车削加工中自激振动的位移分析
Displacements analysis of self-excited vibrations in turning
摘要:
实际的研究涉及确定一个新的协议,考虑到一个三维模型,以模拟在现实的方式在机床上的车削过程中的必要参数。本文对块体刀具/块体工件自激振动的位移进行了实验分析。结合车削过程,从两个加速度计的频谱出发,得到了自激振动域。揭示了存在一个附着在刀刃点上的位移平面。该平面证明与机床轴线相比是倾斜的。我们建立了工具尖端点描述一个椭圆。该椭圆非常小,可以被认为是用于稳定切割过程(没有振动)的小直线段。在不稳定的模式(振动)的椭圆位移确实是更明显。在径向方向上和切削方向上的刀尖位移之间出现相位差。进给运动方向和切削运动方向几乎是同相的。长椭圆轴和小椭圆轴的值(以及它们的比率)表明这些尺寸随着进给量值而增加。穿过刚度中心和工具尖端的轴表示最大刚度方向。最大值(resp)工具的最小)刚度轴垂直于工具的大(或最小)刚度轴。小)椭圆位移轴。对加速度计信号的FFT分析允许达到几个重要参数,并在工具尖端位移和所测试的机床部件的静弹性特性之间建立相干相关性。
英文摘要:
The actual research deals with determining by a new protocol the necessary parameters considering a three-dimensional model to simulate in a realistic way the turning process on machine tool. This paper is dedicated to the experimental displacements analysis of the block tool / block workpiece with self-excited vibrations. In connexion with turning process, the self-excited vibrations domain is obtained starting from spectra of two accelerometers. The existence of a displacements plane attached to the tool edge point is revealed. This plane proves to be inclined compared to the machines tool axes. We establish that the tool tip point describes an ellipse. This ellipse is very small and can be considered as a small straight line segment for the stable cutting process (without vibrations). In unstable mode (with vibrations) the ellipse of displacements is really more visible. A difference in phase occurs between the tool tip displacements on the radial direction and on the cutting one. The feed motion direction and the cutting one are almost in phase. The values of the long and small ellipse axes (and their ratio) shows that these sizes are increasing with the feed rate value. The axis that goes through the stiffness center and the tool tip represents the maximum stiffness direction. The maximum (resp. minimum) stiffness axis of the tool is perpendicular to the large (resp. small) ellipse displacements axis. FFT analysis of the accelerometers signals allows to reach several important parameters and establish coherent correlations between tool tip displacements and the static - elastic characteristics of the machine tool components tested.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。