We present a new photon number resolving detector (PNR), the Parallel Nanowire Detector (PND), which uses spatial multiplexing on a subwavelength scale to provide a single electrical output proportional to the photon number. The basic structure of the PND is the parallel connection of several NbN superconducting nanowires (100 nm-wide, few nm-thick), folded in a meander pattern. Electrical and optical equivalents of the device were developed in order to gain insight on its working principle. PNDs were fabricated on 3-4 nm thick NbN films grown on sapphire (substrate temperature TS=900C) or MgO (TS=400C) substrates by reactive magnetron sputtering in an Ar/N2 gas mixture. The device performance was characterized in terms of speed and sensitivity. The photoresponse shows a full width at half maximum (FWHM) as low as 660ps. PNDs showed counting performance at 80 MHz repetition rate. Building the histograms of the photoresponse peak, no multiplication noise buildup is observable and a one photon quantum efficiency can be estimated to be QE=3% (at 700 nm wavelength and 4.2 K temperature). The PND significantly outperforms existing PNR detectors in terms of simplicity, sensitivity, speed, and multiplication noise.
We present the experimental demonstration of a superconducting photon number resolving detector. It is based on the series connection of N superconducting nanowires, each connected in parallel to an integrated resistor. The device provides a single voltage readout, proportional to the number of photons absorbed in distinct nanowires. Clearly separated output levels corresponding to the detection of n=1-4 photons are observed in a 4-element detector fabricated from an NbN film on GaAs substrate, with a single-photon system quantum efficiency of 2.6% at the wavelength of 1300nm. The series-nanow…
The Parallel Nanowire Detector (PND) is a photon number resolving (PNR) detector which uses spatial multiplexing on a subwavelength scale to provide a single electrical output proportional to the photon number. The basic structure of the PND is the parallel connection of several NbN superconducting nanowires (100 nm-wide, few nm-thick), folded in a meander pattern. PNDs were fabricated on 3-4 nm thick NbN films grown on MgO (TS=400C) substrates by reactive magnetron sputtering in an Ar/N2 gas mixture. The device performance was characterized in terms of speed and sensitivity. PNDs showed a cou…
Time- and number-resolved photon detection is crucial for photonic quantum information processing. Existing photon-number-resolving (PNR) detectors usually have limited timing and dark-count performance or require complex fabrication and operation. Here we demonstrate a PNR detector at telecommunication wavelengths based on a single superconducting nanowire with an integrated impedance-matching taper. The prototyping device was able to resolve up to five absorbed photons and had 16.1 ps timing jitter, <2 c.p.s. device dark count rate, $\sim$86 ns reset time, and 5.6% system detection efficienc…
Deep space explorations require transferring huge amounts of data quickly from very distant targets. Laser communication is a promising technology that can offer a data rate of magnitude faster than conventional microwave communication due to the fundamentally narrow divergence of light. This study demonstrated a photon-sensitive receiver prototype with over Gigabit data rate, immunity to strong background photon noise, and simultaneous tracking ability. The advantages are inherited from a joint-optimized superconducting nanowire single-photon detector (SNSPD) array, designed into a four-quadr…
Here we propose a new design paradigm for a superconducting nanowire single photon detector that uses a multi-layer architecture that places the electric leads beneath the nanowires. This allows for a very large number of detector elements, which we will call pixels in analogy to a conventional CCD camera, to be placed in close proximity. This leads to significantly better photon number resolution than current single and multi-nanowire meanders, while maintaining similar detection areas. We discuss the reset time of the pixels and how the design can be modified to avoid the latching failure se…
A photon-number-resolving detector based on a four-element superconducting nanowire single photon detector is demonstrated to have sub-30-ps resolution in measuring the arrival time of individual photons. This detector can be used to characterize the photon statistics of non-pulsed light sources and to mitigate dead-time effects in high-speed photon counting applications. Furthermore, a 25% system detection efficiency at 1550 nm was demonstrated, making the detector useful for both low-flux source characterization and high-speed photon-counting and quantum communication applications. The desig…
We have fabricated ultrafast dark count-free soft X-ray single-photon detectors (X-SNSPDs) from TaN with various conduction path widths, and we compare their properties with corresponding data from a Nb X-SNSPD. The TaN X-SNSPDs offer an improved detector performance regarding device detection efficiency, latching and pulse amplitudes. Wide conduction paths allow for a certain energy-resolving capability in contrast to narrow TaN conduction paths. However, wide paths also limit the detection efficiency at low temperatures, which can be explained within a hot-spot model.
