在薄SOI中制备MEMS谐振器
Fabrication of MEMS Resonators in Thin SOI
摘要:
提出了一种在薄SOI材料中制作深亚微米换能间隙微机电谐振器的简单快速工艺。薄的SOI晶片对于先进的CMOS技术是重要的,因此被评估为将来与单个芯片上的CMOS电路共集成的谐振器衬底。由于换能电容随谐振器厚度成比例,因此重要的是制造深亚微米沟槽以实现良好的电容耦合。通过传统的UV光刻和聚焦离子束(FIB)铣削的组合,该工艺仅需要两个光刻步骤,因此能够实现MEMS谐振器的快速原型制作。本文比较了不同的FIB参数和刻蚀参数对工艺的影响。
英文摘要:
A simple and fast process for micro-electromechanical (MEM) resonators with deep sub-micron transduction gaps in thin SOI is presented in this paper. Thin SOI wafers are important for advanced CMOS technology and thus are evaluated as resonator substrates for future co-integration with CMOS circuitry on a single chip. As the transduction capacitance scales with the resonator thickness, it is important to fabricate deep sub-micron trenches in order to achieve a good capacitive coupling. Through the combination of conventional UV-lithography and focused ion beam (FIB) milling the process needs only two lithography steps, enabling therefore a way for fast prototyping of MEM-resonators. Different FIB parameters and etching parameters are compared in this paper and their effect on the process are reported.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。