We present theoretical evidence, based on total-energy first-principles calculations, of the existence of spin-polarized states well localized at and extended along the edges of bare zigzag boron nitride nanoribbons. Our calculations predict that all the magnetic configurations studied in this work are thermally accessible at room temperature and present an energy gap. In particular, we show that the high spin state, with a magnetic moment of 1 $μ_B$ at each edge atom, presents a rich spectrum of electronic behaviors as it can be controlled by applying an external electric field in order to obtain metallic $\leftrightarrow$ semiconducting $\leftrightarrow$ half-metallic transitions.
High pressure Raman experiments on Boron Nitride multi-walled nanotubes show that the intensity of the vibrational mode at ~ 1367 cm-1 vanishes at ~ 12 GPa and it does not recover under decompression. In comparison, the high pressure Raman experiments on hexagonal Boron Nitride show a clear signature of a phase transition from hexagonal to wurtzite at ~ 13 GPa which is reversible on decompression. These results are contrasted with the pressure behavior of carbon nanotubes and graphite.
Using ab initio calculations based on density-functional theory we have performed a theoretical investigation of substitutional boron and nitrogen impurities in silicon carbide (SiC) nanoribbons. We have considered hydrogen terminated SiC ribbons with zigzag and armchair edges. In both systems we verify that the boron and nitrogen atoms energetically prefer to be localized at the edges of the nanoribbons. However, while boron preferentially substitutes a silicon atom, nitrogen prefers to occupy a carbon site. In addition, our electronic-structure calculations indicate that (i) substitutional b…
Graphene nanoribbons are prepared inside boron nitride nanotubes by liquid phase encapsulation and subsequent annealing of 1,2,4-trichlorobenzene. The product is imaged with high resolution transmission electron microscopy, and characterized by optical absorption and Raman spectroscopy. Carbon-containing material is detected inside the boron nitride nanotubes with energy-dispersive x-ray spectroscopy (EDS) and scanning transmission electron microscopy (STEM). The observed structures twist under the electron beam and the characteristic features of nanoribbons appear in the Raman spectra.
Uniaxial tensile properties of hexagonal boron nitride nanoribbons and dependence of these properties on temperature, strain rate, and the inclusion of vacancy defects have been explored with molecular dynamics simulations using Tersoff potential. The ultimate tensile strength of pristine hexagonal boron nitride nanoribbon of 26 nm x 5 nm with armchair chirality is found to be 100.5 GPa. The ultimate tensile strength and strain have been found decreasing with increasing the temperature while an opposite trend has been observed for increasing the strain rate. Furthermore, the vacancy defects re…
As a possible way of modifying the intrinsic properties of graphene we study the doping of graphene by embedded boron clusters with density functional theory. Cluster doping is technologically relevant as the cluster implantation technique can be readily applied to graphene. We find that B7 clusters embedded into graphene and graphene nanoribbons are structurally stable and locally metallize the system. This is done both by the reduction of the Fermi energy and by the introduction of boron states near the Fermi level. A linear chain of boron clusters forms a metallic "wire" inside the graphene…
A recent study associate carbon with single photon emitters (SPEs) in hexagonal boron nitride (h-BN). This observation, together with the high mobility of carbon in h-BN suggest the existence of SPEs based on carbon clusters. Here, by means of density-functional theory calculations we studied clusters of substitutional carbon atoms up to tetramers in hexagonal boron nitride. Two different conformations of neutral carbon trimers have zero-point line energies and shifts of the phonon sideband compatible with typical photoluminescence spectra. Moreover, some conformations of two small C clusters …
The hybrid graphene - hexagonal boron nitride (G-hBN) systems offer new routes in the design of nanoscale electronic devices. Using {\it ab initio} density functional theory calculations we investigate the dynamics of zig-zag nanoribbons a few interatomic distances wide. Several structures are analyzed, namely pristine graphene, hBN and G-hBN systems. By passivating the nanoribbon edges with hydrogen and different halogen atoms, one may tune the electronic and mechanical properties, like the band gap energies and the natural frequencies of vibration.