Multiphoton contributions pose a significant challenge for the realisation of heralded single-photon sources (HSPS) based on nonlinear processes. In this work, we improve the quality of single photons generated in this way by harnessing the photon-number resolving (PNR) capabilities of commercial superconducting nanowire single-photon detectors (SNSPDs). We report a $13 \pm 0.4 \%$ reduction in the intensity correlation function $g^{(2)}(0)$ even with a collection efficiency in the photon source of only $29.6\%$. Our work demonstrates the first application of the PNR capabilities of SNSPDs and…
Coincidence detection of single photons is crucial in numerous quantum technologies and usually requires multiple time-resolved single-photon detectors. However, the electronic readout becomes a major challenge when the measurement basis scales to large numbers of spatial modes. Here, we address this problem by introducing a two-terminal coincidence detector that enables scalable readout of an array of detector segments based on superconducting nanowire microstrip transmission line. Exploiting timing logic, we demonstrate a 16-element detector that resolves all 136 possible single-photon and t…
Detecting spatial and temporal information of individual photons by using single-photon-detector (SPD) arrays is critical to applications in spectroscopy, communication, biological imaging, astronomical observation, and quantum-information processing. Among the current SPDs1,detectors based on superconducting nanowires have outstanding performance2, but are limited in their ability to be integrated into large scale arrays due to the engineering difficulty of high-bandwidth cryogenic electronic readout3-8. Here, we address this problem by demonstrating a scalable single-photon imager using a si…
Photon-number resolving (PNR) single-photon detectors are of interest for a wide range of applications in the emerging field of photon based quantum technologies. Especially photonic integrated circuits will pave the way for a high complexity and ease of use of quantum photonics. Superconducting nanowire single-photon detectors (SNSPDs) are of special interest since they combine a high detection efficiency and a high timing accuracy with a high count rate and they can be configured as PNR-SNSPDs. Here, we present a PNR-SNSPD with a four photon resolution suitable for waveguide integration oper…
Certification of the genuine resolution of photon number resolving detectors
University of Geneva（日内瓦大学）；Constructor University（Constructor 大学）；Uppsala University（乌普萨拉大学）；KTH Royal Institute of Technology（瑞典皇家理工学院）；Stockholm University（斯德哥尔摩大学）
We describe an electrothermal model for the turn-on dynamics of superconducting nanowire single-photon detectors (SNSPDs). By extracting a scaling law from a well-known electrothermal model of SNSPDs, we show that the rise-time of the readout signal encodes the photon number as well as the length of the nanowire with scaling $t_\text{rise}\propto \sqrt{\ell/n}$. We show that these results hold regardless of the exact form of the thermal effects. This explains how SNSPDs have inherent photon-number resolving capability. We experimentally verify the photon number dependence by collecting wavefor…
Single-photon detectors are ubiquitous in quantum information science and quantum sensing. They are key enabling technologies for numerous scientific discoveries and fundamental tests of quantum optics. Photon-number-revolving detectors are the ultimate measurement tool of light. However, few detectors to date can provide high-fidelity photon number resolution at few-photon levels. Here, we demonstrate an on-chip detector that can resolve up to 100 photons by spatiotemporally multiplexing an array of superconducting nanowires along a single waveguide. The unparalleled photon number resolution …
Superconducting detectors are now well-established tools for low-light optics, and in particular quantum optics, boasting high-efficiency, fast response and low noise. Similarly, lithium niobate is an important platform for integrated optics given its high second-order nonlinearity, used for high-speed electro-optic modulation and polarization conversion, as well as frequency conversion and sources of quantum light. Combining these technologies addresses the requirements for a single platform capable of generating, manipulating and measuring quantum light in many degrees of freedom, in a compa…
