A number of current theories of plasticity in amorphous solids assume at their basis that plastic deformations are spatially localized. We present in this paper a series of numerical experiments to test the degree of locality of plastic deformation. These experiments increase in terms of the stringency of the removal of elastic contributions to the observed elasto-plastic deformations. It is concluded that for all our simulational protocols the plastic deformations are not localized, and their scaling is sub-extensive. We offer a number of measures of the magnitude of the plastic deformation, all of which display sub-extensive scaling characterized by non-trivial exponents. We provide some evidence that the scaling exponents governing the sub-extensive scaling laws are non-universal, depending on the degree of disorder and on the parameters of the systems. Nevertheless understanding what determines these exponents should shed considerable light on the physics of amorphous solids.
Developing a macroscopic theory of elasto-plasticity in amorphous solids calls for (i) identifying the relevant macro state-variables and (ii) discriminating the different time-scales which characterize these variables. In current theories it is assumed that the stress reaches its elasto-plastic steady state value on the same time-scale as the configurational variables (be they the configurational energy, configurational entropy or the effective temperature). By examining numerical simulations in two and three dimensions we show that this is generally not the case, the configurational degrees …
An effective temperature $T_{\rm eff}$ which differs from the bath temperature is believed to play an essential role in the theory of elasto-plasticity of amorphous solids. The definition of a measurable $T_{\rm eff}$ in the literature on sheared solids suffers however from being connected to a fluctuation-dissipation theorem which is correct only in equilibrium. Here we introduce a natural definition of $T_{\rm eff}$ based on measurable structural features without recourse to any questionable assumption. The value of $T_{\rm eff}$ is connected, using theory and scaling concepts, to the flow s…
We compare the macroscopic and the local plastic behavior of a model amorphous solid based on two radically different numerical descriptions. On the one hand, we simulate glass samples by atomistic simulations. On the other, we implement a mesoscale elasto-plastic model based on a solid-mechanics description. The latter is extended to consider the anisotropy of the yield surface via statistically distributed local and discrete weak planes on which shear transformations can be activated. To make the comparison as quantitative as possible, we consider the simple case of a quasistatically driven …
The deformation and flow of disordered solids, such as metallic glasses and concentrated emulsions, involves swift localized rearrangements of particles that induce a long-range deformation field. To describe these heterogeneous processes, elastoplastic models handle the material as a collection of 'mesoscopic' blocks alternating between an elastic behavior and plastic relaxation, when they are too loaded. Plastic relaxation events redistribute stresses in the system in a very anisotropic way. We review not only the physical insight provided by these models into practical issues such as strain…
Upon loading, amorphous solids can exhibit brittle yielding, with the abrupt formation of macroscopic shear bands leading to fracture, or ductile yielding, with a multitude of plastic events leading to homogeneous flow. It has been recently proposed, and subsequently questioned, that the two regimes are separated by a sharp critical point, as a function of some control parameter characterizing the intrinsic disorder strength and the degree of stability of the solid. In order to resolve this issue, we have performed extensive numerical simulations of athermally driven elasto-plastic models with…
In the preceding paper, we developed an athermal shear-transformation-zone (STZ) theory of amorphous plasticity. Here we use this theory in an analysis of numerical simulations of plasticity in amorphous silicon by Demkowicz and Argon (DA). In addition to bulk mechanical properties, those authors observed internal features of their deforming system that challenge our theory in important ways. We propose a quasithermodynamic interpretation of their observations in which the effective disorder temperature, generated by mechanical deformation well below the glass temperature, governs the behavior…
We perform extensive simulations of a 2D LJ glass subjected to quasi-static shear deformation at T=0. We analyze the distribution of non-affine displacements in terms of contributions of plastic, irreversible events, and elastic, reversible motions. From this, we extract information about correlations between plastic events and about the elastic non-affine noise. Moreover, we find that non-affine motion is essentially diffusive, with a clearly size-dependent diffusion constant. These results, supplemented by close inspection of the evolving patterns of the non-affine tangent displacement field…
We develop an athermal shear-transformation-zone (STZ) theory of plastic deformation in spatially inhomogeneous, amorphous solids. Our ultimate goal is to describe the dynamics of the boundaries of voids or cracks in such systems when they are subjected to remote, time-dependent tractions. The theory is illustrated here for the case of a circular hole in an infinite two-dimensional plate, a highly symmetric situation that allows us to solve much of the problem analytically. In spite of its special symmetry, this example contains many general features of systems in which stress is concentrated …
Amorphous solids that underwent a strain in one direction such that they responded in a plastic manner `remember' that direction also when relaxed back to a state with zero mean stress. We address the question `what is the order parameter that is responsible for this memory?' and is therefore the reason for the different subsequent responses of the material to strains in different directions. We identify such an order parameter which is readily measurable, we discuss its trajectory along the stress-strain curve, and propose that it and its probability distribution function must form a necessar…