In an attempt to understand why catalytic methods for the growth of boron nitride nanotubes work much worse than for their carbon counterparts, we use first-principles calculations to study the energetics of elemental reactions forming N2, B2 and BN molecules on an iron catalyst. We observe that in the case of these small molecules, the catalytic activity is hindered by the formation of B2 on the iron surface. We also observe that the local morphology of a step edge present in our nanoparticle model stabilizes the boron nitride molecule with respect to B2 due to the ability of the step edge to…
Electronic properties of zigzag boron-carbon-nitride (BCN) nanoribbons, where the outermost C atoms on the edges of graphene nanoribbons are replaced by B or N atoms, are theoretically studied using the first-principles calculations. We show that BCN nanoribbons are metallic, since several bands cross the Fermi level. For BCN nanoribbons in a rich H$_2$ environment, the so-called nearly free electron state appears just above the Fermi level because of the intrinsic giant Stark effect due to the internal electric field of a transverse dipole moment. The position of the nearly free electron stat…
The current rechargeable battery technologies have a failure in their performance at high pressure and temperature. In this article, we have brought theoretical insights on using boron nitride flakes as a protecting layer for a lithium-ion battery device and extended its application for a spin-dependent photon emission device. Hence, the electronic properties of pristine and lithium-doped hydrogen-edged boron nitride flakes have been studied by the first principle density functional theory calculations. In this study, we have discussed the stability, adsorption energies, bond lengths, electron…
Inspired by the successful synthesis of several allotropes, boron sheets have been one of the hottest spot areas of focus in various fields. Here, we study phonon transport in three types of boron nanoribbons with zigzag and armchair edges by using a non-equilibrium Green's function combined with first principles methods. Diverse transport properties are found in the nanoribbons. At the room temperature, their highest thermal conductance can be comparable with that of graphene, while the lowest thermal conductance is less than half of graphene's. The three boron sheets exhibit different anisot…
Imaging and spectroscopy performed in a low-voltage scanning transmission electron microscope (LV-STEM) are used to characterize the structure and chemical properties of boron-terminated tetravacancies in hexagonal boron nitride (h-BN). We confirm earlier theoretical predictions about the structure of these defects and identify new features in the electron energy-loss spectra (EELS) of B atoms using high resolution chemical maps, highlighting differences between these areas and pristine sample regions. We correlate our experimental data with calculations which help explain our observations.
The effect of doping of cubic boron nitride with beryllium, silicon, sulfur and magnesium on the lattice parameters, electrical conductivity and EPR spectra has been studied. It is established that the degree of doping increases significantly in the case of crystallization of cubic boron nitride from BN solutions in supercritical ammonia at 3.9-4.2 GPa and 1100°C in comparison with the conventional synthesis from melts of the Mg-B-N system at 4.2 GPa and 1400°C. Doping with silicon and beryllium results in semiconductor properties of cubic boron nitride.
Cathodoluminescence imaging and spectroscopy experiments on a single bamboo-like boron nitride nanotube are reported. Imaging experiments show that the luminescence is located all along the nanotube. Spectroscopy experiments point out the important role of dimensionality in this one dimensional object.
A first-principles investigation of the electronic properties of boron nitride nanoribbons (BNNRs) having either armchair or zigzag shaped edges passivated by hydrogen with widths up to 10 nm is presented. Band gaps of armchair BNNRs exhibit family-dependent oscillations as the width increases and, for ribbons wider than 3 nm, converge to a constant value that is 0.02 eV smaller than the bulk band gap of a boron nitride sheet owing to the existence of very weak edge states. The band gap of zigzag BNNRs monotonically decreases and converges to a gap that is 0.7 eV smaller than the bulk gap due …
A comparison between experimental and theoretical electron Energy Loss Near Edge Structure (ELNES) of B and N K-edges in cubic boron nitride is presented. The electron energy loss spectra of cubic boron nitride particles were measured using a scanning transmission electron microscope. The theoretical calculation of the ELNES was performed within the framework of density functional theory including single particle core-hole effects. It is found that experimental and calculated ELNES of both the B and N K-edges in cubic boron nitride show excellent agreement.
