We discuss the binding energy E_b of impurities in semiconductors within density functional theory (DFT) and the GW approximation, focusing on donors in nanowires as an example. We show that DFT succeeds in the calculation of E_b from the Kohn-Sham (KS) hamiltonian of the ionized impurity, but fails in the calculation of E_b from the KS hamiltonian of the neutral impurity, as it misses most of the interaction of the bound electron with the surface polarization charges of the donor. We trace this deficiency back to the lack of screened exchange in the present functionals.
The incorporation of impurities during the chemical synthesis of nanomaterials is usually uncontrolled and rarely reported because of the formidable challenge that constitutes measuring trace amounts of often light elements with sub nanometre spatial resolution. Yet these foreign elements influence functional properties, by e.g. doping. Here we demonstrate how the synthesis and partial reduction reaction on hollow TiO2 nanowires leads to the introduction of parts-per-millions of boron, sodium, and nitrogen from the reduction reaction with sodium borohydride at the surface of the TiO2 nanowire.…
In this work we have employed density-functional theory with hybrid functionals to investigate the atomic and electronic structure of bare and hydrogenated Mn doped ZnO nanowires with small diameter. We determine changes in magnetic and electronic structure of Mn-doped ZnO nanowires due to surface effects, such as hydrogen adsorption on the surface, presence of oxygen vacancies and dangling bonds. In the absence of passivation on the nanowire surface, the manganese atoms segregate to the surface, whereas under hydrogen adsorption the incorporation of Mn is energetically more favourable at inne…
Using ab initio methods based on the density functional theory, we investigate the segregation and formation energies for various dopants (Si, Be, Zn, Sn), commonly used to obtain p- or ntype conductivity in GaAs and InAs nanowires. The distribution of Au and O atoms, which may be unintentionally incorporated during the wire growth, is also studied. The calculations performed for nanowires of zinc blende and wurtzite structure show that the distribution of most of the impurities depends on the crystal structure of the wires. For example, it is shown that the same growth conditions can lead to …
We performed an {\it ab initio} investigation on the properties of rutile tin oxide (SnO$_{x}$) nanowires. We computed the wire properties determining the equilibrium geometries, binding energies and electronic band structures for several wire dimensions and surface facet configurations. The results allowed to establish scaling laws for the structural properties, in terms of the nanowire perimeters. The results also showed that the surface states control most of the electronic properties of the nanowires. Oxygen incorporation in the nanowire surfaces passivated the surface-related electronic s…
Effects of doping on morphology of iron carbide (cementite) nanowires have been explored by first principle electronic structure calculations. We examined the role of several realistic impurities (Si, Mn, V, P and S) in the formation energies of the cementite nanowires with different sizes and morphologies. It is shown that the presence of the impurities decreases the formation energy and can switch the preferable axis of the cementite nanowire growth. The conditions of the formation and decomposition of cementite nanowires in steels are also discussed.
