A general problem arising in computer simulations is the number of material and device parameters, which have to be determined by dedicated experiments and simulation-based parameter extraction. In this study we analyze measurements of the short-circuit current dependence on the active layer thickness and current-voltage curves in poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM) based solar cells. We have identified a set of parameter values including dissociation parameters that describe the experimental data. The overall agreement of our model with experiment is good, however a discrepancy in the thickness dependence of the current-voltage curve questions the influence of the electric field in the dissociation process. In addition transient simulations are analyzed which show that a measurement of the turn-off photocurrent can be useful for estimating charge carrier mobilities.
Hybrid Interface States and Spin Polarization at Ferromagnetic Metal-Organic Heterojunctions: Interface Engineering for Efficient Spin Injection in Organic Spintronics
For many years the faith of organic photovoltaics has been linked to the one of fullerene, since fullerene has been considered the electron-acceptor of choice in bulk heterojunctions solar cells. In the last years, the number of molecules that can be very competitive in replacing fullerene has increased significantly. In this work, we study by means of different theoretical methods five molecules that have demonstrated to work effectively as acceptors in organic heterojunctions. We discuss the comparison of simulated absorption spectra with the experimental spectra.
Organic heterojunction solar cells are analyzed within a minimal model that includes the essential physical features of such systems. The dynamical properties of this model, calculated using a master equation approach, account for the qualitative behavior of such systems. The model yields explicit results for current-voltage behavior as well as performance characteristics expressed in terms of the thermodynamic efficiency as well as the power conversion efficiency at maximum power, making it possible to evaluate the optimal setup for this device model.
Energetic disorder induced leakage current in organic bulk heterojunction solar cells: comprehending the ultra-high open circuit voltage loss at low temperatures
Absence of Structural Impact of Noble Nanoparticles on P3HT: PCBM Blends for Plasmon Enhanced Bulk-Heterojunction Organic Solar Cells Probed by Synchrotron Grazing Incidence X-Ray Diffraction
Achieving balanced open circuit voltage and short circuit current by tuning the interfacial energetics in organic bulk heterojunction solar cells: A drift-diffusion simulation
Organic solar cells (OSCs) containing an active layer consisting of a nanostructured blend of a conjugated polymer like poly(3-hexylthiophene) (P3HT) and an electron acceptor molecule have the potential of competing against silicon-based photovoltaic panels. However, this potential is unfulfilled primarily due to interrelated production and stability issues. The generally employed spin coating process for fabricating organic solar cells cannot be scaled up. Recently, He et al., have reported that the gelation of P3HT with [6,6]-phenyl-C61-butyric acid methyl ester (PC60BM) under sub-ambient co…
The performance of organic solar cells strongly depends on the bulk heterojunction (BHJ) morphology of the photoactive layer. This BHJ forms during the drying of the wet-deposited solution, because of physical processes such as crystallization and/or liquid liquid phase separation (LLPS). However, the process-structure relationship remains insufficiently understood. In this work, a recently developed, coupled phase field fluid mechanics framework is used to simulate the BHJ formation upon drying. For the first time, this allows to investigate the interplay between all the relevant physical pro…
We investigate nongeminate recombination in organic solar cells based on copper phthalocyanine (CuPc) and C$_{60}$. Two device architectures, the planar heterojunction (PHJ) and the bulk heterojunction (BHJ), are directly compared in view of differences in charge carrier decay dynamics. We apply a combination of transient photovoltage (TPV) experiments, yielding the small perturbation charge carrier lifetime, and charge extraction measurements, providing the charge carrier density. In organic solar cells, charge photogeneration and recombination primarily occur at the donor--acceptor heteroint…
A ferroelectric junction transistor memory made from switchable van der Waals p-n heterojunctions
Zhejiang University（浙江大学）；King Abdullah University of Science and Technology（阿卜杜拉国王科技大学）；Wenzhou University（温州大学）；Chinese Academy of Sciences（中国科学院）；South China Normal University（华南师范大学）；Xidian University（西安电子科技大学）
Electrospun Conjugated Polymer/Fullerene Hybrid Fibers: Photoactive Blends, Conductivity through Tunnelling-AFM, Light-Scattering, and Perspective for Their Use in Bulk-Heterojunction Organic Solar Cells
Band offsets and electronic structure at $α$/$β$-Ga$_2$O$_3$ and $κ$/$β$-Ga$_2$O$_3$ phase heterojunctions
MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, School of Physics, Xi’an Jiaotong University（西安交通大学物理学院凝聚态物质非平衡合成与调制教育部重点实验室）
Organic-inorganic halide perovskites have been intensively re-investigated due to their applications, yet the opto-electronic function of the organic cation remains unclear. Through organic-selective resonant Auger electron spectroscopy measurements on well-defined single crystal surfaces, we find evidence for electronic coupling in the unoccupied states between the organic and inorganic sub-lattices of the prototypical hybrid perovskite, which is contrary to the notion based on previous studies that the organic cation is electronically inert. The coupling is relevant for electron dynamics in …
We investigate the mechanical properties of $π$-conjugated polymeric materials composed of regioregular poly(3-hexylthiophene) (P3HT) and fullerene C$_{60}$ using coarse-grained molecular dynamics simulations. Specifically, we perform tensile simulations of P3HT:C$_{60}$ composites with varied degrees of polymerization and C$_{60}$ mass fractions to obtain their stress-strain responses. Decomposition of stress tensor into kinetic energy and virial contributions indicates that the tensile moduli of the pure P3HT samples are greatly dependent on non-bonded interactions and on bonded interactions…
Halide perovskites have recently gained widespread attention for their exceptional optoelectronic properties which have been illuminated by extensive spectroscopic investigations. In this article, nanophotonic surface-engineering using soft-lithography has been used to reproduce nanostructures with enhanced functionalities. A non-invasive optical technique based on Raman and photolumines-cence (PL) spectroscopy is employed to investigate the interactive effect of the thermal and optical behaviour in surface-patterned hybrid organic-inorganic halide perovskite thin films. The thermophys-ical pr…
The structural similarity between hexagonal boron nitride (h-BN) and graphene nanoribbons allows for the formation of heterojunctions with small chain stress. The combination of the insulation nature of the former and the quasi-metallic property of the latter makes this kind of heterostructure particularly interesting for flat optoelectronics. Recently, it was experimentally demonstrated that the shapes of the graphene and h-BN domains can be controlled precisely, and sharp graphene/h-BN interfaces can be created. Here, we investigated the electronic and structural properties of graphene (h-BN…