We present the successful synthesis of single-atom-thick borophene nanoribbons (BNRs) by self-assembly of boron on Ag(110) surface. The scanning tunneling microscopy (STM) studies reveal high quality BNRs: all the ribbons are along the [-110] direction of Ag(110), and can run across the steps on the surface. The width of ribbons is distributed in a narrow range around 10.3 nm. High resolution STM images revealed four ordered surface structures in BNRs. Combined with DFT calculations, we found that all the four structures of boron nanoribbons consist of the boron chains with different width, se…
Recently hybridized monolayers consisting of hexagonal boron nitride (h-BN) phases inside graphene layer have been synthesized and shown to be an effective way of opening band gap in graphene monolayers [1]. In this letter, we report an ab initio density functional theory (DFT)- based study of h-BN domain size effect on the elastic properties of graphene/boron nitride hybrid monolayers (h-BNC). We found both inplane stiffness and longitudinal sound velocity of h-BNC linearly decrease with h-BN concentration.
We report on the measurement of the effective radial modulus of multiwalled Boron Nitride nanotubes with external radii in the range 3.7 to 36 nm and number of layers in between 5 and 48. These Boron Nitride nanotubes are radially much stiffer than previously reported thinner and smaller Boron Nitride nanotubes. Here, we show the key role of the morphology of the nanotubes in determining their radial rigidity, in particular we find that the external and internal radii, R_ext and R_int, have a stronger influence on the radial modulus than the NT's thickness, t. We find that the effective radial…
We perform density functional calculations on one-dimensional zigzag edge graphene nano-ribbons (ZGNRs) of different widths, with and without edge doping including semi-local exchange-correlations. Our study reveals that, although the ground state of edge passivated (with hydrogen) ZGNRs prefers to be anti-ferromagnetic, the doping of both the edges with Boron atoms stabilizes the system in a ferromagnetic ground state. Both the local and semi-local exchange-correlations result in half-metallicity in edge passivated ZGNRs at a finite cross-ribbon electric field. However, the ZGNR with Boron ed…
Nanostructure and mechanical properties of bulk nanocristalline cubic boron nitride have been studied by transmission electron microscopy, and micro- and nanoindentation. The obtained data on hardness, elastic properties and fracture toughness clearly indicate that nano-cBN belongs to a family of advanced ultra-hard materials.
This study of elastic and plastic deformation of graphene, silicene, and boron nitride (BN) honeycomb nanoribbons under uniaxial tension determines their elastic constants and reveals interesting features. In the course of stretching in the elastic range, the electronic and magnetic properties can be strongly modified. In particular, it is shown that the band gap of a specific armchair nanoribbon is closed under strain and highest valance and lowest conduction bands are linearized. This way, the massless Dirac fermion behavior can be attained even in a semiconducting nanoribbon. Under plastic …
We represent the results of quantum chemical calculations of boron nitride nanotubes intercalated by alkali and alkali-earth metall atoms and its ions. It was obtained that unpair spins were localized on seperated metal atoms. So we propose to construct the two-qubit cells on the basis of infilled boron nitride nanotubes for the quantum computer.