In this paper some specific issues related to point defects in GaAs nanowires are addressed with the help of density functional theory calculations. These issues mainly arise from the growth of nanowires under conditions different from those used for thin films or bulk GaAs, such as the co-existence of zincblende and wurtzite polytypes, the use of gold particles as catalyst, and the arsenic-limited growth regime. Hence, we carry out density-functional calculations for As vacancies, Ga_As antisites, and Au impurities in ZB and WZ GaAs crystals. Our results show that As vacancies can diffuse wit…
Using ab initio calculations based on density-functional theory we have performed a theoretical investigation of substitutional boron and nitrogen impurities in silicon carbide (SiC) nanoribbons. We have considered hydrogen terminated SiC ribbons with zigzag and armchair edges. In both systems we verify that the boron and nitrogen atoms energetically prefer to be localized at the edges of the nanoribbons. However, while boron preferentially substitutes a silicon atom, nitrogen prefers to occupy a carbon site. In addition, our electronic-structure calculations indicate that (i) substitutional b…
Using the first-principles density-functional approach, magnetic properties of Mn-, Fe-, Co-, and Ni-doped rutile TiO2 were investigated for two different impurity concentrations (25% and 6.25%). Calculations were performed with the Full-Potential Linearized-Augmented Plane Waves (FLAPW) method, assuming that the magnetic impurities substitutionally replace the Ti ions. Our results show that the systems (with the exception of Ni-doped TiO2) are ferromagnetic. We also found that polarization mainly occurs at the impurity sites, and the magnetic moments of the impurities are independent of the i…
In this paper, we study the vulnerability of 5nm node FinFET and nanowire (20nm gate length) and their corresponding SRAM under radiation. Ab initio tools, SRIM, PHITS, and GEANT4, are used to find the Linear Energy Transfer (LET) of neutron and alpha particles in Silicon and Silicon-Germanium. Technology Computer-Aided Design (TCAD) is then used to find the most vulnerable incident location and direction in FinFET, nanowire, and their SRAM. Full 3D TCAD simulation, which allows the study of layout effect in SRAM, is used. It is found that NW is about 2-3 times more robust than FinFET in terms…
The stability and electronic structure of a single monatomic Al wire has been studied using the ab initio pseudopotential method. The Al wire undergoes two structural rearrangements under compression, i.e., zigzag configurations at angles of $140^o$ and $60^o$. The evolution of electronic structures of the Al chain as a function of structural phase transition has been investigated. The relationship between electronic structure and geometric stability is also discussed. The 2p bands in the Al nanowire are shown to play a critical role in its stability. The effects of density functionals (GGA an…
We performed first-principles calculations to investigate the possible magnetism induced by the different concentrations of non-magnetic impurities and vacancies in BN sheet. The atoms of Be, B, C, N, O, Al and Si are used to replace either B or N in the systems as impurities. We discussed the changes in density of states as well as the extent of the spatial distributions of the defect states, the possible formation of magnetic moments, the magnitude of the magnetization energies and finally the exchange energies due to the presence of these defects. It is shown that the magnetization energies…
An ab initio study of the doping of alkali halide crystals (AX: A = Li, Na, K, Rb; X = F, Cl, Br, I) by ns2 anions (Ag- and Cu-) is presented. Large active clusters with 179 ions embedded in the surrounding crystalline lattice are considered in order to describe properly the lattice relaxation induced by the introduction of substitutional impurities. In all the cases considered, the lattice distortions imply the concerted movement of several shells of neighbors. The shell displacements are smaller for the smaller anion Cu-, as expected. The study of the family of rock-salt alkali halides (exce…
It is found that all the zigzag chains except the nonmagnetic (NM) Ni and antiferromagnetic (AF) Fe chains which form a twisted two-legger ladder, look like a corner-sharing triangle ribbon, and have a lower total energy than the corresponding linear chains. All the 3d transition metals in both linear and zigzag structures have a stable or metastable ferromagnetic (FM) state. The electronic spin-polarization at the Fermi level in the FM Sc, V, Mn, Fe, Co and Ni linear chains is close to 90% or above. In the zigzag structure, the AF state is more stable than the FM state only in the Cr chain. I…
A nanorod structure has been observed on the Ho/Ge(111) surface using scanning tunneling microscopy (STM). The rods do not require patterning of the surface or defects such as step edges in order to grow as is the case for nanorods on Si(111). At low holmium coverage the nanorods exist as isolated nanostructures while at high coverage they form a periodic 5x1 structure. We propose a structural model for the 5x1 unit cell and show using an ab initio calculation that the STM profile of our model structure compares favorably to that obtained experimentally for both filled and empty states samplin…
