高Q因数CMOS-MEMS电感器
High Q-factor CMOS-MEMS inductor
摘要:
本研究研究采用互补金属氧化物半导体(CMOS)工艺和后处理工艺制作的高Q因子螺旋电感。螺旋电感采用0.35微米CMOS工艺在硅衬底上制作。为了降低衬底损耗和提高电感的Q值,电感下面的硅衬底被使用后处理去除。后处理采用RIE(反应离子刻蚀)刻蚀二氧化硅牺牲层,然后采用TMAH(四甲基氢氧化铵)去除底层硅衬底,得到悬浮螺旋电感。后处理的优点是与CMOS工艺兼容。使用Agilent 8510C网络分析仪和Cascade探针台测量螺旋电感的性能。实验表明,该螺旋电感在11 GHz时Q值为15,在25.5 GHz时电感值为4 nH,自谐振频率约为27 GHz。
英文摘要:
This study investigates a high Q-factor spiral inductor fabricated by the CMOS (complementary metal oxide semiconductor) process and a post-process. The spiral inductor is manufactured on silicon substrate using the 0.35 micrometers CMOS process. In order to reduce the substrate loss and enhance the Q-factor of the inductor, silicon substrate under the inductor is removed using a post-process. The post-process uses RIE (reactive ion etching) to etch the sacrificial layer of silicon dioxide, and then TMAH (tetra methyl ammonium hydroxide) is employed to remove the underlying silicon substrate and obtain the suspended spiral inductor. The advantage of the post process is compatible with the CMOS process. The Agilent 8510C network analyzer and a Cascade probe station are used to measure the performances of the spiral inductor. Experiments indicate that the spiral inductor has a Q-factor of 15 at 11 GHz, an inductance of 4 nH at 25.5 GHz and a self-resonance frequency of about 27 GHz.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。