We explore theoretically the electroluminescence of single molecules. We adopt a local-electrode framework that is appropriate for scanning tunneling microscopy (STM) experiments where electroluminescence originates from individual molecules of moderate size on complex substrates: Couplings between the STM tip and molecule and between the molecule and multiple substrate sites are treated on the same footing, as local electrodes contacting the molecule. Electron flow is modelled with the Lippmann-Schwinger Green function scattering technique. The evolution of the electronic energy levels of the molecule under bias is modelled assuming the total charge of the molecule to be invariant, consistent with Coulomb blockade considerations, but that the electronic occupations of the molecular HOMO and LUMO levels vary with changing bias. The photon emission rate is calculated using Fermi's golden rule. We apply this theoretical approach to the STM/Zn-etioporphyrin/Al2O3/NiAl(110) system, and simulate various configurations of coupling strength between the molecule and substrate. We compare our results to the experimental observations of Qiu, Nazin and Ho [Science 299, 542 (2003)] for this system and find that our model provides a comprehensive explanation of a multitude of previously unexplained observations. These include the different types of current-voltage characteristics (CVC's) that are observed experimentally, the observed association of electroluminescence with some CVC's and not others and key properties of the observed photon spectra. Theoretical predictions are presented for further single-molecule electroluminescence experiments.
The electroluminescence of a polythiophene wire suspended between two metallic electrodes is probed using a scanning tunneling microscope. Under positive sample voltage, the spectral and voltage dependencies of the emitted light are consistent with the fluorescence of the wire junction mediated by localized plasmons. This emission is strongly attenuated for the opposite polarity. Both emission mechanism and polarity dependence are similar to what occurs in organic light emitting diodes (OLED) but at the level of a single molecular wire.
Inelastic electron tunneling in a scanning tunneling microscope (STM) is used to generate excitons in monolayer tungsten disulfide (WS$_2$). Excitonic electroluminescence is measured both at positive and negative sample bias. Using optical spectroscopy and Fourier-space optical microscopy, we show that the bias polarity of the tunnel junction determines the spectral and angular distribution of the emitted light. At positive sample bias, only emission from excitonic species featuring an in-plane transition dipole moment is detected. Based on the spectral distribution of the emitted light, we in…
The electroluminescence of molecules confined inside a nanocavity in the scanning tunneling microscopy possesses many intriguing but unexplained features. We present here a general theoretical approach based on the density matrix formalism to describe the electroluminescence from molecules near a metal surface induced by both electron tunneling and local surface plasmon excitations simultaneously. It reveals the underlying physical mechanism for the external bias dependent electroluminescence. The important role played by the local surface plasmon on the electroluminescence is highlighted. Cal…
The coupling between molecular exciton and gap plasmons plays a key role in single molecular electroluminescence induced by a scanning tunneling microscope (STM). But it has been difficult to clarify the complex experimental phenomena. By employing the nonequilibrium Green's function method, we propose a general theoretical model to understand the light emission spectrum from single molecule and gap plasmons from an energy transport point of view. The coherent interaction between gap plasmons and molecular exciton leads to a prominent Fano resonance in the emission spectrum. We analyze the dep…
We calculate circularly polarized luminescence emitted parallel (vertical emission) and perpendicular (edge emission) to the growth direction from a quantum well in a spin light-emitting diode (spin-LED) when either the holes or electrons are spin polarized. It is essential to account for the orbital coherence of the spin-polarized holes when they are captured in the quantum well to understand recent experiments demonstrating polarized edge emission from hole spin injection. The calculations explain many features of the circular polarizations of edge and vertically emitted luminescence for spi…
