The measurement of the lateral Casimir force between two aligned sinusoidally corrugated Au-coated surfaces has been performed in the nonadditive regime. The use of deeper corrugations also allowed to demonstrate an asymmetry in the phase dependences of the lateral Casimir force, as predicted earlier. The measurement data are found to be in excellent agreement with the exact theoretical results computed at T=300 K including effect of real material properties. The deviations between the exact theory and the proximity force approximation are quantified. The obtained results are topical for applications in nanomachines.
In the current work we present the complete results for the measurement of normal Casimir force between shallow and smooth sinusoidally corrugated gold coated sphere and a plate at various angles between the corrugations using an atomic force microscope. All measured data were compared with the theoretical approach using the proximity force approximation and theory based on derivative expansion. In both cases real material properties of the surfaces and non-zero temperature were taken into account. Special attention is paid to the description of electrostatic interactions between corrugated su…
We study the lateral dependence of the Casimir energy for different corrugated gratings of arbitrary periodic profile. To this end we model the profiles as stacks of horizontal rectangular slices following the profiles' shape and evaluate numerically the Casimir energy between them for different relative lateral displacements of the two corrugated plates. We compare our results with predictions obtained within the proximity force approximation (PFA). At comparable separation of the corrugated plates and geometric parameters, we find a strong dependence of the Casimir energy on the shape of the…
We propose a method to probe dispersive atom-surface interactions by measuring via two-photon Bragg spectroscopy the dynamic structure factor of a Bose-Einstein condensate above corrugated surfaces. This method takes advantage of the condensate coherence to reveal the spatial Fourier components of the lateral Casimir-Polder interaction energy.
Various applications of the multiple scattering technique to calculating Casimir energy are described. These include the interaction between dilute bodies of various sizes and shapes, temperature dependence, interactions with multilayered and corrugated bodies, and new examples of exactly solvable separable bodies.
We consider two parallel corrugated plates and show that a Casimir torque arises when the corrugation directions are not aligned. We follow the scattering approach and calculate the Casimir energy up to second order in the corrugation amplitudes, taking into account nonspecular reflections, polarization mixing and the finite conductivity of the metals. We compare our results with the proximity force approximation, which overestimates the torque by a factor 2 when taking the conditions that optimize the effect. We argue that the Casimir torque could be measured for separation distances as large…
We study the lateral Casimir force between corrugated dielectric plates. We use the dielectric contrast perturbation theory [R. Golestanian, {\it Phys. Rev. Lett.} {\bf 95}, 230601, (2005)], which allows us to consider arbitrary deformations with large amplitudes. We consider sinusoidal, rectangular, and sawtooth corrugations, for samples made of silicon and gold. We use the plasma and Drude-Lorentz models for the permittivity of gold and silicon, respectively. For these geometries and materials, the lateral Casimir force is {\it not} a sinusoidal function of the relative lateral displacement …
In this paper aiming to obtain the Casimir energy between a sinusoidally corrugated sphere and a plate, we first present a derivation of the sphere-plate Casimir force obtained by applying proximity force approximation (PFA). One may investigate this problem by using the scattering matrix method. Despite that this method achieves the exact result, but difficulties of applying this formalism make the procedure complicated. We use the PFA to achieve the purpose in a truly explicit manner. Considering the sphere to have different kinds of sinusoidally corrugations, we obtain the effect of deforma…
The general perturbative expression for the lateral Casimir force between two plates covered by longitudinal corrugations of arbitrary shape is obtained. This expression is applicable for corrugation periods larger than the separation distance. The cases of asymmetric corrugations are considered, which allow to increase the maximum to minimum force ratio and affect the character of equilibrium points. This opens new opportunities to control the lateral Casimir forces for use in microelectromechanical devices based entirely on the vacuum fluctuation properties.