Systematic ab initio calculations show that the energy gap of boron nitride (BN) nanoribbons (BNNRs) with zigzag or armchair edges can be significantly reduced by a transverse electric field and completely closed at a critical field which decreases with increasing ribbon width. In addition, a distinct gap modulation in the ribbons with zigzag edges is presented when a reversed electric field is applied. In a weak field, the gap reduction of the BNNRs with zigzag edges originates from the field-induced energy level shifts of the spatially separated edge-states, while the gap reduction of the BN…
Despite a recent flurry of experimental and simulation studies, an accurate estimate of the interaction strength of water molecules with hexagonal boron nitride is lacking. Here we report quantum Monte Carlo results for the adsorption of a water monomer on a periodic hexagonal boron nitride sheet, which yield a water monomer interaction energy of -84 +/- 5 meV. We use the results to evaluate the performance of several widely used density functional theory (DFT) exchange correlation functionals, and find that they all deviate substantially. Differences in interaction energies between different …
Lateral heterostructures of two-dimensional materials may exhibit various intriguing emergent properties. Yet when specified to the orientationally aligned heterojunctions of zigzag graphene and hexagonal boron nitride (hBN) nanoribbons, realizations of the high expectations on their properties encounter two standing hurtles. First, the rapid accumulation of strain energy prevents large- scale fabrication. Secondly, the pronounced half-metallicity predicted for freestanding graphene nanoribbons is severely suppressed. By properly tailoring orientational misalignment between zigzag graphene and…
Using combination of Density Functional Theory and Monte Carlo simulation, we study the phase stability and electronic properties of two dimensional hexagonal composites of boron nitride and graphene, with a goal to uncover the role of the interface geometry formed between the two. Our study highlights that preferential creation of extended armchair interfaces may facilitate formation of solid solution of boron nitride and graphene within a certain temperature range. We further find that for band-gap engineering, armchair interfaces or patchy interfaces with mixed geometry are most suitable. E…
The defect-mediated hexagonal boron nitride (hBN) supercell display the visible optical spectra and electronic characteristics. The defects in the hBN supercell include the atomic vacancy, antisite, antisite vacancy, and substitution of a foreign atom for boron or nitrogen. The hBN supercell with VB, CB, and NB-VN has the high electron density of states across the Fermi level which indicates the high conductive electronic characteristics. The hBN with defects including atomic vacancy, antisite vacancy, and substitution of a foreign atom for boron or nitride exhibit the distinct spin-resolved o…
The structural similarity between hexagonal boron nitride (h-BN) and graphene nanoribbons allows for the formation of heterojunctions with small chain stress. The combination of the insulation nature of the former and the quasi-metallic property of the latter makes this kind of heterostructure particularly interesting for flat optoelectronics. Recently, it was experimentally demonstrated that the shapes of the graphene and h-BN domains can be controlled precisely, and sharp graphene/h-BN interfaces can be created. Here, we investigated the electronic and structural properties of graphene (h-BN…
The phonon dispersion, density of states, Grüneisen parameters, and the lattice thermal conductivity of single- and multi-layered boron nitride were calculated using first-principles methods. For the bulk {\it h}-BN we also report the two-phonon density of states. We also present simple analytical solutions to the acoustic vibrational mode-dependent lattice thermal conductivity. Moreover, computations based on the elaborate Callaway-Klemens and the real space super cell methods are presented to calculate the sample length and temperature dependent lattice thermal conductivity of single- and mu…
Presence of flat bands and edge states at the Fermi level in graphene nanoribbons with zigzag edges is one of the most interesting and attracting properties of nanocarbon materials but it is believed that they are quite fragile states and disappear when B and N atoms are doped at around the edges. In this paper, we theoretically investigate electronic and magnetic properties of boron-carbon-nitride (BCN) nanoribbons with zigzag edges where the outermost C atoms on the edges are alternately replaced with B and N atoms using the first principles calculations. We show that BCN nanoribbons have th…
Monolayer of hexagonal boron nitride (h-BN), commonly known as "white graphene" is a promising wide bandgap semiconducting material for deep-ultaviolet optoelectronic devices. In this report, the light absorption of a single layer hexagonal boron nitride is calculated using a tight-binding Hamiltonian. The absorption is found to be monotonically decreasing function of photon energy compared to graphene where absorption coefficient is independent of photon energy and characterized by the effective fine-structure constant.
