）
Thin adhesive films can be removed from substrates, torn, and folded in distinct geometries under external driving forces. In two-dimensional materials, however, these processes can be self-driven as shown in previous studies on folded twisted bilayer graphene nanoribbons produced by spontaneous tearing and peeling from a substrate. Here, we use atomic force microscopy techniques to generate and characterize the geometrical structure of naturally self-grown folded nanoribbon structures. Measurements of nanoribbon width and interlayer separation reveal similar twist-angle dependences possibly c…
