Scalable quantum computation in realistic devices requires that precise control can be implemented efficiently in the presence of decoherence and operational errors. We propose a general constructive procedure for designing robust unitary gates on an open quantum system without encoding or measurement overhead. Our results allow for a low-level error correction strategy solely based on Hamiltonian engineering using realistic bounded-strength controls and may substantially reduce implementation requirements for fault-tolerant quantum computing architectures.
We address the problem of constructing dynamically corrected gates for non-Markovian open quantum systems in settings where limitations on the available control inputs and/or the presence of control noise make existing analytical approaches unfeasible. By focusing on the important case of singlet-triplet electron spin qubits, we show how ideas from optimal control theory may be used to automate the synthesis of dynamically corrected gates that simultaneously minimize the system's sensitivity against both decoherence and control errors. Explicit sequences for effecting robust single-qubit rotat…
Quantum information technologies demand highly accurate control over quantum systems. Achieving this requires control techniques that perform well despite the presence of decohering noise and other adverse effects. Here, we review a general technique for designing control fields that dynamically correct errors while performing operations using a close relationship between quantum evolution and geometric space curves. This approach provides access to the global solution space of control fields that accomplish a given task, facilitating the design of experimentally feasible gate operations for a…
Precise control of an open quantum system is critical to quantum information processing, but is challenging due to inevitable interactions between the quantum system and the environment. We demonstrated experimentally at room temperature a type of dynamically corrected gates on the nitrogen-vacancy centers in diamond. The infidelity of quantum gates caused by environment nuclear spin bath is reduced from being the second-order to the sixth-order of the noise to control field ratio, which offers greater efficiency in reducing the infidelity by reducing the noise level. The decay time of the coh…
The ability to perform gates in multiqubit systems that are robust to noise is of crucial importance for the advancement of quantum information technologies. However, finding control pulses that cancel noise while performing a gate is made difficult by the intractability of the time-dependent Schrodinger equation, especially in multiqubit systems. Here, we show that this issue can be sidestepped by using a formalism in which the cumulative error during a gate is represented geometrically as a curve in a multi-dimensional Euclidean space. Cancellation of noise errors to leading order correspond…
We study theoretically the responses of the dynamically corrected gates to time-dependent noises in the exchange-only spin qubit system. We consider $1/f$ noises having spectra proportional to $1/ω^α$, where the exponent $α$ indicates the strength of correlation within the noise. The quantum gate errors due to noises are extracted from a numerical simulation of Randomized Benchmarking, and are compared between the application of uncorrected operations and that of dynamically corrected gates robust against the hyperfine noise. We have found that for $α\gtrsim1.5$, the dynamically corrected gate…
Quantum error correction provides a path to large-scale quantum computers, but is built on challenging assumptions about the characteristics of the underlying errors. In particular, the mathematical assumption of statistically independent errors in quantum logic operations is at odds with realistic environments where error sources may exhibit strong temporal and spatial correlations. We present experiments using trapped ions to demonstrate that the use of dynamically corrected gates (DCGs), generally considered for the reduction of error magnitudes, can also suppress error correlations in spac…
The key for realizing fault-tolerant quantum computation lies in maintaining the coherence of all qubits so that high-fidelity and robust quantum manipulations on them can be achieved. One of the promising approaches is to use geometric phases in the construction of universal quantum gates, due to their intrinsic robustness against certain types of local noises. However, due to limitations in previous implementations, the noise-resilience feature of nonadiabatic holonomic quantum computation (NHQC) still needs to be improved. Here, combining with the dynamical correction technique, we propose …
We derive a set of composite pulse sequences that generates CNOT gates and correct all systematic errors within the logical subspace to arbitrary order. These sequences are applicable for any two-qubit interaction Hamiltonian, and make no assumptions about the underlying noise mechanism except that it is constant on the timescale of the operation. We do assume access to error-free single-qubit gates, so single-qubit gate imperfections eventually limit the achievable fidelity. However, since single-qubit gates generally have much higher fidelities than two-qubit gates in practice, these pulse s…
We theoretically consider a cross-resonance (CR) gate implemented by pulse sequences proposed by Calderon-Vargas & Kestner, Phys. Rev. Lett. 118, 150502 (2017). These sequences mitigate systematic error to first order, but their effectiveness is limited by one-qubit gate imperfections. Using additional microwave control pulses, it is possible to tune the effective CR Hamiltonian into a regime where these sequences operate optimally. This improves the overall feasibility of these sequences by reducing the one-qubit operations required for error correction. We illustrate this by simulating rando…
