arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 0908.2879physics.class-ph
收藏

车削中的自激振动:力扭转分析

Self-excited vibrations in turning : Forces torsor analysis

Claudiu-Florinel Bisu, Alain Gérard, Jean-Yves K'Nevez, Raynald Laheurte, Olivier Cahuc

摘要:

本工作涉及确定必要的参数考虑三维模型,以模拟在现实的方式在机床上的车削过程。本文研究了自激振动对工件/刀具/材料系统各种主要力学特性的影响。使用六分量测力计的作用力(力和力矩)测量证实了工具尖端力矩的存在。190 Hz的基频被证明对于工具尖端点位移、作用施加点或施加到工具尖端点的扭矩是共同的。位移和力的结果的对抗表明,这些元素的应用点按照位于准全同平面上的相似椭圆演化。这些椭圆的大小轴随着进给量运动值的增加而增加,这与注入系统的机械功率相对应。相反,这些椭圆的各自的轴比是进给量的递减函数,而当进给量值增加时,这些比率的比率保持恒定。此外,还给出了一些切屑特征,如厚度变化、宽度或硬化现象。

英文摘要:

The present work deals with determining the necessary parameters considering a three dimensional model to simulate in a realistic way the turning process on machine tool. This paper is dedicated to the study of the self-excited vibrations incidence on various major mechanics characteristics of the system workpiece / tool / material. The efforts (forces and moments) measurement using a six components dynamometer confirms the tool tip moments existence. The fundamental frequency of 190 Hz proves to be common to the tool tip point displacements, the action application point or at the torque exerted to the tool tip point. The confrontation of the results concerning displacements and efforts shows that the applications points of these elements evolve according to similar ellipses located in quasi identical planes. The large and the small axes of these ellipses are increasing with the feed rate motion values accordingly to the mechanical power injected into the system. Conversely, the respective axes ratios of these ellipses are decreasing functions of the feed rate while the ratio of these ratios remains constant when the feed rate value is increasing. In addition, some chip characteristics are given, like the thickness variations, the width or the hardening phenomenon.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