The lateral Casimir force, which arises between aligned sinusoidally corrugated surfaces of a sphere and a plate, was measured for the case of a small corrugation period beyond the applicability region of the proximity force approximation. The increased amplitudes of the corrugations on both the sphere and the plate allowed observation of an asymmetry of the lateral Casimir force, i.e., deviation of its profile from a perfect sine function. The dependences of the lateral force on the phase shift between the corrugations on both test bodies were measured at different separations in two sets of …
We derive the lateral Casimir-Polder force on a ground state atom on top of a corrugated surface, up to first order in the corrugation amplitude. Our calculation is based on the scattering approach, which takes into account nonspecular reflections and polarization mixing for electromagnetic quantum fluctuations impinging on real materials. We compare our first order exact result with two commonly used approximation methods. We show that the proximity force approximation (large corrugation wavelengths) overestimates the lateral force, while the pairwise summation approach underestimates it due …
We obtain stronger laboratory constraints on the coupling constants of axion-like particles to nucleons from measurements of the normal and lateral Casimir forces between sinusoidally corrugated surfaces of a sphere and a plate. For this purpose, the normal and lateral additional force arising in the experimental configurations due to two-axion exchange between protons and neutrons are calculated. Our constraints following from measurements of the normal and lateral Casimir forces are stronger than the laboratory constraints reported so far for masses of axion-like particles larger than 11eV a…
The lateral Casimir force acting between a sinusoidally corrugated gold plate and sphere was calculated and measured. The experimental setup was based on the atomic force microscope specially adapted for the measurement of the lateral Casimir force. The measured force oscillates sinusoidally as a function of the phase difference between the two corrugations. Both systematic and random errors are analysed and a lateral force amplitude of $3.2\times 10^{-13} $N was measured at a separation distance of 221 nm with a resulting relative error 24% at a 95% confidence probability. The dependence of t…
We find the lateral projection of the Casimir force for a configuration of a sphere above a corrugated plate. This force tends to change the sphere position in the direction of a nearest corrugation maximum. The probability distribution describing different positions of a sphere above a corrugated plate is suggested which is fitted well with experimental data demonstrating the nontrivial boundary dependence of the Casimir force.
We study the torque arising between two corrugated metallic plates due to the interaction with electromagnetic vacuum. This Casimir torque can be measured with torsion pendulum techniques for separation distances as large as 1$μ$m. It allows one to probe the nontrivial geometry dependence of the Casimir energy in a configuration which can be evaluated theoretically with accuracy. In the optimal experimental configuration, the commonly used proximity force approximation turns out to overestimate the torque by a factor 2 or larger.
We obtain constraints on parameters of the Yukawa-type corrections to Newton's gravitational law from measurements of the gradient of the Casimir force between surfaces coated with ferromagnetic metal Ni and from measurements of the Casimir force between Au-coated sinusoidally corrugated surfaces at various angles between corrugations. It is shown that constraints following from the experiment with magnetic surfaces are slightly weaker than currently available strongest constraints, but benefit from increased reliability and independence of systematic effects.The constraints derived from the e…
The normal Casimir force between a sinusoidally corrugated gold coated plate and a sphere was measured at various angles between the corrugations using an atomic force microscope. A strong dependence on the orientation angle of the corrugation is found. The measured forces were found to deviate from the proximity force approximation and are in agreement with the theory based on the gradient expansion including correlation effects of geometry and material properties. We analyze the role of temperature. The obtained results open new opportunities for control of the Casimir effect in micromechani…
We report stronger constraints on the parameters of Yukawa-type corrections to Newtonian gravity from measurements of the lateral Casimir force between sinusoidally corrugated surfaces of a sphere and a plate. In the interaction range from 1.6 to 14 nm the strengthening of previously known high confidence constraints up to a factor of $2.4\times 10^7$ is achieved using these measurements. It is shown that the replacement of a plane plate with a corrugated one in the measurements of the normal Casimir force by means of an atomic force microscope would result in the strengthening of respective h…
We study the lateral Casimir force experienced by a particle that rotates near a planar surface. The origin of this force lies in the symmetry breaking induced by the particle rotation in the vacuum and thermal fluctuations of its dipole moment, and, therefore, in contrast to lateral Casimir forces previously described in the literature for corrugated surfaces, it exists despite the translational invariance of the planar surface. Working within the framework of fluctuational electrodynamics, we derive analytical expressions for the lateral force and analyze its dependence on the geometrical an…
In this paper we calculate the Casimir-Polder force density (force per unit area acting on the elements of the surface) on a metallic plate placed in front of a neutral atom. To obtain the force density we use the quantum operator associated to the electromagnetic stress tensor. We explicitly show that the integral of this force density over the plate reproduces the total force acting on the plate. This result shows that, although the force is obtained as a sum of surface element-atom contributions, the stress-tensor method includes also nonadditive components of Casimir-Polder forces in the e…
The Casimir effect is a force arising in the macroscopic world as a result of radiation pressure of vacuum fluctuations. It thus plays a key role in the emerging domain of nano-electro-mechanical systems (NEMS). This role is reviewed in the present paper, with discussions of the influence of the material properties of the mirrors, as well as the geometry dependence of the Casimir effect between corrugated mirrors. In particular, the lateral component of the Casimir force and restoring torque between metal plates with misaligned corrugations are evaluated.
We demonstrate that the approach by Rodrigues et al. (PRL, v.96, 100402, 2006) to the description of the lateral Casimir force between corrugated surfaces is in disagreement with a path-integral theory by Emig et al. (PRA, v.67, 022114, 2003), and the approximations used are not appropriate for comparison to experiment.