We provide analytical composite pulse sequences that perform dynamical decoupling concurrently with arbitrary rotations for a qubit coded in the spin state of a triple quantum dot. The sequences are designed to respect realistic experimental constraints such as strictly nonnegative couplings. Logical errors and leakage errors are simultaneously corrected. A short pulse sequence is presented to compensate nuclear noise and a longer sequence is presented to simultaneously compensate nuclear and charge noise. The capability developed in this work provides a clear prescription for combatting the r…
We propose an architecture for a high-fidelity deterministic controlled-phase gate between two photonic qubits using bulk optical nonlinearities in near-term feasible photonic integrated circuits. The gate is enabled by converting travelling continuous-mode photons into stationary cavity modes using strong classical control fields that dynamically change the cavity-waveguide coupling rate. This process limits the fidelity degrading noise pointed out by Shapiro [J. Shapiro, Phys. Rev. A, 73, 2006] and Gea-Banacloche [J. Gea-Banacloche, Phys. Rev. A, 81, 2010]. We show that high-fidelity gates c…
Fault-tolerant, error-corrected quantum computation is commonly acknowledged to be crucial to the realisation of large-scale quantum algorithms that could lead to extremely impactful scientific or commercial results. Achieving a universal set of quantum gate operations in a fault-tolerant error-corrected framework suffers from a `conservation of unpleasantness'. In general, no matter what error correction technique is employed, there is always one element of a universal gate set that carries a significant resource overhead - either in physical qubits, computational time, or both. Specifically,…
We construct a universal set of high fidelity quantum gates to be used on a sparse bipartite lattice with always-on Ising couplings. The gates are based on dynamical decoupling sequences using shaped pulses, they protect against low-frequency phase noise, and can be run in parallel on non-neighboring qubits. This makes them suitable for implementing quantum error correction with low-density parity check codes like the surface codes and their finite-rate generalizations. We illustrate the construction by simulating quantum Zeno effect with the $[[4,2,2]]$ toric code on a spin chain.
We describe how a universal set of dynamically-corrected quantum gates can be implemented using sequences of shaped decoupling pulses on any qubit network forming a sparse bipartite graph with always-on Ising interactions. These interactions are constantly decoupled except when they are needed for two-qubit gates. We analytically study the error operators associated with the constructed gates up to third order in the Magnus expansion, analyze these errors numerically in the unitary time evolution of small qubit clusters, and give a bound on high-order errors for qubits on a large square lattic…
To solve classically hard problems, quantum computers need to be resilient to the influence of noise and decoherence. In such a fault-tolerant quantum computer, noise-induced errors must be detected and corrected in real-time to prevent them from propagating between components. This requirement is especially pertinent while applying quantum gates, when the interaction between components can cause errors to quickly spread throughout the system. However, the large overhead involved in most fault-tolerant architectures makes implementing these systems a daunting task, which motivates the search f…
Implementing high-fidelity quantum control and reducing the effect of the coupling between a quantum system and its environment is a major challenge in developing quantum information technologies. Here, we show that there exists a geometrical structure hidden within the time-dependent Schrödinger equation that provides a simple way to view the entire solution space of pulses that suppress noise errors in a system's evolution. In this framework, any single-qubit gate that is robust against quasistatic noise to first order corresponds to a closed three-dimensional space curve, where the driving …
Dynamically correcting for unwanted interactions between a quantum system and its environment is vital to achieving the high-fidelity quantum control necessary for a broad range of quantum information technologies. In recent work, we uncovered the complete solution space of all possible driving fields that suppress transverse quasistatic noise errors while performing single-qubit operations. This solution space lives within a simple geometrical framework that makes it possible to obtain globally optimal pulses subject to a set of experimental constraints by solving certain geometrical optimiza…
Usually, the hyperparallel quantum computation can speed up quantum computing, reduce the quantum resource consumed largely, resist to noise, and simplify the storage of quantum information. Here, we present the first scheme for the self-error-corrected hyperparallel photonic quantum computation working with both the polarization and the spatial-mode degrees of freedom of photon systems simultaneously. It can prevent bit-flip errors from happening with an imperfect nonlinear interaction in the nearly realistic condition. We give the way to design the universal hyperparallel photonic quantum co…
Topological quantum computing has recently proven itself to be a very powerful model when considering large- scale, fully error corrected quantum architectures. In addition to its robust nature under hardware errors, it is a software driven method of error corrected computation, with the hardware responsible for only creating a generic quantum resource (the topological lattice). Computation in this scheme is achieved by the geometric manipulation of holes (defects) within the lattice. Interactions between logical qubits (quantum gate operations) are implemented by using particular arrangements…