We have combined ab initio quantum chemistry calculations with a rate-equation formalism to analyze electroluminescence spectra in single-molecule junctions, measured recently by several groups in Scanning Tunneling Microscope setups. In our method, the entire vibrational spectrum is taken into account. Our method leads to good quantitative agreement with both the spectroscopic features of the measurements and their current and voltage dependence. Moreover, our method is able to explain several previously unexplained features. We show that in general, the quantum yield is expected to be suppre…
Excitons and their constituent charge carriers play the central role in electroluminescence mechanisms determining the ultimate performance of organic optoelectronic devices. The involved processes and their dynamics are often studied with time-resolved techniques limited by spatial averaging that obscures the properties of individual electron-hole pairs. Here we overcome this limit and characterize single charge and exciton dynamics at the nanoscale by using time-resolved scanning tunnelling microscopy-induced luminescence (TR-STML) stimulated with nanosecond voltage pulses. We use isolated d…
We show that ordered monolayers of organic molecules stabilized by hydrogen bonding on the surface of exfoliated few-layer hexagonal boron nitride (hBN) flakes may be incorporated into van der Waals heterostructures with integral few-layer graphene contacts forming a molecular/2D hybrid tunneling diode. Electrons can tunnel from through the hBN/molecular barrier under an applied voltage VSD and we observe molecular electroluminescence from an excited singlet state with an emitted photon energy > eVSD, indicating up-conversion by energies up to ~ 1 eV. We show that tunnelling electrons excite e…
We investigate electroluminescence of single molecular emitters on NaCl on Ag(111) and Au(111) with submolecular resolution in a low-temperature scanning probe microscope with tunneling current, atomic force and light detection capabilities. Role of the tip state is studied in the photon maps of a prototypical emitter, zinc phthalocyanine (ZnPc), using metal and CO-metal tips. CO-functionalization is found to have a dramatic impact on the resolution and contrast of the photon maps due to the localized overlap of the p-orbitals on the tip with the molecular orbitals of the emitter. The possibil…
We study fluctuations in plasmonic electroluminescence at the single-atom limit profiting from the precision of a low-temperature scanning tunneling microscope. First, we investigate the influence of a controlled single-atom transfer on the plasmonic properties of the junction. Next, we form a well-defined atomic contact of several quanta of conductance. In contact, we observe changes of the electroluminescence intensity that can be assigned to spontaneous modifications of electronic conductance, plasmonic excitation and optical antenna properties all originating from minute atomic rearrangeme…
A scanning tunneling microscope (STM) can do more than atomic imaging and manipulation. Its tunneling current can also be used for the excitation of light, converting electron energy to photon energy. STM based single-molecule electroluminescence can be realized by adopting a combined strategy of both efficient electronic decoupling and nanocavity plasmonic enhancement. The emission intensity, upon optimized material combination for the molecule, spacer, tip, and substrate, can be strong and stable enough for performing second-order photon correlation measurements. The observation of an eviden…
Thanks to their highly tunable band gaps, graphene nanoribbons (GNRs) with atomically precise edges are emerging as mechanically and chemically robust candidates for nanoscale light emitting devices of modulable emission color. While their optical properties have been addressed theoretically in depth, only few experimental studies exist, limited to ensemble measurements and without any attempt to integrate them in an electronic-like circuit. Here we report on the electroluminescence of individual GNRs suspended between the tip of a scanning tunneling microscope (STM) and a Au(111) substrate, c…
Probing up-conversion electroluminescence of decoupled porphyrin molecules in a plasmonic nanocavity
Max-Planck-Institut für Festkörperforschung（马克斯·普朗克固体研究所）；Institut de Physique, École Polytechnique Fédéral Lausanne（洛桑联邦理工学院物理研究所）；Gleb Wataghin Institute of Physics - University of Campinas - UNICAMP（坎皮纳斯大学格莱布·瓦塔金物理研究所）；Nanjing University（南京大学）
