Compact and explicit physical model for lateral metal-oxide-semiconductor field-effect transistor with nanoelectromechanical system based resonant gate
Laurent Duraffourg, Eric Colinet, Sebastien Hentz, Eric Ollier, Philippe Andreucci, Bruno Reig, Philippe Robert
We propose a simple analytical model of a metal-oxide-semiconductor field-effect transistor with a lateral resonant gate based on the coupled electromechanical equations, which are self-consistently solved in time. All charge densities according to the mechanical oscillations are evaluated. The only input parameters are the physical characteristics of the device. No extra mathematical parameters are used to fit the experimental results. Theoretical results are in good agreement with the experimental data in static and dynamic operation. Our model is comprehensive and may be suitable for any electromechanical device based on the field-effect transduction.
We have fabricated carbon nanotube (CN) field-effect transistors with multiple, individually addressable gate segments. The devices exhibit markedly different transistor characteristics when switched using gate segments controlling the device interior versus those near the source and drain. We ascribe this difference to a change from Schottky barrier modulation at the contacts to bulk switching. We also find that the current through the bulk portion is independent of gate length for any gate voltage, offering direct evidence for ballistic transport in semiconducting CNs over at least a few hun…
In this paper we propose two transistor concepts based on lateral heterostructures of monolayer MoS$_2$, composed of adjacent regions of 1T (metallic) and 2H (semiconducting) phases, inspired by recent research showing the possibility to obtain such heterostructures by electron beam irradiation. The first concept, the lateral heterostructure field-effect transistor, exhibits potential of better performance with respect to the foreseen evolution of CMOS technology, both for high performance and low power applications. Performance potential has been evaluated by means of detailed multi-scale mat…
Investigating lateral electrical transport in p-type thin film chalcogenides is important to evaluate their potential for field-effect transistors (FETs) and phase-change memory applications. For instance, p-type FETs with sputtered materials at low temperature (<= 250 C) could play a role in flexible electronics or back-end-of-line (BEOL) silicon-compatible processes. Here, we explore lateral transport in chalcogenide films (Sb2Te3, Ge2Sb2Te5, Ge4Sb6Te7) and multilayers, with Hall measurements (in <= 50 nm thin films) and with p-type transistors (in <= 5 nm ultrathin films). The highest Hall …
Two-dimensional materials are considered for future quantum devices and are usually produced by extensive methods like molecular beam epitaxy. We report on the fabrication of field-effect transistors using individual ultra-thin lead sulfide nanostructures with lateral dimensions in the micrometer range and a height of a few nanometers as conductive channel produced by a comparatively fast, inexpensive, and scalable colloidal chemistry approach. Contacted with gold electrodes, such devices exhibit p-type behavior and temperature-dependent photoconductivity. Trap states play a crucial role in th…
Two-dimensional, solution-processable semiconductor materials are anticipated to be used in low-cost electronic applications, such as transistors and solar cells. Here, lead sulfide nanosheets with a lateral size of several microns are synthesized and it is shown how their height can be tuned by the variation of the ligand concentrations. As a consequence of the adjustability of the nanosheets' height between 2 to more than 20 nm charge carriers are in confinement, which has a decisive impact on their electronic properties. This is demonstrated by their use as conduction channel in a field-eff…
We propose a spin transistor using only non-magnetic materials that exploits the characteristics of bulk inversion asymmetry (BIA) in (110) symmetric quantum wells. We show that extremely large spin splittings due to BIA are possible in (110) InAs/GaSb/AlSb heterostructures, which together with the enhanced spin decay times in (110) quantum wells demonstrates the potential for exploitation of BIA effects in semiconductor spintronics devices. Spin injection and detection is achieved using spin-dependent resonant interband tunneling and spin transistor action is realized through control of the e…
Heterojunctions between three-dimensional (3D) semiconductors with different bandgaps are the basis of modern light-emitting diodes, diode lasers, and high-speed transistors. Creating analogous heterojunctions between different two-dimensional (2D) semiconductors would enable band engineering within the 2D plane and open up new realms in materials science, device physics and engineering. Here we demonstrate that seamless high-quality in-plane heterojunctions can be grown between the 2D monolayer semiconductors MoSe2 and WSe2. The junctions, grown by lateral hetero-epitaxy using physical vapor …