In this work we study the structural stability and electronic properties of the Beryllium sulphide nanowires (NWs) in both zinc blende (ZB) and wurtzite (WZ) phases with triangle and hexagonal cross section, using first principle calculations within plane-wave pseudopotential method. A phenomenological model is used to explain the role of dangling bonds in the stability of the NWs. In contrast to the bulk phase, ZB-NWs with diameter less than 133.3 (angstrom) are found to be less favorable over WZ-NWs, in which the surface dangling bonds (DBs) on the NW facets play an important role to stabili…
Using {\it ab initio} total energy density-functional theory calculations, we investigate the electronic, structural and magnetic properties of Manganese doped Germanium nanowires. The nanowires have been constructed along the [110] direction and the dangling bonds on the surface have been saturated by hydrogen atoms. We observed that the Mn has lower formation energy at the center of the wire when compared to regions close to the surface. The Mn-Mn coupling has lower energy for a high-spin configuration except when they are first nearest neighbors. These results show that Ge:Mn nanowires are …
The localized effect of impurities in single GaN nanowires in the sub-diffraction limit is reported using the study of lattice vibrational modes in the evanescent field of Au nanoparticle assisted tip enhanced Raman spectroscopy (TERS). GaN nanowires with the O impurity and the Mg dopants were grown by the chemical vapor deposition technique in the catalyst assisted vapor-liquid-solid process. Symmetry allowed Raman modes of wurtzite GaN are observed for undoped and doped nanowires. Unusually very strong intensity of the non-zone center zone boundary mode is observed for the TERS studies of bo…
Here we present a novel approach to control magnetic interactions in atomic-scale nanowires. Our ab initio calculations demonstrate the possibility to tune magnetic properties of Fe nanowires formed on vicinal Cu surfaces. Both intrawire and interwire magnetic exchange parameters are extracted from DFT calculations. This study suggests that the effective interwire magnetic exchange parameters exhibit Ruderman--Kittel--Kasuya--Yosida-like (RKKY) oscillations as a function of Fe interwire separation. The choice of vicinal Cu surface offers possibilities for controlling the magnetic coupling. Fur…
Multi-crystalline silicon is widely used for producing low-cost and high-efficiency solar cells. During crystal growth and device fabrication, silicon solar cells contain grain boundaries (GBs) which are preferential segregation sites for atomic impurities such as oxygen atoms. GBs can induce charge carriers recombination significantly reducing carrier lifetimes and therefore they can be detrimental for Si device performance. We studied the correlation between structural, energetic and electronic properties of Σ3{111} Si GB in the presence of vacancies, strain and multiple O segregation. The s…
The mobility of charge carriers in a semiconductor nanowire is explored as a function of increasing radius, assuming low temperatures where impurity scattering dominates. The competition between increased cross-section and the concurrent increase in available scattering channels causes strongly non-monotonic dependence of the mobility on the radius. The inter-band scattering causes sharp declines in the mobility at the wire radii at which each new channel becomes available. At intermediate radii with the number of channels unchanged the mobility is seen to maintain an exponential growth even w…
We report an ab initio study of the electric-field gradient tensor (EFG) at Cd impurities located at both inequivalent cationic sites in the semiconductor In2O3. Calculations were performed with the FLAPW method, that allows us to treat the electronic structure of the doped system and the atomic relaxations introduced by the impurities in the host lattice in a fully self-consistent way. From our results for the EFG (in excellent agreement with the experiments), it is clear that the problem of the EFG at impurities in In2O3 cannot be described by the point-charge model and antishielding factors…
The approach proposed by Choi and Ihm for calculating the ballistic conductance of open quantum systems is generalized to deal with magnetic transition metals. The method has been implemented with ultrasoft pseudopotentials and plane wave basis set in a DFT-LSDA ab-initio scheme. We present the quantum-mechanical conductance calculations for monatomic Ni nanowire with a single spin reversal. We find that a spin reversal blocks the conductance of $d$ electrons at the Fermi energy of the Ni nanowire. On the other hand, two $s$ electrons (one per each spin) are perfectly transmitted in the whole …
Ab-initio calculations within Density Functional Theory combined with experimental Raman spectra on cluster-beam deposited pure carbon films provide a consistent picture of sp-carbon chains stabilized by sp^3 or sp^2 terminations, the latter being sensitive to torsional strain. This unexplored effect promises many exciting applications since it allows one to modify the conductive states near the Fermi level and to switch on and off the on-chain pi-electron magnetism.