Understanding of the electroluminescence (EL) mechanism in optoelectronic devices is important for further optimization of their efficiency and effectiveness. Here, a quantum mechanical approach is formulated for modeling EL processes in nanoscale light emitting diodes (LED). Based on nonequilibrium Green's function quantum transport equations, interactions with electromagnetic vacuum environment is included to describe electrically driven light emission in the devices. Numerical studies of a silicon nanowire LED device are presented. EL spectra of the nanowire device under different bias volt…
Disentangling the contributions of radiative and non-radiative localized plasmonic modes from the photonic density of states of metallic nanocavities between atomically-sharp tips and flat substrates remains an experimental challenge nowadays. Electroluminescence due to tunnelling through the tip-substrate gap allows discerning solely the excitation of radiative modes, but this information is inherently convolved with that of the electronic structure of the system. In this work we present a fully experimental procedure to eliminate the electronic-structure factors from the scanning tunnelling …
The interplay between the oxidation state and the optical properties of molecules plays a key role for applications in displays, sensors or molecular-based memories. The fundamental mechanisms occurring at the level of a single-molecule have been difficult to probe. We used a scanning tunneling microscope (STM) to characterize and control the fluorescence of a single Zn-phthalocyanine radical cation adsorbed on a NaCl-covered Au(111) sample. The neutral and oxidized states of the molecule were identified on the basis of their fluorescence spectra that revealed very different emission energies …
Detecting the photons emitted from single quantum objects is highly desired to diagnose nano-scale devices. It has been, however, believed very difficult to sense single atoms in optical spectroscopy due to the inferior detection efficiency. We demonstrate here the successful detection of the characteristic x-ray signals from single Er atoms in energy dispersive x-ray spectroscopy (EDX). Highly focused electron probe in an aberration-corrected scanning transmission electron microscope (STEM) was used to excite the single Er atoms aligned in carbon cages, namely the peapod. The intensities of E…
Recent scanning tunnelling microscopy (STM) experiments reported single-molecule fluorescence induced by tunneling currents in the nanoplasmonic cavity formed by the STM tip and the substrate.The electric field of the cavity mode couples with the current-induced charge fluctuations of the molecule, allowing the excitation of the mode. We investigate theoretically this system for the experimentally relevant limit of large damping rate $κ$ for the cavity mode and arbitrary coupling strength to a single-electronic level. We find that for bias voltages close to the first inelastic threshold of pho…
Visible and infra-red light emitted at a Ag-Ag(111) junction has been investigated from tunneling to single atom contact conditions with a scanning tunneling microscope. The light intensity varies in a highly nonlinear fashion with the conductance of the junction and exhibits a minimum at conductances close to the conductance quantum. The data are interpreted in terms of current noise at optical frequencies, which is characteristic of partially open transport channels.
Unusual emission of visible light is observed in scanning tunneling microscopy of the quantum well system Na on Cu(111). Photons are emitted at energies exceeding the energy of the tunneling electrons. Model calculations of two-electron processes which lead to quantum well transitions reproduce the experimental fluorescence spectra, the quantum yield, and the power-law variation of the intensity with the excitation current.
We report a new method for quantitative estimation of graphene layer thicknesses using high contrast imaging of graphene films on insulating substrates with a scanning electron microscope. By detecting the attenuation of secondary electrons emitted from the substrate with an in-column low-energy electron detector, we have achieved very high thickness-dependent contrast that allows quantitative estimation of thickness up to several graphene layers. The nanometer scale spatial resolution of the electron micrographs also allows a simple structural characterization scheme for graphene, which has b…
Giant Purcell broadening and Lamb shift for DNA-assembled near-infrared quantum emitters
Ecole Polytechnique Fédérale de Lausanne (EPFL)（洛桑联邦理工学院）；University of Fribourg（弗里堡大学）；Materials Physics Center CSIC-UPV/EHU（CSIC-巴斯克国立自治大学材料物理中心）；Donostia International Physics Center (DIPC)（圣塞巴斯蒂安国际物理中心）；Ikerbasque, Basque Foundation for Science（伊克拉巴斯科，巴斯克科学基金会）；University of the Basque Country (UPV/EHU)（巴斯克国立自治大学）
