arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 0802.3083cs.OH
收藏

应用于MEMS的弹簧桥接独立微梁的单调和疲劳试验

Monotonic and fatigue testing of spring-bridged freestanding microbeams application for MEMS

Ming-Tzer Lin, K. -S. Shiu, Chi-Jia Tong

摘要:

随着微尺度系统和器件的设计、制造和商业化研究的不断深入,微机电系统(MEMS)技术得到了迅速发展。准确了解MEMS薄膜材料的力学行为对MEMS的成功设计和开发具有重要意义。在这里,一种新型的电镀弹簧桥微拉伸试件集成销-销对齐孔,错位补偿弹簧,负载传感器梁和独立薄膜的演示和制作。将试样装入一台专门设计的微机械装置中,对亚微米自支撑薄膜进行一系列单调拉伸试验。测试了可用作MEMS中的结构或运动齿轮的某些薄膜,包括溅射金、铜和氮化钽薄膜。金属样品通过溅射制备;对于氮化钽膜样品,在硅晶片上溅射钽膜的过程中向腔室中引入氮气。样品制造方法包括三个光刻步骤和两个电镀铜步骤,以保持狗骨独立薄膜。使用标准的湿法蚀刻或剥离技术,一系列的微拉伸试样图案化的金属薄膜,孔,和种子层的弹簧和框架结构上的氧化硅涂层的硅衬底。两道电镀制程,以区分测试晶片的弹簧与框架部份。最后,化学蚀刻去除氧化硅,使电镀样品与硅衬底分离。

英文摘要:

Microelectromechanical systems (MEMS) technologies are developing rapidly with increasing study of the design, fabrication and commercialization of microscale systems and devices. Accurate knowledge on the mechanical behaviors of thin film materials used for MEMS is important for successful design and development of MEMS. Here a novel electroplating spring-bridge micro-tensile specimen integrates pin-pin align holes, misalignment compensate spring, load sensor beam and freestanding thin film is demonstrated and fabricated. The specimen is fit into a specially designed micro-mechanical apparatus to carry out a series of monotonic tensile testing on sub-micron freestanding thin films. Certain thin films applicable as structure or motion gears in MEMS were tested including sputtered gold, copper and tantalum nitride thin films. Metal specimens were fabricated by sputtering; for tantalum nitride film samples, nitrogen gas was introduced into the chamber during sputtering tantalum films on the silicon wafer. The sample fabrication method involves three steps of lithography and two steps of electroplating copper to hold a dog bone freestanding thin film. Using standard wet etching or lift off techniques, a series of microtensile specimens were patterned in metal thin films, holes, and seed layer for spring and frame structure on the underlying silicon oxide coated silicon substrate. Two steps of electroplating processing to distinct spring and frame portion of the test chip. Finally, chemical etched away the silicon oxide to separated electroplated specimen and silicon substrate.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