We model repetitive quantum error correction (QEC) with the single-error-correcting five-qubit code on a network of individually-controlled qubits with always-on Ising couplings, using our previously designed universal set of quantum gates based on sequences of shaped decoupling pulses. In addition to serving as accurate quantum gates, the sequences also provide dynamical decoupling (DD) of low-frequency phase noise. The simulation involves integrating unitary dynamics of six qubits over the duration of tens of thousands of control pulses, using classical stochastic phase noise as a source of …
Based on numerically-optimized real-device gates and parameters we study the performance of the phase-flip (repetition) code on a linear array of Gallium Arsenide (GaAs) quantum dots hosting singlet-triplet qubits. We first examine the expected performance of the code using simple error models of circuit-level and phenomenological noise, reporting, for example, a circuit-level depolarizing noise threshold of approximately 3%. We then perform density-matrix simulations using a maximum-likelihood and minimum-weight matching decoder to study the effect of real-device dephasing, read-out error, qu…
Controllable interaction between superconducting qubits is desirable for large-scale quantum computation and simulation. Here, based on a theoretical proposal by Yan et al. [Phys. Rev. Appl. 10, 054061 (2018)] we experimentally demonstrate a simply-designed and flux-controlled tunable coupler with a continuous tunability by adjusting the coupler frequency, which can completely turn off adjacent superconducting qubit coupling. Utilizing the tunable interaction between two qubits via the coupler, we implement a different type of controlled-phase (CZ) gate with 'dynamically decoupled regime', whi…
We present an n-bit Toffoli gate quantum circuit based on the realization proposed by Barenco, where some of the Toffoli gates in their construction are replaced with Peres gates. This results in a significant cost reduction. Our main contribution is a quantum circuit which simulates the (m+1)-bit Toffoli gate with 32m-96 elementary quantum gates and one garbage bit which is passed unchanged. This paper is a corrected and expanded version of our recent journal publication.
We summarize our results on decoherence for short- to intermediate-time dynamics of an externally controlled two-state quantum system - a qubit - interacting with thermal bosonic environment. The developed approximation schemes are illustrated for an adiabatic model with time-dependent gate control, and for a model with rotating-wave gate function.
Topologically quantum error corrected logical gates are complex. Chains of errors can form in space and time and diagonally in spacetime. It is highly nontrivial to determine whether a given logical gate is free of low weight combinations of errors leading to failure. We report a new tool Nestcheck capable of analyzing an arbitrary topological computation and determining the minimum number of errors required to cause failure.
Dynamically corrected gates were recently introduced [Khodjasteh and Viola, Phys. Rev. Lett. 102, 080501 (2009)] as a tool to achieve decoherence-protected quantum gates based on open-loop Hamiltonian engineering. Here, we further expand the framework of dynamical quantum error correction, with emphasis on elucidating under what conditions decoherence suppression can be ensured while performing a generic target quantum gate, using only available bounded-strength control resources. Explicit constructions for physically relevant error models are detailed, including arbitrary linear decoherence a…
Geometric quantum gates are performed by using the geometric phase, making them particularly robust to the pulse amplitude error due to the intrinsic global property. However, in many systems, such as the silicon-based spin qubits, the off-resonance error is the dominant noise, which can cause dephasing and is always difficult to deal with for a geometric gate. Thus how to deal with the off-resonance error is very significant for the application of the geometric gates. A recent work in \emph{Phy. Rev. Appl. 16, 044005 (2021)} reveals that by inserting two $π$-pulse dynamically corrected sequen…
We propose a selective dynamical decoupling scheme on a chain of permanently coupled qubits with XX type interactions, which is capable of dynamically suppressing any coupling in the chain by applying sequences of local pulses to the individual qubits. We demonstrate that high-fidelity single- and two-qubit gates can be achieved by this procedure and that sequences of gates can be implemented by this pulse control alone. We discuss the applicability and physical limitations of our model specifically for strongly coupled superconducting flux qubits. Since dynamically modifying the couplings bet…
In addition to magnetic field and electric charge noise adversely affecting spin qubit operations, performing single-qubit gates on one of multiple coupled singlet-triplet qubits presents a new challenge---crosstalk, which is inevitable (and must be minimized) in any multiqubit quantum computing architecture. We develop a set of dynamically-corrected pulse sequences that are designed to cancel the effects of both types of noise (i.e., field and charge) as well as crosstalk to leading order, and provide parameters for these corrected sequences for all 24 of the single-qubit Clifford gates. We t…
The implementation of logical operations on polarization-encoded x-rays via resonant light-nucleus interactions is theoretically investigated. We show that by means of resonant scattering off nuclei and fast rotations of the nuclear hyperfine magnetic field to control the polarization of the output photon, single-qubit logical gates can be simulated. A second control qubit may be employed to trigger the magnetic field rotation, thus allowing several implementation choices for a controlled NOT gate for x-ray photons.