The sputtering of hexagonal boron nitride due to low energy xenon ion bombardments occurs in various applications including fabrication of cubic boron nitride and erosion of Hall thruster channel walls. At low ion energies, accurate experimental characterization of sputter yields increases in difficulty due to the low yields involved. A molecular dynamics model is employed to simulate the sputtering process and to calculate sputter yields for ion energies ranging from 10 eV to 350 eV. The results are compared to experimental data and a semi-empirical expression developed by Bohdansky is found …
Ab initio calculations of the spontaneous polarization and piezoelectric properties of boron nitride nanotubes show that they are excellent piezoelectric systems with response values larger than those of piezoelectric polymers. The intrinsic chiral symmetry of the nanotubes induces an exact cancellation of the total spontaneous polarization in ideal, isolated nanotubes of arbitrary indices. Breaking of this symmetry by inter-tube interaction or elastic deformations induces spontaneous polarization comparable to those of wurtzite semiconductors.
Two dimensional van der Waals crystals and their heterostructures provide an exciting alternative to bulk wide bandgap semiconductors as hosts of single photon emitters. Amongst different layered materials, bright and robust defect-based single photon emitters have been observed within hexagonal boron nitride, a layered wide-bandgap semiconductor. Despite research efforts to date, the identities of the deep defects responsible for quantum emissions in hexagonal boron nitride remain unknown. In this theoretical work, I demonstrate that the strain-induced changes in emission frequencies depend o…
In the present work we discuss based on extensive fully atomistic molecular dynamics simulations the dynamics of Neon atoms oscillating inside (5,5)single-walled carbon nanotubes (CNTs) and boron-nitride (BNNT) ones. Our results show that sustained high frequency oscillatory regimes are possible for a large range of temperatures. Our results also show that the general features of the oscillations are quite similar to CNT and BNNT, in contrast with some speculations in previous work literature about the importance of broken symmetry and chirality exhibited by BNNTs.
The dispersion of nitride and carbide ceramic particles in water is difficult, due to the absence of hydroxyl groups on their surface. Boron nitride is not an exception and despite its numerous applications, no effective dispersant has been identified so far. We demonstrate here the dispersion properties of two cellulose derivatives for hexagonal boron nitride powders, hydroxyl ethyl cellulose and methyl cellulose. The effect of particle sizes and cellulose concentration was investigated. The adsorption of cellulose onto the surface of the BN particles was confirmed by isotherm adsorption. Zet…
The effects of edge chemistry on the relative stability and electronic properties of zigzag boron nitride nanoribbons (ZBNNRs) are investigated. Among all functional groups considered, fully hydroxylated ZBNNRs are found to be the most energetically stable. When an in-plane external electric field is applied perpendicular to the axis of both hydrogenated and hydroxylated ZBNNRs, a spin-polarized half-metallic state is induced, whose character is different than that predicted for ZGNRs. The onset field for achieving the half-metallic state is found to mainly depend on the width of the ribbon. O…
The influence of triaxial in-plane strain on the electronic properties of a hexagonal boron-nitride sheet is investigated using density functional theory. Different from graphene, the triaxial strain localizes the molecular orbitals of the boron-nitride flake in its center depending on the direction of the applied strain. The proposed technique for localizing the molecular orbitals that are close to the Fermi level in the center of boron nitride flakes can be used to actualize engineered nanosensors, for instance, to selectively detect gas molecules. We show that the central part of the strain…
Graphene nanoribbons (GNRs) are ultra-narrow strips of graphene that have the potential to be used in high-performance graphene-based semiconductor electronics. However, controlled growth of GNRs on dielectric substrates remains a challenge. Here, we report the successful growth of GNRs directly on hexagonal boron nitride substrates with smooth edges and controllable widths using chemical vapour deposition. The approach is based on a type of template growth that allows for the in-plane epitaxy of mono-layered GNRs in nano-trenches on hexagonal boron nitride with edges following a zigzag direct…
We study silicene on hexagonal boron nitride, using first principles calculations. Since hexagonal boron nitride is semiconducting, the interaction with silicene is weaker than for metallic substrates. It therefore is possible to open a 50 meV band gap in the silicene. We further address the effect of Mn decoration by determining the onsite Hubbard interaction parameter, which turns out to differ significantly for decoration at the top and hollow sites. The induced magnetism in the system is analyzed in detail.