We address the system-size dependence of typical plastic flow events when an amorphous solid is put under a fixed external strain rate at a finite temperature. For system sizes that are accessible to numerical simulations at reasonable strain rates and at low temperatures the magnitude of plastic events grows with the system size. We explain however that this must be a finite size effect; for larger systems there exist two cross-over length-scales $ξ_1$ and $ξ_2$, the first determined by the elastic time-scale and the second by the thermal energy-scale. For system of linear size $L$ larger tha…
Elasto-plastic models are among the most successful ways to study the critical properties of the plastic yielding transition of amorphous solids. Typically these models are studied under a condition of constant transition rates from one plastic configuration to another, and in this form they predict the existence of well defined critical exponents that display universality, in the same sense that in standard equilibrium phase transitions. I show however that very naturally the transition rates must not be taken as a constant, but dependent of the local stress excess above the critical value. T…
We build a minimal, mean-field, model of plasticity of amorphous solids, based upon a phenomenology of dissipative events derived, in a preceding paper [A. Lemaitre, C. Caroli, arXiv:0705.0823] from extensive molecular simulations. It reduces to the dynamics of an ensemble of identical shear transformation zones interacting via the dynamic noise due to the long ranged elastic fields induced by zone flips themselves. We find that these ingredients are sufficient to generate flip avalanches with a power-law scaling with system size, analogous to that observed in molecular simulations. We further…
We develop an athermal version of the shear-transformation-zone (STZ) theory of amorphous plasticity in materials where thermal activation of irreversible molecular rearrangements is negligible or nonexistent. In many respects, this theory has broader applicability and yet is simpler than its thermal predecessors. For example, it needs no special effort to assure consistency with the laws of thermodynamics, and the interpretation of yielding as an exchange of dynamic stability between jammed and flowing states is clearer than before. The athermal theory presented here incorporates an explicit …
A minimal athermal model for the flow of dense disordered materials is proposed, based on two generic ingredients: local plastic events occuring above a microscopic yield stress, and the non-local elastic release of the stress these events induce in the material. A complex spatio-temporal rheological behaviour results, with features in line with recent experimental observations. At low shear rates, macroscopic flow actually originates from collective correlated bursts of plastic events, taking place in dynamically generated fragile zones. The related correlation length diverges algebraically a…
We address the cross effects between mechanical strains and magnetic fields on the plastic response of magnetoelastic amorphous solids. It is well known that plasticity in non-magnetic amorphous solids under external strain $γ$ is dominated by the co-dimension 1 saddle-node bifurcation in which an eigenvalue of the Hessian matrix vanishes at $γ_P$ like $\sqrt{γ_P-γ}$. This square-root singularity determines much of the statistical physics of elasto-plasticity, and in particular that of the stress-strain curves under athermal-quasistatic conditions. In this Letter we discuss the much richer phy…
We perform large scale simulations of a two dimensional lattice model for amorphous plasticity with random local yield stresses and long-range quadrupolar elastic interactions. We show that as the external stress increases towards the yielding phase transition, the scaling behavior of the avalanches crosses over from mean-field theory to a different universality class. This behavior is associated with strain localization, which significantly depends on the short-range properties of the interaction kernel.
The effect of finite temperature $T$ and finite strain rate $\dotγ$ on the statistical physics of plastic deformations in amorphous solids made of $N$ particles is investigated. We recognize three regimes of temperature where the statistics are qualitatively different. In the first regime the temperature is very low, $T<T_{\rm cross}(N)$, and the strain is quasi-static. In this regime the elasto-plastic steady state exhibits highly correlated plastic events whose statistics are characterized by anomalous exponents. In the second regime $T_{\rm cross}(N)<T<T_{\rm max}(\dotγ)$ the system-size de…
The yielding transition that occurs in amorphous solids under athermal quasistatic deformation has been the subject of many theoretical and computational studies. Here, we extend this analysis to include thermal effects at finite shear rate, focusing on how temperature alters avalanches. We derive a nonequilibrium phase diagram capturing how temperature and strain rate effects compete, when avalanches overlap, and whether finite-size effects dominate over temperature effects. The predictions are tested through simulations of an elastoplastic model in two dimensions and in a mean-field approxim…
We focus on the probability distribution function (pdf) $P(Δγ; γ)$ where $Δγ$ are the {\em measured} strain intervals between plastic events in an athermal strained amorphous solids, and $γ$ measures the accumulated strain. The tail of this distribution as $Δγ\to 0$ (in the thermodynamic limit) scales like $Δγ^η$. The exponent $η$ is related via scaling relations to the tail of the pdf of the eigenvalues of the {\em plastic modes} of the Hessian matrix $P(λ)$ which scales like $λ^θ$, $η=(θ-1)/2$. The numerical values of $η$ or $θ$ can be determined easily in the unstrained material and in the …