Our predictions, based on density-functional calculations, reveal that surface doping of ZnO nanowires with Bi leads to a linear-in-$k$ splitting of the conduction-band states, through spin-orbit interaction, due to the lowering of the symmetry in the presence of the dopant. This finding implies that spin polarization of the conduction electrons in Bi-doped ZnO nanowires could be controlled with applied electric (as opposed to magnetic) fields, making them candidate materials for spin-orbitronic applications. Our findings also show that the degree of spin splitting could be tuned by adjusting …
Understanding the detailed electronic structure of deep defect states in narrow band-gap semiconductors has been a challenging problem. Recently, self-consistent ab initio calculations within density functional theory (DFT) using supercell models have been successful in tackling this problem. In this paper, we carry out such calculations in PbTe, a well-known narrow band-gap semiconductor, for a large class of defects: cationic and anionic substitutional impurities of different valence, and cationic and anionic vacancies. For the cationic defects, we study a series of compounds RPb2n-1Te2n, wh…
We present the ab initio results of the structural and magnetic properties of the Pd host matrix implanted with Fe solute atoms at various concentrations. By means of density functional theory we confirm that iron impurities are able to initialize significant magnetization of the Pd atoms, when the impurity consentation exceeds 3 at.%. Besides, we demonstrate that the imposed magnetization depends on impurity positions in the host matrix, in particular, there is a maximum of magnetization for a uniform distribution of the iron impurity.
Dislocation core properties of Al with and without H impurities are studied using the Peierls-Nabarro model with parameters determined by ab initio calculations. We find that H not only facilitates dislocation emission from the crack tip but also enhances dislocation mobility dramatically, leading to macroscopically softening and thinning of the material ahead of the crack tip. We observe strong binding between H and dislocation cores, with the binding energy depending on dislocation character. This dependence can directly affect the mechanical properties of Al by inhibiting dislocation cross-…
Density functional theory was applied to study influence of the isolated impurity located on the regular site of the alpha-Fe crystal on the charge and spin density (hyperfine interactions) on the iron nucleus. Calculations were performed by using both pseudopotential and the full potential methods. The scalar relativistic approximation was applied. Perturbations of the charge and spin density on iron were calculated for all d impurities soluble in iron and additionally for Ga impurity. It was found that impurities have measurable effect on the iron charge and spin density up to the second or …
We determine the structural relaxations around paramagnetic impurities (Ti, Cr, Fe) in corundum (alpha-Al2O3), by combining x-ray absorption near edge structure (XANES) experiments and ab initio calculations. The structural relaxations are found to be very local. We then show that XANES is sensitive to small variations in interatomic distances within the coordination shell of the absorbing atom. The experiments were carried out on single crystals of ruby and sapphires. Linear dichroic signals are essential to characterize the geometry of the impurity site. The calculations were performed withi…
We report an ab-initio comparative study of the electric-field-gradient tensor (EFG) and structural relaxations introduced by acceptor (Cd) and donor (Ta) impurities when they replace cations in a series of binary oxides: TiO2, SnO2, and In2O3. Calculations were performed with the Full-Potential Linearized-Augmented Plane Waves method that allows us to treat the electronic structure and the atomic relaxations in a fully self-consistent way. We considered different charge states for each impurity and studied the dependence on these charge states of the electronic properties and the structural r…
By employing a real-space formulation of the Kubo-Greenwood equation based on a Green's function embedding technique combined with the fully relativistic spin-polarized Korringa-Kohn-Rostoker method a detailed investigation of the electrical transport through atomic-scaled contacts between two Au(001) semi-infinite systems is presented. Following a careful numerical test of the method the conductance of Au nanocontacts with different geometries is calculated. In particular, for a contact formed by a linear chain of Au atoms a conductance near 1 $G_{0}$ is obtained. The influence of transition …