A large spin-dependent and electric field-tunable magnetoresistance of a two-dimensional electron system (2DES) is a key ingredient for the realization of many novel concepts for spin-based electronic devices. The low magnetoresistance observed during the last decades in devices with lateral semiconducting (SC) transport channels between ferromagnetic (FM) source (S) and drain (D) contacts has been the main obstacle for realizing spin field effect transistor proposals. Here, we show both, a large two terminal magnetoresistance in lateral 2DES-based spin valve geometry, with up to 80% resistanc…
Self-heating is a severe problem for high-power GaN electronic and optoelectronic devices. Various thermal management solutions, e.g. flip-chip bonding or composite substrates have been attempted. However, temperature rise still limits applications of the nitride-based technology. Here we demonstrate that thermal management of GaN transistors can be substantially improved via introduction of the alternative heat-escaping channels implemented with few-layer graphene - an excellent heat conductor. We have transferred few-layer graphene to AlGaN/GaN heterostructure field-effect transistors on SiC…
Inspired by the dendritic integration and spiking operation of a biological neuron, flexible oxide-based neuron transistors gated by solid-state electrolyte films are fabricated on flexible plastic substrates for biochemical sensing applications. When a quasi-static dual-gate laterally synergic sensing mode is adopted, the neuron transistor sensor shows a high pH sensitivity of ~105 mV/pH, which is higher than the Nernst limit. Our results demonstrate that single-spike dynamic mode can remarkably improve the pH sensitivity, reduce response/recover time and power consumption. We also find that …
Next-generation electronics calls for new materials beyond silicon for increased functionality, performance, and scaling in integrated circuits. Carbon nanotubes and semiconductor nanowires are at the forefront of these materials, but have challenges due to the complex fabrication techniques required for large-scale applications. Two-dimensional (2D) gapless graphene and semiconducting transition metal dichalcogenides (TMDCs) have emerged as promising electronic materials due to their atomic thickness, chemical stability and scalability. Difficulties in the assembly of 2D electronic structures…
The intrinsic spin-dependent transport properties of two types of lateral VS2|MoS2 heterojunctions are systematically investigated using first-principles calculations, and their various nanodevices with novel properties are designed. The lateral VS2|MoS2 heterojunction diodes show a perfect rectifying effect and are promising for the applications of Schottky diodes. A large spin-polarization ratio is observed for the A-type device and pure spin-mediated current is then realized. The gate voltage significantly tunes the current and rectification ratio of their field-effect transistors (FETs). I…
Single electron transistors (SETs) made from single wall carbon nanotubes (SWCNTs) are promising for quantum electronic devices operating with ultra-low power consumption and allow fundamental studies of electron transport. We report on SETs made by registered in-plane growth utilizing tailored nanoscale catalyst patterns and chemical vapor deposition. Metallic SWCNTs have been removed by an electrical burn-in technique and the common gate hysteresis was removed using PMMA and baking, leading to field effect transistors with large on/off ratios up to 10^5. Further segmentation into 200 nm shor…
We have studied the finite bias transport properties of a 2H-1T' MoS$_2$ lateral metal-semiconductor (M-S) junction by non-equilibrium Green's functions calculations, aimed at contacting the 2D channel in a field effect transistor. Our results indicate that (a) despite the fundamentally different electrostatics of line and planar dipoles, the Schottky barrier heights respond similarly to changes in doping and applied bias in 2D and 3D M-S junctions, (b) 2H-1T' MoS$_2$ lateral junctions are free from Fermi level pinning, (c) armchair interfaces have superior contacting properties vs.\ zigzag in…
Black phosphorus (BP) has recently emerged as a promising narrow band gap layered semiconductor with optoelectronic properties that bridge the gap between semi-metallic graphene and wide band gap transition metal dichalcogenides such as MoS2. To date, BP field-effect transistors have utilized a lateral geometry with in-plane transport dominating device characteristics. In contrast, we present here a vertical field-effect transistor geometry based on a graphene/BP van der Waals heterostructure. The resulting device characteristics include high on-state current densities (> 1600 A/cm2) and curre…
High-Mobility Indium Native Oxide Transistors via Liquid-Metal Printing in Air
The Australian National University（澳大利亚国立大学）；University of New South Wales (UNSW Sydney)（新南威尔士大学）；Australian National Fabrication Facility, Research School of Physics, The Australian National University（澳大利亚国立大学物理研究学院澳大利亚国家制造设施）