We present a quantum circuit representation consisting entirely of qubit initialisations (I), a network of controlled-NOT gates (C) and measurements with respect to different bases (M). The ICM representation is useful for optimisation of quantum circuits that include teleportation, which is required for fault-tolerant, error corrected quantum computation. The non-deterministic nature of teleportation necessitates the conditional introduction of corrective quantum gates and additional ancillae during circuit execution. Therefore, the standard optimisation objectives, gate count and number of w…
Here we describe a simple mechanical procedure for compiling a quantum gate network into the natural gates (pulses and delays) for an Ising quantum computer. The aim is not necessarily to generate the most efficient pulse sequence, but rather to develop an efficient compilation algorithm that can be easily implemented in large spin systems. The key observation is that it is not always necessary to refocus all the undesired couplings in a spin system. Instead the coupling evolution can simply be tracked and then corrected at some later time. Although described within the language of NMR the alg…
The stabilizing properties of one-error correcting jump codes are explored under realistic non-ideal conditions. For this purpose the quantum algorithm of the tent-map is decomposed into a universal set of Hamiltonian quantum gates which ensure perfect correction of spontaneous decay processes under ideal circumstances even if they occur during a gate operation. An entanglement gate is presented which is capable of entangling any two logical qubits of different one-error correcting code spaces. With the help of this gate simultaneous spontaneous decay processes affecting physical qubits of dif…
We present a scheme for correcting for crosstalk- and noise-induced errors in exchange-coupled singlet-triplet semiconductor double quantum dot qubits. While exchange coupling allows the coupling strength to be controlled independently of the intraqubit exchange couplings, there is also the problem of leakage, which must be addressed. We show that, if a large magnetic field difference is present between the two qubits, leakage is suppressed. We then develop pulse sequences that correct for crosstalk- and noise-induced errors and present parameters describing them for the 24 Clifford gates. We …
We develop a systematic method of performing corrected gate operations on an array of exchange-coupled singlet-triplet qubits in the presence of both fluctuating nuclear Overhauser field gradients and charge noise. The single-qubit control sequences we present have a simple form, are relatively short, and form the building blocks of a corrected CNOT gate when also implemented on the inter-qubit exchange link. This is a key step towards enabling large-scale quantum computation in a semiconductor-based architecture by facilitating error reduction below the quantum error correction threshold for …
Inevitable interactions with the reservoir largely degrade the performance of non-local gates, which hinders practical quantum computation from coming into existence. Here we experimentally demonstrate a 99.920(7)\%-fidelity controlled-NOT gate by suppressing the complicated noise in a solid-state spin system at room temperature. We found that the fidelity limited at 99\% in previous works results from only considering static noise, and thus, in this work, time-dependent noise and quantum noise are also included. All noises are dynamically corrected by an exquisitely designed shaped pulse, giv…
Quantum error correction is an essential component for practical quantum computing on noisy quantum hardware. However, logical operations on error-corrected qubits require a significant resource overhead, especially for high-precision and high-fidelity non-Clifford rotation gates. To address this issue, we propose a postselection-based algorithm to efficiently prepare resource states for gate teleportation. Our algorithm achieves fault tolerance, demonstrating the exponential suppression of logical errors with code distance, and it applies to any stabilizer codes. We provide analytical derivat…