We discuss the scalar analogue of the Casimir-Polder force between a sphere and a uniaxially corrugated surface with Dirichlet boundary conditions. Presenting a formulation that is nonperturbative in the height profile of the surface, we give explicit numerical results for a sinuosoidal corrugation profile.
We present calculations of the quantum and thermal Casimir interaction between real mirrors in electromagnetic fields using the scattering approach. We begin with a pedagogical introduction of this approach in simple cases where the scattering is specular. We then discuss the more general case of stationary arbitrarily shaped mirrors and present in particular applications to two geometries of interest for experiments, that is corrugated plates and the plane-sphere geometry. The results nicely illustrate the rich correlations existing between material properties, temperature and geometry in the…
The lateral Casimir force between a sinusoidally corrugated gold coated plate and large sphere was measured for surface separations between 0.2 $μ$m to 0.3 $μ$m using an atomic force microscope. The measured force shows the required periodicity corresponding to the corrugations. It also exhibits the necessary inverse fourth power distance dependence. The obtained results are shown to be in good agreement with a complete theory taking into account the imperfectness of the boundary metal. This demonstration opens new opportunities for the use of the Casimir effect for lateral translation in micr…
A novel approach for calculating Casimir forces between periodically deformed objects is developed. This approach allows, for the first time, a rigorous non-perturbative treatment of the Casimir effect for disconnected objects beyond Casimir's original two-plate configuration. The approach takes into account the collective nature of fluctuation induced forces, going beyond the commonly used pairwise summation of two-body van der Waals forces. As an application of the method, we exactly calculate the Casimir force due to scalar field fluctuations between a flat and a rectangular corrugated plat…
The nonlinear dynamics of a cylindrical pinion that is kept at a distance from a vibrating rack is studied, and it is shown that the lateral Casimir force between the two corrugated surfaces can be rectified. The effects of friction and external load are taken into account and it is shown that the pinion can do work against loads of up to a critical value, which is set by the amplitude of the lateral Casimir force. We present a phase diagram for the rectified motion that could help its experimental investigations, as the system exhibits a chaotic behavior in a large part of the parameter space…
We argue that the appropriate variable to study a non trivial geometry dependence of the Casimir force is the lateral component of the Casimir force, which we evaluate between two corrugated metallic plates outside the validity of the Proximity Force Approximation (PFA). The metallic plates are described by the plasma model, with arbitrary values for the plasma wavelength, the plate separation and the corrugation period, the corrugation amplitude remaining the smallest length scale. Our analysis shows that in realistic experimental situations the Proximity Force Approximation overestimates the…
The lateral Casimir-Polder force between an atom and a corrugated surface should allow one to study experimentally non trivial geometrical effects in quantum vacuum. Here, we derive the theoretical expression of this force in a scattering approach that accounts for the optical properties of the corrugated surface. We show that large corrections to the ``proximity force approximation'' could be measured using present-day technology with a Bose-Einstein condensate used as a vacuum field sensor.
Measurements of the Casimir force are used to obtain stronger constraints on the parameters of hypothetical interactions predicted in different unification schemes beyond the Standard Model. We review new strong constraints on the Yukawa-type interactions derived during the last two years from recent experiments on measuring the lateral Casimir force, Casimir force in configurations with corrugated boundaries and the Casimir-Polder force. Specifically, from measurements of the lateral Casimir force compared with the exact theory the strengthening of constraints up to a factor of 24 millions wa…
The coupling between corrugated surfaces due to the lateral Casimir force is employed to propose a nanoscale mechanical device composed of two racks and a pinion. The noncontact nature of the interaction allows for the system to be made frustrated by choosing the two racks to move in the same direction and forcing the pinion to choose between two opposite directions. This leads to a rich and sensitive phase behavior, which makes the device potentially useful as a mechanical {\em sensor} or {\em amplifier}. The device could also be used to make a mechanical {\em clock} signal of tunable frequen…
We review the relation between Casimir effect and geometry, emphasizing deviations from the commonly used Proximity Force Approximation (PFA). We use to this aim the scattering formalism which is nowadays the best tool available for accurate and reliable theory-experiment comparisons. We first recall the main lines of this formalism when the mirrors can be considered to obey specular reflection. We then discuss the more general case where non planar mirrors give rise to non-specular reflection with wavevectors and field polarisations mixed. The general formalism has already been fruitfully use…
We apply a perturbative approach to evaluate the Casimir energy for a massless real scalar field in 3+1 dimensions, subject to Dirichlet boundary conditions on two surfaces. One of the surfaces is assumed to be flat, while the other corresponds to a small deformation, described by a single function $η$, of a flat mirror. The perturbative expansion is carried out up to the fourth order in the deformation $η$, and the results are applied to the calculation of the Casimir energy for corrugated mirrors in front of a plane. We also reconsider the proximity force approximation within the context of …
