We investigate the Casimir force between two dissimilar plane mirrors the material properties of which are described by Drude or Lorentz models. We calculate analytically the short and long distance asymptote of the force and relate its behavior to the influence of interacting surface plasmons. In particular we discuss conditions under which Casimir repulsion could be achieved.
The Casimir pressure is calculated between parallel metal plates, containing the materials Au, Cu, or Al. Our motivation for making this calculation is the need of comparing theoretical predictions, based on the Lifshitz formula, with experiments that are becoming gradually more accurate. In particular, the finite temperature correction is considered, in view of the recent discussion in the literature on this point. A special attention is given to the case where the difference between the Casimir pressures at two different temperatures, T=300 K and T=350 K, is involved. This seems to be a case…
We show the influence of surface plasmons on the Casimir effect between two plane parallel metallic mirrors at arbitrary distances. Using the plasma model to describe the optical response of the metal, we express the Casimir energy as a sum of contributions associated with evanescent surface plasmon modes and propagative cavity modes. In contrast to naive expectations, the plasmonic modes contribution is essential at all distances in order to ensure the correct result for the Casimir energy. One of the two plasmonic modes gives rise to a repulsive contribution, balancing out the attractive con…
In this paper we study the role of surface plasmon modes in the Casimir effect. The Casimir energy can be written as a sum over the modes of a real cavity and one may identify two sorts of modes, two evanescent surface plasmon modes and propagative modes. As one of the surface plasmon modes becomes propagative for some choice of parameters we adopt an adiabatic mode definition where we follow this mode into the propagative sector and count it together with the surface plasmon contribution, calling this contribution "plasmonic". We evaluate analytically the contribution of the plasmonic modes t…
The first precise measurement of the Casimir force between dissimilar metals is reported. The attractive force, between a Cu layer evaporated on a microelectromechanical torsional oscillator, and an Au layer deposited on an Al$_2$O$_3$ sphere, was measured dynamically with a noise level of 6 fN/$\sqrt{\rm{Hz}}$. Measurements were performed for separations in the 0.2-2 $μ$m range. The results agree to better than 1% in the 0.2-0.5 $μ$m range with a theoretical model that takes into account the finite conductivity and roughness of the two metals. The observed discrepancies, which are much larger…
In this paper we study the role of surface plasmon modes in the Casimir effect. First we write the Casimir energy as a sum over the modes of a real cavity. We may identify two sorts of modes, two evanescent surface plasmon modes and propagative modes. As one of the surface plasmon modes becomes propagative for some choice of parameters we adopt an adiabatic mode definition where we follow this mode into the propagative sector and count it together with the surface plasmon contribution, calling this contribution "plasmonic". The remaining modes are propagative cavity modes, which we call "photo…
We calculate exactly the Casimir force between a spherical particle and a plane, both with arbitrary dielectric properties, in the non-retarded limit. Using a Spectral Representation formalism, we show that the Casimir force of a sphere made of a material A and a plane made of a material B, differ from the case when the sphere is made of B, and the plane is made of A. The differences in energy and force show the importance of the geometry, and make evident the necessity of realistic descriptions of the sphere-plane system beyond the Proximity Theorem approximation.
A new model for calculating the Casimir-Lifshitz force per unit length for two dielectric rods is proposed, based on the Green function method of classical electrodynamics and the Lorentz model for permittivity.
We investigate how the combination of nonequilibrium effects and material properties impacts on the Casimir-Polder interaction between an atom and a surface. By addressing systems with temperature inhomogeneities and laser interactions, we show that nonmonotonous energetic landscapes can be produced where barriers and minima appear. Our treatment provides a self-consistent quantum theoretical framework for investigating the properties of a class of nonequilibrium atom-surface interactions.