We report ambipolar transport properties in black phosphorus using an electric-double-layer transistor (EDLT) configuration. The transfer curve clearly exhibits ambipolar transistor behavior with an ON-OFF ratio of 5*10^3. The band gap was determined as = 0.35 eV from the transfer curve, and Hall-effect measurements revealed that the hole mobility was ~ 190 cm^2/Vs at 170 K, which is one order of magnitude larger than the electron mobility. By inducing an ultra-high carrier density of ~ 10^14 cm^-2, an electric-field-induced transition from the insulating state to the metallic state was realiz…
Two-dimensional monolayer transition metal dichalcogenides (TMDs) have unique optical and electronic properties for applications pertaining to field effect transistors, light emitting diodes, photodetectors, and solar cells. Vertical interfacing of WS2 and MoS2 layered materials in combination with other families of 2D materials were previously reported. On the other hand, lateral heterostructures are particularly promising for the spatial confinement of charged carriers, excitons and phonons within an atomically-thin layer. In the lateral geometry, the quality of the interface in terms of the…
The reliable production of two-dimensional crystals is essential for the development of new technologies based on 2D materials. However, current synthesis methods suffer from a variety of drawbacks, including limitations in crystal size and stability. Here, we report the fabrication of large-area, high-quality 2D tellurium (tellurene) using a substrate-free solution process. Our approach can create crystals with a process-tunable thickness, from monolayer to tens of nanometres, and with lateral sizes of up to 100 um. The chiral-chain van der Waals structure of tellurene gives rise to strong in…
The performance of ultra-wide band gap materials like $β$-Ga$_\mathrm{2}$O$_\mathrm{3}$ is critically dependent on achieving high average electric fields within the active region of the device. In this report, we show that high-k gate dielectrics like BaTiO$_\mathrm{3}$ can provide an efficient field management strategy by improving the uniformity of electric field profile in the gate-drain region of lateral field effect transistors. Using this strategy, we were able to achieve high average breakdown fields of 1.5 MV/cm and 4 MV/cm at gate-drain spacing (L$_\mathrm{gd}$) of 6 um and 0.6 um res…
We measure top-gated graphene field effect transistors (GFETs) with nanosecond-range pulsed gate and drain voltages. Due to high-k dielectric or graphene imperfections, the drain current decreases ~10% over time scales of ~10 us, consistent with charge trapping mechanisms. Pulsed operation leads to hysteresis-free I-V characteristics, which are studied with pulses as short as 75 ns and 150 ns at the drain and gate, respectively. The pulsed operation enables reliable extraction of GFET intrinsic transconductance and mobility values independent of sweep direction, which are up to a factor of two…
In this paper, we have experimentally demonstrated, for the first time, III-V 4D transistors with vertically stacked InGaAs nanowire (NW) channels and gate-all-around (GAA) architecture. Novel process technology enabling the transition from 3D to 4D structure has been developed and summarized. The successful fabrication of InGaAs lateral and vertical NW arrays has led to 4x increase in MOSFET drive current. The top-down technology developed in this paper has opened a viable pathway towards future low-power logic and RF transistors with high-density III-V NWs.
Computational design of NDR tunnel diodes with high peak-to-valley current ratio based on two-dimensional cold metals: The case of NbSi$_2$N$_4$/HfSi$_2$N$_4$/NbSi$_2$N$_4$ lateral heterojunction diode
High throughput experimental methods are known to accelerate the rate of research, development, and deployment of electronic materials. For example, thin films with lateral gradients in composition, thickness, or other parameters have been used alongside spatially-resolved characterization to assess how various physical factors affect material properties under varying measurement conditions. Similarly, multi-layer electronic devices that contain such graded thin films as one or more of their layers can also be characterized spatially in order to optimize the performance. In this work, we apply…
A large spin-accumulation voltage of more than 1.5 mV at 1 mA, i.e., a magnetoresistance of 1.5 Ω, was measured by means of the local three-terminal magnetoresistance in nondegenerate Si-based lateral spin valves (LSVs) at room temperature. This is the largest spin-accumulation voltage measured in semiconductor-based LSVs. The modified spin drift-diffusion model, which successfully accounts for the spin drift effect, explains the large spin-accumulation voltage and significant bias-current-polarity dependence. The model also shows that the spin drift effect enhances the spin-dependent magnetor…
