The spectroscopic properties of Tm3+/Yb3+ co-doped silica fibers under excitation at 980 nm are reported. Three distinct up-conversion fluorescence bands were observed in the visible to near infra-red regions. The blue and red fluorescence bands at 475 and 650 nm, respectively, were found to originate from the 1G4 level of Tm3+. A three step up-conversion process was established as the populating mechanism for these fluorescence bands. The fluorescence band at 800 nm was found to originate from two possible transitions in Tm3+; one being the transition from the 3H4 to 3H6 manifold which was found to dominate at low pump powers; the other being the transition from the 1G4 to 3H6 level which dominates at higher pump powers. The fluorescence lifetime of the 3H4 and 3F4 levels of Tm3+ and 2F5/2 level of Yb3+ were studied as a function of Yb3+ concentration, with no significant energy back transfer from Tm3+ to Yb3+ observed.
Developing of new rare-earth (RE)-doped optical fibres for power amplifiers and lasers requires continuous improvements in the fibre spectroscopic properties (like shape and width of the gain curve, optical quantum efficiency, resistance to spectral hole burning and photodarkening...). Silica glass as a host material for fibres has proved to be very attractive. However, some potential applications of RE-doped fibres suffer from limitations in terms of spectroscopic properties resulting from clustering or inappropriate local environment when doped into silica. To this aim, we present a new rout…
The main modelling methods devoted to microstrutured air-silica optical fibres (MOFs) are presented and discussed. Then, the specific propagation properties of MOFs are studied in detail. Characteristics measured on fibres manufactured in our laboratory or reported in the literature are analysed. A large number of potential and demonstrated applications are presented and the obtained performances are discussed. A particular attention is given to hollow- core photonic bandgap fibres and their applications.
Erbium doped materials are of great interest in optical telecommunications due to the Er3+ intra-4f emission at 1.54 ?m. Erbium doped fibre amplifiers (EDFA) were developed in silica glass because of the low losses at this wavelength and the reliability of this glass. Developments of new rare earth doped fibre amplifiers aim to control their spectroscopic properties including shape and width of the gain curve and optical quantum efficiency. Standard silica glass modifiers, such as aluminium, result in very good properties in current EDFA. However, for more drastic spectroscopic changes, more i…
Thulium-doped optical fibre amplifiers (TDFA) are developed to extend the optical telecommunication wavelength division multiplexing (WDM) bandwidth in the so-called S-band (1460-1530 nm). The radiative transition at 1.47 lm (3H4 -> 3F4) competes with a non-radiative multi-phonon de-excitation (3H4 -> 3H5). The quantum efficiency of the transition of interest is then highly affected by the phonon energy (Ep) of the material. For reliability reasons, oxide glasses are preferred but suffer from high phonon energy. In the case of silica glass, Ep is around 1100 cm-1 and quantum efficiency is as l…
We have made chromium-doped, silica-based preforms and optical fibres by Modified Chemical Vapour Deposition and have studied the influence of the chemical composition of the doped region on the Cr-oxidation states and the spectroscopic properties of the samples. Chromium, introduced initially as Cr3+, is partially or totally oxidized during the fabrication process, and is stabilized in the core of the preforms and fibres as Cr3+ in octahedral coordination, and/or as Cr4+ in distorded tetrahedral coordination (Cs). Small concentrations (~1-2 mol%) of codopants in silica, such as germanium or a…
The role of some glass network modifiers on the quantum efficiency of the near-infrared fluorescence from the 3H4 level of Tm3+ ion in silica-based doped fibres is studied. Modifications of the core composition affect the spectroscopic properties of Tm3+ ion. Adding 17.4 mol% of AlO3/2 to the core glass caused an increase of the 3H4 level lifetime up to 50 $μ$s, 3.6 times higher than in pure silica glass. The quantum efficiency was increased from 2% to approximately 8%. On the opposite, 8 mol% of PO5/2 in the core glass made the lifetime decrease downto 9 $μ$s. These changes of Tm3+ optical pr…
In rare-earth-doped silica optical fibres, the homogeneous distribution of amplifying ions and part of their spectroscopic properties are usually improved by adding selected elements, such as phosphorus or aluminum, as structural modifier. In erbium ion (Er3+) doped fibres, phosphorus preferentially coordinates to Er3+ ions to form regular cages around it. However, the crystalline structures described in literature never gave particular spectroscopic signature. In this article, we report emission and excitation spectra of Er3+ in a transparent phosphorus-doped silica fibre preform. The observe…
A central goal in quantum information science is to efficiently interface photons with single optical modes for quantum networking and distributed quantum computing. Here, we introduce and experimentally demonstrate a compact and efficient method for the low-loss coupling of a solid-state qubit, the nitrogen vacancy (NV) centre in diamond, with a single-mode optical fibre. In this approach, single-mode tapered diamond waveguides containing exactly one high quality NV memory are selected and integrated on tapered silica fibres. Numerical optimization of an adiabatic coupler indicates that near-…
An explanation is offered for the large anomalous electro-optic (e.o.) effect reported by Fujiwara in 1994. It is based on the large e.o. coefficient of ordered water at an interface measured in recent years. The concept of water-based photonics is introduced, suggesting that liquid states of matter can allow ready shaping and exploitation of many processes in ways not previously considered.
