This paper deals with the kinematic and dynamic analyses of the Orthoglide 5-axis, a five-degree-of-freedom manipulator. It is derived from two manipulators: i) the Orthoglide 3-axis; a three dof translational manipulator and ii) the Agile eye; a parallel spherical wrist. First, the kinematic and dynamic models of the Orthoglide 5-axis are developed. The geometric and inertial parameters of the manipulator are determined by means of a CAD software. Then, the required motors performances are evaluated for some test trajectories. Finally, the motors are selected in the catalogue from the previous results.
Institut de Recherche en Communication et Cybernétique de Nantes（南特通信与控制研究所）
This paper describes a new parallel kinematic architecture for machining applications: the orthoglide. This machine features three fixed parallel linear joints which are mounted orthogonally and a mobile platform which moves in the Cartesian x-y-z space with fixed orientation. The main interest of the orthoglide is that it takes benefit from the advantages of the popular PPP serial machines (regular Cartesian workspace shape and uniform performances) as well as from the parallel kinematic arrangement of the links (less inertia and better dynamic performances), which makes the orthoglide well s…
Belarusian State University of Informatics and Radioelectronics（白俄罗斯国立信息与无线电电子大学）；Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制研究所）
The paper addresses kinematic and geometrical aspects of the Orthoglide, a three-DOF parallel mechanism. This machine consists of three fixed linear joints, which are mounted orthogonally, three identical legs and a mobile platform, which moves in the Cartesian x-y-z space with fixed orientation. New solutions to solve inverse/direct kinematics are proposed and a detailed workspace analysis is performed taking into account specific joint limit constraints.
Belarusian State University of Informatics and Radioelectronics（白俄罗斯信息与无线电电子大学）；Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制研究所）
The paper addresses kinematic and geometrical aspects of the Orthoglide, a three-DOF parallel mechanism. This machine consists of three fixed linear joints, which are mounted orthogonally, three identical legs and a mobile platform, which moves in the Cartesian x-y-z space with fixed orientation. New solutions to solve inverse/direct kinematics are proposed and we perform a detailed workspace and singularity analysis, taking into account specific joint limit constraints.
Institut de Recherche en Communications et Cybernétique de Nantes (IRCCyN)（南特通信与控制研究所（IRCCyN））
The orthoglide is a 3-DOF parallel mechanism designed at IRCCyN for machining applications. It features three fixed parallel linear joints which are mounted orthogonally and a mobile platform which moves in the Cartesian x-y-z space with fixed orientation. The orthoglide has been designed as function of a prescribed Cartesian workspace with prescribed kinetostatic performances. The interesting features of the orthoglide are a regular Cartesian workspace shape, uniform performances in all directions and good compactness. A small-scale prototype of the orthoglide under development is presented a…
Belarusian State University of Informatics and Radioelectronics（白俄罗斯信息与无线电电子大学）；Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制研究所）；CNRS（法国国家科学研究中心）
The Orthoglide is a Delta-type PKM dedicated to 3-axis rapid machining applications that was originally developed at IRCCyN in 2000-2001 to meet the advantages of both serial 3-axis machines (regular workspace and homogeneous performances) and parallel kinematic architectures (good dynamic performances and stiffness). This machine has three fixed parallel linear joints that are mounted orthogonally. The geometric parameters of the Orthoglide were defined as function of the size of a prescribed cubic Cartesian workspace that is free of singularities and internal collision. The interesting featu…
Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制论研究所）
The subject of this paper is about the kinematic analysis and the trajectory planning of the Orthoglide 5-axis. The Orthoglide 5-axis a five degrees of freedom parallel kinematic machine developed at IRCCyN and is made up of a hybrid architecture, namely, a three degrees of freedom translational parallel manip-ulator mounted in series with a two degrees of freedom parallel spherical wrist. The simpler the kinematic modeling of the Or-thoglide 5-axis, the higher the maximum frequency of its control loop. Indeed, the control loop of a parallel kinematic machine should be computed with a high fre…
Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制研究所）
This paper deals with the optimal path placement for a manipulator based on energy consumption. It proposes a methodology to determine the optimal location of a given test path within the workspace of a manipulator with minimal electric energy used by the actuators while taking into account the geometric, kinematic and dynamic constraints. The proposed methodology is applied to the Orthoglide~3-axis, a three-degree-of-freedom translational parallel kinematic machine (PKM), as an illustrative example.
Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制研究所）；Ecole Centrale de Nantes（南特中央理工学院）；Ecole des Mines de Nantes（南特矿业学院）；Université de Nantes（南特大学）
The Orthoglide project aims at designing a new 3-axis machine tool for High Speed Machining. Basis kinematics is a 3 degree-of-freedom translational parallel mechanism. This basis was submitted to isotropic and manipulability constraints that allowed the optmization of its kinematic architecture and legs architecture. Thus, several leg morphologies are convenient for the chosen mechanism. We explain the process that led us to the choice we made for the Orthoglide. A static study is presented to show how singular configurations of the legs can cause stiffness problems.
Belarusian State University of Informatics and Radioelectronics（白俄罗斯国立信息与无线电电子大学）；Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制研究所）
The paper proposes a novel approach for the geometrical model calibration of quasi-isotropic parallel kinematic mechanisms of the Orthoglide family. It is based on the observations of the manipulator leg parallelism during motions between the specific test postures and employs a low-cost measuring system composed of standard comparator indicators attached to the universal magnetic stands. They are sequentially used for measuring the deviation of the relevant leg location while the manipulator moves the TCP along the Cartesian axes. Using the measured differences, the developed algorithm estima…
Belarusian State University of Informatics and Radioelectronics（白俄罗斯国立信息与无线电电子大学）；Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制研究所）
The paper proposes a novel calibration approach for the Orthoglide-type mechanisms based on observations of the manipulator leg parallelism during motions between the prespecified test postures. It employs a low-cost measuring system composed of standard comparator indicators attached to the universal magnetic stands. They are sequentially used for measuring the deviation of the relevant leg location while the manipulator moves the TCP along the Cartesian axes. Using the measured differences, the developed algorithm estimates the joint offsets that are treated as the most essential parameters …
Belarusian State University of Informatics and Radioelectronics（白俄罗斯信息与无线电电子大学）；Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制研究所）
The paper proposes a novel calibration approach for the Orthoglide-type mechanisms based on observations of the manipulator leg parallelism during mo-tions between the prespecified test postures. It employs a low-cost measuring system composed of standard comparator indicators attached to the universal magnetic stands. They are sequentially used for measuring the deviation of the relevant leg location while the manipulator moves the TCP along the Cartesian axes. Using the measured differences, the developed algorithm estimates the joint offsets that are treated as the most essential parameters…
Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制论研究所）；École Centrale de Nantes（南特中央理工学院）；Université de Nantes（南特大学）；École des Mines de Nantes（南特矿业学院）
This paper presents a sensitivity analysis of the Orthoglide, a 3-DOF translational Parallel Kinematic Machine. Two complementary methods are developed to analyze its sensitivity to its dimensional and angular variations. First, a linkage kinematic analysis method is used to have a rough idea of the influence of the dimensional variations on the location of the end-effector. Besides, this method shows that variations in the design parameters of the same type from one leg to the other have the same influence on the end-effector. However, this method does not take into account the variations in …
École des Mines de Nantes（南特矿业学院）；Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制研究所）
The paper proposes a new calibration method for parallel manipulators that allows efficient identification of the joint offsets using observations of the manipulator leg parallelism with respect to the base surface. The method employs a simple and low-cost measuring system, which evaluates deviation of the leg location during motions that are assumed to preserve the leg parallelism for the nominal values of the manipulator parameters. Using the measured deviations, the developed algorithm estimates the joint offsets that are treated as the most essential parameters to be identified. The validi…
Belarusian State University of Informatics and Radioelectronics（白俄罗斯信息与无线电电子大学）；Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制研究所）；CNRS（法国国家科学研究中心）；École Centrale de Nantes（南特中央理工学院）；Université de Nantes（南特大学）；École des Mines de Nantes（南特矿业学院）
The paper addresses the geometric synthesis of Orthoglide-type mechanism, a family of 3-DOF parallel manipulators for rapid machining applications, which combine advantages of both serial mechanisms and parallel kinematic architectures. These manipulators possess quasi-isotropic kinematic performances and are made up of three actuated fixed prismatic joints, which are mutually orthogonal and connected to a mobile platform via three parallelogram chains. The platform moves in the Cartesian space with fixed orientation, similar to conventional XYZ-machine. Three strategies have been proposed to …
Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制研究所）
In this article, we propose a method for calculation of the inverse and direct dynamic models of the Orthoglide, a parallel robot with threedegrees of freedom in translation. These models are calculated starting from the elements of the dynamic model of the kinematic chain structure and equations of Newton-Euler applied to the platform. These models are obtained in explicit form having an interesting physical interpretation.
Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制研究所）；Université Polytechnique de Bucarest（布加勒斯特理工大学）
Recursive matrix relations for kinematics and dynamics of the Orthoglide parallel robot having three concurrent prismatic actuators are established in this paper. These are arranged according to the Cartesian coordinate system with fixed orientation, which means that the actuating directions are normal to each other. Three identical legs connecting to the moving platform are located on three planes being perpendicular to each other too. Knowing the position and the translation motion of the platform, we develop the inverse kinematics problem and determine the position, velocity and acceleratio…
Institut de Recherche en Communication et Cybernétique de Nantes（南特通信与控制研究所）
This paper deals with the kinematics and dynamics of a two degree of freedom spherical manipulator, the wrist of Orthoglide 5-axis. The latter is a parallel kinematics machine composed of two manipulators: i) the Orthoglide 3-axis; a three-dof translational parallel manipulator that belongs to the family of Delta robots, and ii) the Agile eye; a two-dof parallel spherical wrist. The geometric and inertial parameters used in the model are determined by means of a CAD software. The performance of the spherical wrist is emphasized by means of several test trajectories. The effects of machining an…
Institut de Recherche en Communication et Cybernétique de Nantes（南特通信与控制研究所）
This paper describes a new parallel kinematic architecture for machining applications, namely, the orthoglide. This machine features three fixed parallel linear joints which are mounted orthogonally and a mobile platform which moves in the Cartesian x-y-z space with fixed orientation. The main interest of the orthoglide is that it takes benefit from the advantages of the popular PPP serial machines (regular Cartesian workspace shape and uniform performances) as well as from the parallel kinematic arrangement of the links (less inertia and better dynamic performances), which makes the orthoglid…
Institut de Recherche en Communications et Cybernétique de Nantes（南特通信与控制研究所）
This paper is devoted to the kinematic design of a new six degree-of-freedom haptic device using two parallel mechanisms. The first one, called orthoglide, provides the translation motions and the second one, called agile eye, produces the rotational motions. These two motions are decoupled to simplify the direct and inverse kinematics, as it is needed for real-time control. To reduce the inertial load, the motors are fixed on the base and a transmission with two universal joints is used to transmit the rotational motions from the base to the end-effector. Two alternative wrists are proposed (…
Institut de Recherche en Communications et Cybernetique de Nantes（南特通信与控制论研究所）；Ecole des Mines de Nantes（南特国立高等矿业学校）；University of Agder（阿格德大学）
The paper is devoted to the compliance errors compensation for parallel manipulators under external loading. Proposed approach is based on the non-linear stiffness modeling and reduces to a proper adjusting of a target trajectory. In contrast to previous works, in addition to compliance errors caused by machining forces, the problem of assembling errors caused by inaccuracy in the kinematic chains is considered. The advantages and practical significance of the proposed approach are illustrated by examples that deal with groove milling with Orthoglide manipulator.
Simon Fraser University（西蒙弗雷泽大学）；School of Engineering Science（工程科学学院）
Screw theory provides geometrical insight into the mechanics of rigid bodies. Screw axis is defined as the line coinciding with the joint axis. Line transformations in the form of a screw operator are used to determine the joint axes of a seven degree of freedom manipulator, representing the human upper limb. Multiplication of a unit screw axis with the joint angular velocity provides the joint twist. Instantaneous motion of a joint is the summation of the twists of the preceding joints and the joint twist itself. Inverse kinematics, velocities and accelerations are calculated using the screw …
A class of analytic planar 3-RPR manipulators is analyzed in this paper. These manipulators have congruent base and moving platforms and the moving platform is rotated of 180 deg about an axis in the plane. The forward kinematics is reduced to the solution of a 3rd-degree polynomial and a quadratic equation in sequence. The singularities are calculated and plotted in the joint space. The second-order singularities (cups points), which play an important role in non-singular change of assembly-mode motions, are also analyzed.
Institut de Recherche en Cybernétique de Nantes（南特控制论研究所）；École Centrale de Nantes（南特中央理工学院）；McGill University（麦吉尔大学）
The subject of this paper is a special class of closed-chain manipulators. First, we analyze a family of two-degree-of-freedom (dof) five-bar planar linkages. Two Jacobian matrices appear in the kinematic relations between the joint-rate and the Cartesian-velocity vectors, which are called the ``inverse kinematics" and the "direct kinematics" matrices. It is shown that the loci of points of the workspace where the condition number of the direct-kinematics matrix remains constant, i.e., the isoconditioning loci, are the coupler points of the four-bar linkage obtained upon locking the middle joi…