We propose a new finite-size correction scheme for the formation energy of charged defects and impurities in one-dimensional systems within density functional theory. The energy correction in a supercell geometry is obtained by solving the Poisson equation in a continuum model which is described by an anistrotropic permittivity tensor, with the defect charge distribution derived from first-principles calculations. We implement our scheme to study impurities and dangling bonds in silicon nanowires and demonstrate that the formation energy of charged defects rapidly converges with the supercell …
We consider the electronic transport properties of phosphorus (P) doped silicon nanowires (SiNWs). By combining ab initio density functional theory (DFT) calculations with a recursive Green's function method, we calculate the conductance distribution of up to 200 nm long SiNWs with different distributions of P dopant impurities. We find that the radial distribution of the dopants influences the conductance properties significantly: Surface doped wires have longer mean-free paths and smaller sample-to-sample fluctuations in the cross-over from ballistic to diffusive transport. These findings ca…
The calculations of electronic transport coefficients and optical properties require a very dense interpolation of the electronic band structure in reciprocal space that is computationally expensive and may have issues with band crossing and degeneracies. Capitalizing on a recently developed pseudo-atomic orbital projection technique, we exploit the exact tight-binding representation of the first principles electronic structure for the purposes of (1) providing an efficient strategy to explore the full band structure $E_n({\bf k})$, (2) computing the momentum operator differentiating directly …
The way doping affects the spin wave stiffness and the exchange stiffness of permalloy (Py) is investigated via ab-initio calculations, using the Korringa-Kohn-Rostoker (KKR) Green function formalism. By considering various types of dopants of different nature (V, Gd, and Pt), we are able to draw general conclusions. To describe the trends of the stiffness with doping is it sufficient to account for the exchange coupling between nearest neighbors. The polarizability of the impurities is not an important factor for the spin wave stiffness. Rather, the decisive factor is the hybridization betwee…
We present an ab initio study of the relaxations introduced in TiO2 when a Cd impurity substitutes a Ti atom and the experimental test of this calculation by a perturbed-angular-correlation (PAC) measurement of the orientation of the electric-field gradient (EFG) tensor at the Cd site. The ab-initio calculation predicts strong anisotropic relaxations of the nearest oxygen neighbors of the impurity and a change of the orientation of the largest EFG tensor component, V33, from the [001] to the [110] direction upon substitution of a Ti atom by a Cd impurity. The last prediction is confirmed by th…
We study formation of the nanowires formed after deposition of Pt on a Ge(001) surface. The nanowires form spontaneously after high temperature annealing. They are thermodynamically stable, only one atom wide and up to a few hundred atoms long. Ab initio density functional theory calculations are performed to identify possible structures of the Pt-Ge (001) surface with nanowires on top. A large number of structures is studied. With nanowires that are formed out of Pt or Ge dimers or mixed Pt-Ge dimers. By comparing simulated scanning tunneling microscopy images with experimental ones we model …
We present M-SPARC: MATLAB-Simulation Package for Ab-initio Real-space Calculations. It can perform pseudopotential spin-polarized and unpolarized Kohn-Sham Density Functional Theory (DFT) simulations for isolated systems such as molecules as well as extended systems such as crystals, surfaces, and nanowires. M-SPARC provides a rapid prototyping platform for the development and testing of new algorithms and methods in real-space DFT, with the potential to significantly accelerate the rate of advancements in the field. It also provides a convenient avenue for the accurate first principles study…
We demonstrate on the basis of ab initio simulations how passivated semiconductor surfaces can be exploited to study bulklike interaction properties and wave functions of magnetic impurities on the atomic scale with conventional and spin-polarized scanning tunneling microscopy. By applying our approach to the case of $3d$ transition metal impurities close to the H/Si$(111)$ surface, we show exemplarily that their wave functions in Si are less extended than for Mn in GaAs, thus obstructing ferromagnetism in Si. Finally, we discuss possible applications of this method to other dilute magnetic se…
The spectroscopic characteristics of systems with adsorbed d impurities on noble metal surfaces should depend on the number and geometric arrangement of the adsorbed atoms and also on their d band filling. Recent experiments using scanning tunneling microscopy have probed the electronic structure of all 3d transition metal impurities and also of Co dimers adsorbed on Au(111), providing a rich variety of results. In this contribution we correlate those experimental results with ab-initio calculations and try to establish necessary conditions for observing a Kondo resonance when using the single…
