Radio astronomy observations in the coming decade will require new levels of sensitivity while mapping large regions of space with much greater efficiency than is achieved with current telescopes. This requires new instrumentation with the greatest achievable sensitivity, dynamic range, and field of view. Receiver noise is quickly approaching fundamental limits at most radio wavelengths, so significant gains in sensitivity can only be made by increasing collecting area. Jointly, these requirements suggest using large arrays of smaller antennas, or many moderate-size antennas equipped with multi-beam arrays. The challenge is to develop receivers and wide bandwidth data transport systems which are lower cost, more compact, more reliable, lower weight, and more reproducible than the best current systems, with no compromise to performance. This can be achieved with a greater degree of component integration, extensive use of digital signal processing and transport, and replacement of functions currently performed in bulky waveguide and coaxial cable components with digital arithmetic and thin optical fibers. In this white paper, we outline the complete redesign and re-optimization of receiver architecture to take advantage of the latest advancements in commercial technology. This involves the seamless integration of the conversions from RF to baseband, from analog to digital, and from copper to fiber within a single receiver module.
RF system-on-chip (RFSoC) devices provide the potential for implementing a complete radio astronomy receiver on a single board, but performance of the integrated analogue-to-digital converters is critical. We have evaluated the performance of the data converters in the Xilinx ZU28DR RFSoC, which are 12-bit, 8-fold interleaved converters with a maximum sample speed of 4.096 Giga-sample per second (GSPS). We measured the spurious-free dynamic range (SFDR), signal-to-noise and distortion (SINAD), effective number of bits (ENOB), intermodulation distortion (IMD) and cross-talk between adjacent cha…
This paper presents a survey of microwave front-end receivers installed at radio telescopes throughout the World. This unprecedented analysis was conducted as part of a review of front-end developments for Italian radio telescopes, initiated by the Italian National Institute for Astrophysics in 2016. Fifteen international radio telescopes have been selected to be representative of the instrumentation used for radio astronomical observations in the frequency domain from 300 MHz to 116 GHz. A comprehensive description of the existing receivers is presented and their characteristics are compared …
Dual sideband (2SB) receivers are well suited for the spectral observation of complex astronomical signals over a wide frequency range. They are extensively used in radio astronomy, their main advantages being to avoid spectral confusion and to diminish effective system temperature by a factor two with respect to double sideband (DSB) receivers. Using available millimeter-wave analog technology, wideband 2SB receivers generally obtain sideband rejections ratios (SRR) of 10-15dB, insufficient for a number of astronomical applications. We report here the design and implementation of an FPGA-base…
The requirements on the stability of the frequency reference in the Square Kilometre Array (SKA), as a radio astronomy interferometer, are given in terms of maximum accepted degree of coherence loss caused by the instability of the frequency reference. In this paper we analyse the relationship between the characterisation of the instability of the frequency reference in the radio astronomy array and the coherence loss. The calculation of the coherence loss from the instability characterisation given by the Allan deviation is reviewed. Some practical aspects and limitations are analysed.
This review gives an introduction to spectrometers and discusses their use within radio astronomy. While a variety of technologies are introduced, particular emphasis is given to digital systems. Three different types of digital spectrometers are discussed: autocorrelation spectrometers, Fourier transform spectrometers, and polyphase filterbank spectrometers. Given their growing ubiquity and significant advantages, polyphase filterbanks are detailed at length. The relative advantages and disadvantages of different spectrometer technologies are compared and contrasted, and implementation consid…
This chapter introduces the concepts of polarimetry in the case of low frequency radio astronomy. In this regime radio waves are usually not the signature of atomic or molecular transitions lines, but rather that of unstable particle distribution functions releasing their free energy through electromagnetic radiation. As the radio source region is usually magnetized, the propagation medium (at least close to the source) is anisotropic, and the polarization depends on the local magnetic field direction, the propagation mode and the direction of propagation.