We describe a Casimir setup consisting of two aligned sinusoidally corrugated Ni surfaces, one of which is "hidden" by a thin opaque layer of gold with a flat exposed surface. The gold layer acts as a low-pass filter that allows for a clean observation of the controversial thermal Casimir force between the corrugations, with currently available Casimir apparatuses. The proposed scheme of measurement, based on the phase-dependent modulation of the Casimir force, requires no electrostatic calibrations of the apparatus, and is unaffected by uncertainties in the knowledge of the optical properties…
For more than 35 years theorists have studied quantum or Casimir friction, which occurs when two smooth bodies move transversely to each other, experiencing a frictional dissipative force due to quantum electromagnetic fluctuations, which break time-reversal symmetry. These forces are typically very small, unless the bodies are nearly touching, and consequently such effects have never been observed, although lateral Casimir forces have been seen for corrugated surfaces. Partly because of the lack of contact with phenomena, theoretical predictions for the frictional force between parallel plate…
Casimir interactions between macroscopic objects are strongly influenced by their geometrical features as shape and orientation as well as by their material properties. The effect of geometry is commonly obtained from the proximity approximation (PA). Here we present a path integral quantization for the electromagnetic field in the presence of deformed metallic surfaces. From the resulting effective action the Casimir force between the surfaces can be calculated without the PA. For corrugated surfaces the force is obtained both perturbatively for small deformations and by a numerical approach …
We review the theory of the Casimir effect using scattering techniques. After years of theoretical efforts, this formalism is now largely mastered so that the accuracy of theory-experiment comparisons is determined by the level of precision and pertinence of the description of experimental conditions. Due to an imperfect knowledge of the optical properties of real mirrors used in the experiment, the effect of imperfect reflection remains a source of uncertainty in theory-experiment comparisons. For the same reason, the temperature dependence of the Casimir force between dissipative mirrors rem…
We study the geometry dependence of the Casimir energy for deformed metal plates by a path integral quantization of the electromagnetic field. For the first time, we give a complete analytical result for the deformation induced change in Casimir energy δ\cal E in an experimentally testable, nontrivial geometry, consisting of a flat and a corrugated plate. Our results show an interesting crossover for δ\cal E as a function of the ratio of the mean plate distance H, to the corrugation length λ: For λ\ll H we find a {\em slower} decay \sim H^{-4}, compared to the H^{-5} behavior predicted by the …
We calculate the dispersive force between a ground state atom and a non planar surface. We present explicit results for a corrugated surface, derived from the scattering approach at first order in the corrugation amplitude. A variety of analytical results are derived in different limiting cases, including the van der Waals and Casimir-Polder regimes. We compute numerically the exact first-order dispersive potential for arbitrary separation distances and corrugation wavelengths, for a Rubidium atom on top of a silicon or gold corrugated surface. We discuss in detail the inadequacy of the proxim…
The lateral Casimir force between two corrugated metallic plates makes possible a study of the nontrivial interplay of geometry and Casimir effect appearing beyond the regime of validity of the Proximity Force Approximation (PFA). Quantitative evaluations can be obtained by using scattering theory in a perturbative expansion valid when the corrugation amplitudes are smaller than the three other length scales: the mean separation distance $L$ of the plates, the corrugation period $λ_\C$ and the plasma wavelength $λ_¶$. Within this perturbative expansion, evaluations are obtained for arbitrary r…
We discuss recent experimental and theoretical results on the Casimir force between real material bodies made of different materials. Special attention is paid to calculations of the normal Casimir force acting perpendicular to the surface with the help of the Lifshitz theory taking into account the role of free charge carriers. Theoretical results for the thermal Casimir force acting between metallic, dielectric and semiconductor materials are presented and compared with available experimental data. Main attention is concentrated on the possibility to control the magnitude and sign of the Cas…
We discuss the strongest constraints on the Yukawa-type corrections to Newton's gravitational law within a submicrometer interaction range following from measurements of the Casimir force. In this connection the complicated problems arising when comparing the measurement data with the Lifshitz theory are analyzed. Special attention is paid to the results of two recent experiments on measuring the Casimir interaction between ferromagnetic surfaces and sinusoidally corrugated surfaces at various angles between corrugations.
In this thesis, I analyse the electromagnetic properties of dynamical metasurfaces and find two critical phenomena. The first is the Casimir-induced instability of a deformable metallic film. In general, two charge-neutral interfaces attract with or repel each other due to the contribution from the zero-point fluctuation of the electromagnetic field between them, namely, the Casimir effect. The effects of perturbative interface corrugation on the Casimir energy in the film system is studied by the proximity force approximation with dispersion correction. If the corrugation period exceeds a cri…