We present a comparison between accurate \textit{ab initio} calculations and a high-quality experimental data set (1986-2002) of electric-field gradients and magnetic hyperfine fields of Cd at different sites on Ni, Cu, Pd and Ag surfaces. Experiments found a systematic rule to assign surface sites on (100) and (111) surfaces based on the main component of the electric-field gradient, a rule that does not work for (110) surfaces. Our calculations show that this particular rule is a manifestation of a more general underlying systematic behavior. When looked upon from this point of view, (100), …
Isolated oxygen impurities and fully oxidized structures of four stable two-dimensional (2D) SiS structures are investigated by {\em ab initio} density functional calculations. Binding energies of oxygen impurities for all the four 2D SiS structures are found larger than those for phosphorene, due to the lower electronegativity of Si atoms. The most stable configurations of isolated oxygen impurities for different 2D SiS structures are decided and the corresponding 2D structures with saturated oxidation (SiSO) are predicted. Among all the four fully oxidized structures, $α$-SiSO is demonstrate…
High-resolution photoemission spectroscopy and realistic ab-initio calculations have been employed to analyze the onset and progression of d-sp hybridization in Fe impurities deposited on alkali metal films. The interplay between delocalization, mediated by the free-electron environment, and Coulomb interaction among d-electrons gives rise to complex electronic configurations. The multiplet structure of a single Fe atom evolves and gradually dissolves into a quasiparticle peak near the Fermi level with increasing the host electron density. The effective multi-orbital impurity problem within th…
In this thesis we study electron transport through magnetic nanocontacts and nanowires with ab initio quantum transport calculations. The aim is to gain a thorough understanding of the interplay between electrical conduction and magnetism in atomic-size conductors and how it is affected by different aspects as e.g. the atomic structure and the chemical composition of the conductor. To this end our ab initio quantum transport program ALACANT which combines the non-equilibrium Green's function formalism (NEGF) with density functional theory (DFT) calculations has been extended to describe spin-p…
Nanowire (NW) arrays form spontaneously after high temperature annealing of a submonolayer deposition of Pt on a Ge(001) surface. These NWs are a single atom wide, with a length limited only by the underlying beta-terrace to which they are uniquely connected. Using ab-initio density functional theory (DFT) calculations we study possible geometries of the NWs and substrate. Direct comparison to experiment is made via calculated scanning tunneling microscope (STM) images. Based on these images, geometries for the beta-terrace and the NWs are identified, and a formation path for the nanowires as …
A mechanism of the high temperature ferromagnetism in polymerized fullerenes is suggested. It is assumed that some of the C$_{60}$ molecules in the crystal become magnetically active due to spin and charge transfer from the paramagnetic impurities (atoms or groups), such as hydrogen, fluorine, hydroxyl group OH, amino group NH$_2$, or methyl group CH$_3$, dispersed in the fullerene matrix. The exchange interaction between the spins localized on the magnetically active fullerenes is evaluated using \textit{ab initio} calculations. The nearest neighbour and next nearest neighbour exchange intera…
Semiconductor-superconductor heterostructures represent a promising platform for the detection of Majorana zero modes and subsequently the processing of quantum information using their exotic non-Abelian statistics. Theoretical modeling of such low-dimensional semiconductors is generally based on phenomenological effective models. However, a more microscopic understanding of their band structure and, especially, of the spin-orbit coupling of electrons in these devices is important for optimizing their parameters for applications in quantum computing. In this paper, we approach this problem by …
In a self-consistent semi-empirical numerical approach based on ab-initio-calculations for small samples, we evaluate the GMR effect for disordered (001)-(3--Fe/3--V)$_\infty$ multilayers by means of a Kubo formalism. We consider four different types of disorder arrangements: In case (i) and (ii), the disorder consists in the random interchange of some Fe and V atoms, respectively, at interface layers; in case (iii) in the formation of small groups of three substitutional Fe atoms in a V interface layer and a similar V group in a Fe layer at a different interface; and for case (iv) in the subs…
