arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1210.3491cs.OH
收藏

基于微机电系统微处理器的倍频器

Microelectromechanical system cantilever-based frequency doublers

Joydeep Basu, Tarun K. Bhattacharyya

摘要:

基于微机电系统(MEMS)的片上谐振器为参考振荡器和滤波器等高频信号处理电路提供了巨大的潜力。这是由于他们的特殊功能,如小尺寸,大的频率品质因数产品,与CMOS集成电路的可集成性,低功耗,低成本批量制造等的电容传感悬臂梁谐振器是一个这样的流行MEMS谐振器拓扑结构。在这封信中,固有的平方律非线性的悬臂梁谐振器的电容传感器的电压到力的传递函数已被用于实现倍频效果。使用这个概念,倍频的输入信号为500 kHz至1 MHz,和227.5 kHz至455 kHz的实验证明了两个悬臂梁的长度分别为51.75和76.75微米。MEMS悬臂梁已与多晶硅使用PolyMUMPs表面微机械加工工艺制造,并已进行测试,使用激光多普勒测振仪。试验结果与理论分析和CoventorWare有限元模拟结果吻合较好。悬臂梁倍频器所表现出的高效率使其成为高频信号产生的理想选择。

英文摘要:

Microelectromechanical system (MEMS) based on-chip resonators offer great potential for high frequency signal processing circuits like reference oscillators and filters. This is due to their exceptional features like small size, large frequency-quality factor product, integrability with CMOS ICs, low power consumption, low cost batch fabrication etc. A capacitively transduced cantilever beam resonator is one such popular MEMS resonator topology. In this letter, the inherent square-law nonlinearity of the voltage-to-force transfer function of a cantilever resonator's capacitive transducer has been employed for the realization of frequency doubling effect. Using this concept, frequency doubling of input signals of 500 kHz to 1 MHz, and 227.5 kHz to 455 kHz has been experimentally demonstrated for two cantilever beams of length 51.75 and 76.75 micrometer respectively. The MEMS cantilevers have been fabricated with polysilicon using the PolyMUMPs surface micromachining process, and their testing has been performed using Laser Doppler Vibrometry. The test results obtained are in reasonable compliance with the analytical and CoventorWare finite-element simulation results. The high efficiency demonstrated by the cantilever frequency doubler makes it a promising choice for signal generation at high frequencies.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