We demonstrate a fibre-based approach that generates mid-infrared femtosecond pulses in the 3-4 μm spectral region with microjoule-level single pulse energy. This is realised in a piece of gas-filled antiresonant hollow-core fibre that is pumped by a two-micron light source. A rapid variation of the dispersion near a structural resonance of the fibre creates a phase-matching point in the mid-infrared, which mediates the frequency-down conversion. We generate femtosecond pulses centred at 3.16 μm wavelength with the pulse energy of more than 1 μJ, achieving the conversion efficiency as high as …
The strong waveguide dispersion in photonic crystal fibres provides unique opportunities for nonlinear optics with a zero-dispersion wavelength $λ_0$ far below the limit of ~1.3 micron set by the material dispersion of silica. By tuning the air-hole diameter d, the pitch Lambda, and the number of rings of air holes N, the strong waveguide dispersion can in principle be used to extend lambda_0 well into the visible, albeit to some extend at the cost of multimode operation. We study in detail the interplay of the zero-dispersion wavelength, the cut-off wavelength lambda_c, and the leakage loss i…
The scattering and absorption suppression of the silica microspheres is experimentally achieved by semicontinuous gold shell synthesized on the silica microspheres. These fractal gold shells on the silica spheres are shown to have significant extinction in the visible and mid-infrared spectral range. It is found that the silica scattering peak in the visible and the relative contribution of the vibrational stretching band in the infrared gradually decreases with increasing of the gold coverage.
Using the shifted-excitation Raman difference spectroscopy technique and an optical fibre featuring a negative curvature excitation core and a coaxial ring of high numerical aperture collection cores, we have developed a portable, background and fluorescence free, endoscopic Raman probe. The probe consists of a single fibre with a diameter of less than 0.25 mm packaged in a sub-millimetre tubing, making it compatible with standard bronchoscopes. The Raman excitation light in the fibre is guided in air and therefore interacts little with silica, enabling an almost background free transmission o…
A study of the mechanisms responsible for the infra-red to near infra-red up-conversion in Tm3+-doped silica fibers is presented. Upconversion luminescence was observed from the 3H4 level of Tm3+ under 1586 nm pumping into the 3F4 level. The quadratic dependence of the up-conversion luminescence at 800 nm on the 1800 nm luminescence from the 3F4 level confirms that the 3H4 level is populated by a two photon process. Two possible processes are proposed as mechanisms responsible for the up-conversion: excited state absorption and energy transfer up-conversion. The decay characteristics of the lu…
The realization of a future quantum Internet requires processing and storing quantum information at local nodes, and interconnecting distant nodes using free-space and fibre-optic links. Quantum memories for light are key elements of such quantum networks. However, to date, neither an atomic quantum memory for non-classical states of light operating at a wavelength compatible with standard telecom fibre infrastructure, nor a fibre-based implementation of a quantum memory has been reported. Here we demonstrate the storage and faithful recall of the state of a 1532 nm wavelength photon, entangle…
This work reports optical functionality contained in, as well as and produced by, thin film coatings. A sol-gel process, formulated with precursor active ingredients of erbium oxide and tetraethylorthosilicate (TEOS), was used for spin-coating thin (~130 nm) erbium-doped (~6 at. %) silica films on single-crystal silicon. Annealed films produce infrared emission in the 1.5-micron band from erbium ions in the film, as well as greatly enhancing (~100X) band-gap emission from the underlying silicon. The distinctly different mechanisms for the two modes of optical activities are interpreted in term…