We have fabricated ambipolar transistors on chemically prepared hydrogen-terminated Si(111) surfaces, in which a two-dimensional electron system (2DES) or a two-dimensional hole system (2DHS) can be populated in the same conduction channel by changing the gate voltage of a global gate applied through a vacuum gap. Depending on the gate bias, ion implanted n$^+$ and p$^+$ regions function either as Ohmic contacts or as in-plane gates, which laterally confine the carriers induced by the global gate. On one device, electron and hole densities of up to $7.8\times10^{11}$ cm$^{-2}$ and $7.6\times10…
Reliable and precise measurements of the relative energy of band edges in semiconductors are needed to determine band gaps and band offsets, as well as to establish the band diagram of devices and heterostructures. These measurements are particularly important in the field of two-dimensional materials, in which many new semiconducting systems are becoming available through exfoliation of bulk crystals. For two-dimensional semiconductors, however, commonly employed techniques suffer from difficulties rooted either in the physics of these systems, or of technical nature. The very large exciton b…
Recently, a new type of two-dimensional layered material, i.e. C3N, has been fabricated by polymerization of 2,3-diaminophenazine and used to fabricate a field-effect transistor device with an on/off current ratio reaching 5.5E10 (Adv. Mater. 2017, 1605625). Here we have performed a comprehensive first-principles study mechanical and electronic properties of C3N and related derivatives. Ab inito molecular dynamics simulation shows that C3N monolayer can withstand high temperature up to 2000K. Besides high stability, C3N is predicted to be a superior stiff material with high Young's modulus (10…
The negative differential resistance (NDR) tunnel diodes are promising alternative devices for beyond-CMOS computing as they offer several potential applications when integrated with transistors. We propose a novel semiconductor-free NDR tunnel diode concept that exhibits an ultra-high peak-to-valley current ratio (PVCR) value. Our proposed NDR diode consists of two cold metal electrodes separated by a thin insulating tunnel barrier. The NDR effect stems from the unique electronic band structure of the cold metal electrodes, i.e., the width of the isolated metallic bands around the Fermi level…
In this paper, a two-dimensional analytical model of a laterally graded-channel triple-metal double-gate Junctionless Field Effect Transistor with hetero dielectric gate oxide stack consisting of SiO$_2$ and HfO$_2$ is derived. The model illustrates higher drive current and better performance against hazardous SCEs and HCEs in below 30 nm regime. Parabolic approximation method is used here to construct channel potentials and electric fields by solving 2-D Poisson's equation with applicable boundary conditions. The basic central and surface potentials as well as central and surface electric fie…
In this letter, fin-shape tri-gate $β$-Ga$_{2}$O$_{3}$ lateral MESFETs are demonstrated with a high power figure of merit of 0.95 GW/cm$^{2}$ - a record high for any $β$-Ga$_{2}$O$_{3}$ transistor to date. A low-temperature undoped buffer-channel stack design is developed which demonstrates record high Hall and drift electron mobilities in doped $β$-Ga$_{2}$O$_{3}$ channels allowing for low ON resistances R$_{ON}$ in $β$-Ga$_{2}$O$_{3}$ MESFETs. Fin-widths (W$_{fin}$) were 1.2-1.5 $μ$m and there were 25 fins (N$_{fin}$) per device with a trench depth of $\sim$1$μ$m. A $β$-Ga$_2$O$_3$ MESFET wi…
Two-dimensional (2D) indium monoselenide (InSe) has attracted significant attention as a III-VI two-dimensional semiconductor (2D) with a combination of favorable attributes from III-V semiconductors as well as van der Waals 2D transition metal dichalcogenides. Nevertheless, the large-area synthesis of phase-pure 2D InSe remains unattained due to the complexity of the binary In-Se system and the difficulties in promoting lateral growth. Here, we report the first polymorph-selective synthesis of epitaxial 2D InSe by metal-organic chemical deposition (MOCVD) over 2 inch diameter sapphire wafers.…
A non-vanishing electric field inside a non-centrosymmetric bulk crystal transforms into a momentum- dependent magnetic field, namely, a spin-orbit field (SOF). SOFs are of great use in spintronics because they enable spin manipulation via the electric field. At the same time, however, spintronic applications are severely limited by the SOF, as electrons traversing the SOF easily lose their spin information. Here, we propose that in-plane ferroelectricity in (001)-oriented SnTe thin films harness the Janus-faced SOF in a reconcilable way to enable electrical spin controllability and suppress s…
Oxide heterostructures represent a unique playground for triggering the emergence of novel electronic states and for implementing new device concepts. The discovery of 2D conductivity at the $LaAlO_3/SrTiO_3$ interface has been linking for over a decade two of the major current research fields in Materials Science: correlated transition-metal-oxide systems and low-dimensional systems. A full merging of these two fields requires nevertheless the realization of $LaAlO_3/SrTiO_3$ heterostructures in the form of freestanding membranes. Here we show a completely new method for obtaining oxide heter…