We investigate the role of surface plasmons in the electromagnetic Casimir effect at finite temperature, including situations out of global thermal equilibrium. The free energy is calculated analytically and expanded for different regimes of distances and temperatures. Similar to the zero-temperature case, the interaction changes from attraction to repulsion with distance. Thermal effects are shown to be negligible for small plate separations and at room temperature, but become dominant and repulsive at large values of these parameters. In configurations out of global thermal equilibrium, we s…
We present experiments in which the interaction of a single gold nanoparticle with glass substrates or with another gold particle can be tuned by in-situ control of their separations using scanning probe technology. We record the plasmon resonances of the coupled systems as a function of the polarization of the incident field and the particle position. The distinct spectral changes of the scattered light from the particle pair are in good agreement with the outcome of finite difference time-domain (FDTD) calculations. We believe our experimental technique holds promise for the investigation of…
We investigate the time-dependent Casimir-Polder potential of a polarizable two-level atom placed near a surface of arbitrary material, after a sudden change in the parameters of the system. Different initial conditions are taken into account. For an initially bare ground-state atom, the time-dependent Casimir-Polder energy reveals how the atom is "being dressed" by virtual, matter-assisted photons. We also study the transient behavior of the Casimir-Polder interaction between the atom and the surface starting from a partially dressed state, after an externally induced change in the atomic lev…
The Casimir and van der Waals interaction between two dissimilar thick dielectric plates is reconsidered on the basis of thermal quantum field theory in Matsubara formulation. We briefly review two main derivations of the Lifshitz formula in the framework of thermal quantum field theory without use of the fluctuation-dissipation theorem. A set of special conditions is formulated under which these derivations remain valid in the presence of dissipation. The low-temperature behavior of the Casimir and van der Waals interactions between dissimilar dielectrics is found analytically from the Lifshi…
We investigate the influence of a dark photon on the Casimir effect and calculate the corresponding leading contribution to the Casimir energy. For expected magnitudes of the photon - dark photon mixing parameter, the influence turns out to be negligible. The plasmon dispersion relation is also not noticeably modified by the presence of a dark photon.
The measurement of the Casimir force between a large gold coated sphere and single crystal silicon plate is performed with an atomic force microscope. A rigorous statistical comparison of data with theory is done, without use of the concept of root-mean-square deviation, and excellent agreement is obtained. The Casimir force between metal and semiconductor is demonstrated to be significantly different than between two similar or dissimilar metals.
In this paper we review the role of magneto plasmon polaritons in the Casimir force calculations. By applying an external constant magnetic field a strong optical anisotropy is induced on two parallel slabs reducing the reflectivity and thus the Casimir force. As the external magnetic field increases, the Casimir force decreases. Thus, with an an external magnetic field the Casimir force can be controlled.The calculations are done in the Voigt configuration where the magnetic field is parallel to the slabs. In this configuration the reflection coefficients for TE and TM modes do not show mode …
We analyze some consequences of the Casimir-type zero-point radiation pressure. These include macroscopic "vacuum" forces on a metallic layer in-between a dielectric medium and an inert ($ε(ω) = 1$) one. Ways to control the sign of these forces, based on dielectric properties of the media, are thus suggested. Finally, the large positive Casimir pressure, due to surface plasmons on thin metallic layers, is evaluated and discussed.
We take a closer look at the fundamental Casimir-Polder interaction between quantum particles and dispersive dielectric surfaces with surface polariton or plasmon resonances. Linear response theory shows that in the near field, van der Waals, regime the free energy shift of a particle contains a thermal component that depends exclusively on the population/excitation of the evanescent surface polariton/plasmon modes. Our work makes evident the link between particle surface interaction and near field thermal emission and demonstrates how this can be used to engineer Casimir-Polder forces. We als…
We present a theoretical calculation of the pull-in control in capacitive micro switches actuated by Casimir forces, using external magnetic fields. The external magnetic fields induces an optical anisotropy due to the excitation of magneto plasmons, that reduces the Casimir force. The calculations are performed in the Voigt configuration, and the results show that as the magnetic field increases the system becomes more stable. The detachment length for a cantilever is also calculated for a cantilever, showing that it increases with increasing magnetic field. At the pull-in separation, the sti…
Electromagnetic vacuum fluctuations have observable consequences, like the Casimir force between mirrors in vacuum. This force is now measured with good accuracy and agreement with theory when the effect of imperfect reflection of mirrors is properly taken into account. We discuss the simple case of bulk metallic mirrors described by a plasma model and show that simple scaling laws are obtained at the limits of long and short distances. The crossover between the short and long-distance laws is quite similar to the crossover between Van der Waals and Casimir-Polder forces for two atoms in vacuu…