A major challenge in modern radio astronomy is dealing with the massive data volumes generated by wide-bandwidth receivers. Such massive data rates are often too great for a single device to cope, and so processing must be split across multiple devices working in parallel. These devices must work in unison to process incoming data in real time, reduce the data volume to a manageable size, and output a science-ready data product. The aim of this chapter is to give a broad overview of how digital systems for radio telescopes are commonly implemented, with a focus on real-time stream processing o…
Radio astronomy has experienced phenomenal progress in recent years due to advances in digital technologies and processing speed, the development of new technologies, and the prospect for new powerful facilities A new generation of radio interferometers is opening new windows to the Universe. LOFAR, the world largest telescope, extended the classical radio window at low frequencies. ALMA started a new era at millimetre wavelengths and the planned SKA will revolutionize the sciences of the Universe, well beyond the traditional limits of astronomy. Radio astronomy research is making leaps with e…
Modelling steerable beams of satellite constellations for radio astronomy impact studies
SKA Observatory（平方公里阵列望远镜观测台）；IAU Centre for the Protection of the Dark and Quiet Sky from Satellite Constellation Interference（国际天文学联合会暗静天空保护中心）；Onsala Space Observatory, Chalmers University of Technology（翁萨拉空间天文台，查尔姆斯理工大学）
4GREAT is an extension of the German Receiver for Astronomy at Terahertz frequencies (GREAT) operated aboard the Stratospheric Observatory for Infrared Astronomy (SOFIA). The spectrometer comprises four different detector bands and their associated subsystems for simultaneous and fully independent science operation. All detector beams are co-aligned on the sky. The frequency bands of 4GREAT cover 491-635, 890-1090, 1240-1525 and 2490-2590 GHz, respectively. This paper presents the design and characterization of the instrument, and its in-flight performance. 4GREAT saw first light in June 2018,…
Radio Frequency Interference (RFI) has historically plagued radio astronomy, worsening with the rapid spread of electronics and increasing telescope sensitivity. We present a multi-dimensional probabilistic framework for characterising the RFI environment around a radio astronomy site that uses automatically flagged data from the array itself. We illustrate the framework using about 1500 hours of commissioning data from the MeerKAT radio telescope; producing a 6-dimensional array that yields both average RFI occupancy as well as confidence intervals around the mean as a function of key variabl…
The GRANDProto300 (GP300) experiment is the first stage of the Giant Radio Array for Neutrino Detection (GRAND) project. It will be deployed between 2020 and 2021 in a radio-quiet area, at $3000\,$m of altitude at the rim of the Tibetan plateau, over a total surface of $200\,$km$^2$. The primary goal of GP300 is to demonstrate the viability of the GRAND detection concepts. It will provide a unique test bench to develop and validate new identification and reconstruction techniques for the radio detection of very inclined air-showers, in the perspective of the next stages of GRAND. GP300 also pr…
We present the first survey of radio frequency interference (RFI) at the future site of the low frequency Square Kilometre Array (SKA), the Murchison Radio-astronomy Observatory (MRO), that both temporally and spatially resolves the RFI. The survey is conducted in a 1 MHz frequency range within the FM band, designed to encompass the closest and strongest FM transmitters to the MRO (located in Geraldton, approximately 300 km distant). Conducted over approximately three days using the second iteration of the Engineering Development Array in an all-sky imaging mode, we find a range of RFI signals…
We developed a GPU based single-pulse search pipeline (GSP) with candidate-archiving database. Largely based upon the infrastructure of Open source pulsar search and analysis toolkit (PRESTO), GSP implements GPU acceleration of the de-dispersion and integrates a candidate-archiving database. We applied GSP to the data streams from the commensal radio astronomy FAST survey (CRAFTS), which resulted in a quasi-real-time processing. The integrated candidate database facilitates synergistic usage of multiple machine-learning tools and thus improves efficient identification of radio pulsars such as …
Data collection for scientific applications is increasing exponentially and is forecasted to soon reach peta- and exabyte scales. Applications which process and analyze scientific data must be scalable and focus on execution performance to keep pace. In the field of radio astronomy, in addition to increasingly large datasets, tasks such as the identification of transient radio signals from extrasolar sources are computationally expensive. We present a scalable approach to radio pulsar detection written in Scala that parallelizes candidate identification to take advantage of in-memory task proc…
Closure phases and closure amplitudes have proven critical to modern radio interferometry due to their insensitivity to the uncertain station gains. We present the first set of closure quantities constructed from parallel-hand and cross-hand visibilities that are insensitive to both station gains and to polarimetric leakage. These complex "closure traces" are a natural extension of closure amplitudes and closure phases, are independent of all station-based linear corruptions of the polarized visibilities, and are complete in the sense that they contain all remaining information present in the …
Electrical coupling of a horizontal dipole antenna to a dielectric half-space: applications to radio astronomy from the lunar surface
Lawrence Berkeley National Laboratory（劳伦斯伯克利国家实验室）；University of California, Berkeley（加州大学伯克利分校）；The Blackett Laboratory, Imperial College London（帝国理工学院布莱克特实验室）；Brookhaven National Laboratory（布鲁克海文国家实验室）