We derive perturbation analytic expressions for the Casimir free energy and entropy between two dissimilar ferromagnetic plates which are applicale at arbitrarily low temperature. The dielectric properties of metals are described using either the nondissipative plasma model or the Drude model taking into account the dissipation of free charge carriers. Both cases of constant and frequency-dependent magnetic permeability are considered. It is shown that for ferromagnetic metals described by the plasma model the Casimir entropy goes to zero when the temperature vanishes, i.e., the Nernst heat th…
Polarisable atoms and molecules experience the Casimir-Polder force near magnetoelectric bodies, a force that is induced by quantum fluctuations of the electromagnetic field and the matter. Atoms and molecules in relative motion to a magnetoelectric surface experience an additional, velocity-dependent force. We present a full quantum-mechanical treatment of this force and identify a generalised Doppler effect, the time delay between photon emission and reabsorption, and the Roentgen interaction as its three sources. For ground-state atoms, the force is very small and always decelerating, hence…
We study the Casimir pressure between two similar plates of finite thickness kept at different temperatures in the case when the dielectric permittivity of the plates depends on temperature. It is suggested to consider the dielectric permittivity at two different temperatures as the permittivities of two dissimilar bodies, thus allowing to apply the theory of Casimir forces out of thermal equilibrium developed earlier in the literature. Following this approach, we show that, in addition to the equilibrium contribution to the nonequilibrium Casimir pressure, a proper nonequilibrium contribution…
We demonstrate the fundamental links existing between two different descriptions of quantum electrodynamics in inhomogeneous, lossy and dispersive dielectric media which are based either on the Huttner-Barnett formalism for polaritons [B. Huttner and S. M. Barnett, Phys.Rev. A 46, 4306 (1992)] or the Langevin noise approach using fluctuating currents [T. Gruner and D.-G. Welsch, Phys.Rev.A 53, 1818 (1996)]. In this work we demonstrate the practical equivalence of the two descriptions by introducing the concept of effective photon state associated with some specific noise current distribution. …
We report new constraints on extra-dimensional models and other physics beyond the Standard Model based on measurements of the Casimir force between two dissimilar metals for separations in the range 0.2--1.2 $μ$m. The Casimir force between an Au-coated sphere and a Cu-coated plate of a microelectromechanical torsional oscillator was measured statically with an absolute error of 0.3 pN. In addition, the Casimir pressure between two parallel plates was determined dynamically with an absolute error of $\approx 0.6$ mPa. Within the limits of experimental and theoretical errors, the results are in…
The impact of agglomeration of magnetic nanoparticles on the Casimir pressure is investigated in the configuration of two material plates and a layer of ferrofluid confined between them. Both cases of similar and dissimilar plates are considered in the framework of the Lifshitz theory of dispersion forces. It is shown that for two dielectric (SiO_2) plates, as well as for one dielectric (SiO_2) and another one metallic (Au) plates, an agglomeration of magnetite nanoparticles results in only quantitative differences in the values of the Casimir pressure if the optical data for Au are extrapolat…
We show that an isotropic dipolar particle in the vicinity of a substrate made of nonreciprocal plasmonic materials can experience a lateral Casimir force and torque when the particle's temperature differs from that of the slab and the environment. We connect the existence of the lateral force to the asymmetric dispersion of nonreciprocal surface polaritons and the existence of the lateral torque to the spin-momentum locking of such surface waves. Using the formalism of fluctuational electrodynamics, we show that the features of lateral force and torque should be experimentally observable usin…
The surface impedance approach is discussed in connection with the precise calculation of the Casimir force between metallic plates. It allows to take into account the nonlocal connection between the current density and electric field inside of metals. In general, a material has to be described by two impedances $Z_{s}(ω,q)$ and $Z_{p}(ω,q)$ corresponding to two different polarization states. In contrast with the approximate Leontovich impedance they depend not only on frequency $ω$ but also on the wave vector along the plate $q$. In this paper only the nonlocal effects happening at frequencie…
We separate Maxwell's equations for background media that allow for both electric and magnetic time-dependence in a generalized Lorenz gauge. In a process analogous to the dynamical Casimir effect (DCE) we discuss how surface plasmon polaritons (SPP)s can be created out of vacuum, via the time-dependent variation of a dielectric and magnetic insulator at a metal interface for TM and TE branches, respectively. We suggest how to extend currently proposed DCE experiments to set up and detect these excitations. Numerical simulations (without any approximation) indicate that vacuum excited SPPs can…
We compare theory and experiment in the Casimir force measurement between gold surfaces performed with the atomic force microscope. Both random and systematic experimental errors are found leading to a total absolute error equal to 8.5 pN at 95% confidence. In terms of the relative errors, experimental precision of 1.75% is obtained at the shortest separation of 62 nm at 95% confidence level (at 60% confidence the experimental precision of 1% is confirmed at the shortest separation). An independent determination of the accuracy of the theoretical calculations of the Casimir force and its appli…
We theoretically study the Casimir-Polder force on an atom in a arbitrary initial state in a rather general electromagnetic environment wherein the materials may have a nonreciprocal bianisotropic dispersive response. It is shown that under the Markov approximation the force has resonant and nonresonant contributions. We obtain explicit expressions for the optical force both in terms of the system Green function and of the electromagnetic modes. We apply the theory to the particular case wherein a two-level system interacts with a topological gyrotropic material, showing that the nonreciprocit…