In this work we show, by means of a density functional theory formalism, that the simple physical contact between hydrogen terminated boron nitride surfaces gives rise to a metallic interface with free carries of opposite sign at each surface. A band gap can be induced by applying uniaxial pressure. The size of the band gap changes continuously from zero up to 4.4 eV with increasing pressure, which is understood in terms of the interaction between surface states. Due to the high thermal conductivity of cubic boron nitride and the coupling between band gap and applied pressure, such tunable ban…
Many quantum emitters have been measured close or near the grain boundaries of the two-dimensional hexagonal boron nitride where various Stone-Wales defects appear. We show by means of first principles density functional theory calculations that the pentagon-heptagon Stone-Wales defect is an ultraviolet emitter and its optical properties closely follow the characteristics of a 4.08-eV quantum emitter often observed in polycrystalline hexagonal boron nitride. We also show that the square-octagon Stone-Wales line defects are optically active in the ultraviolet region with varying gaps depending …
Covalent functionalization is a way to tune the electrochemical properties of hexagonal boron nitride (h-BN) monolayers. The wide band gap insulator h-BN may become metallic conductor upon functionalization with strong oxidants, such as fluorosulfonyl radicals ($\cdot$OSO$_2$F), as known since 1978 [N. Bartlett et al., J. Chem. Soc. Chem. Comm. {\bf 5}, 200 (1978)], with electrical conductivity of 1.5 S/cm [C. Shen et al., J. Solid State Chem. {\bf 147}, 74 (1999)] that greatly surpasses commercial cathode material Li$_{x}$CoO$_{2}$ while retaining excellent ionic conductivity. Functionalized …
Topological insulators hold great potential for efficient information processing and storage. Using density functional theory calculations, we predict that a honeycomb lead monolayer can be stabilized on the Al2O3 (0001) substrate and becomes topologically non-trivial with a sizeable band gap (~0.27 eV). Furthermore, we propose to use hexagonal boron-nitride (h-BN) monolayer as a protection for the topological states of Pb/Al2O3 and Sn/Al2O3. Our findings suggest new possibilities for designing and protecting two-dimensional TIs for practical applications.
Using the minima hopping global geometry optimization method on the density functional potential energy surface we study medium size and large boron clusters. Even though for isolated medium size clusters the ground state is a cage like structure they are unstable against external perturbations such as contact with other clusters. The energy landscape of larger boron clusters is glass like and has a large number of structures which are lower in energy than the cages. This is in contrast to carbon and boron nitride systems which can be clearly identified as structure seekers in our minima hoppi…
Carbon nanoscrolls (CNSs) are structures formed by rolling up graphene layers into a papyruslike shape. CNNs have been experimentally produced by different groups. Boron nitride nanoscrolls (BNNSs) are similar structures using boron nitride instead of graphene layers. In this work we report molecular mechanics and molecular dynamics results for the structural and dynamical aspects of BNNS formation. Similarly to CNS, BNNS formation is dominated by two major energy contributions, the increase in the elastic energy and the energetic gain due to van der Waals interactions of the overlapping surfa…
We present an ab-initio study of boron nitride as well as carbon allotropes. Their relative thermodynamic stabilities and structural phase transitions from low- to high-density phases are investigated. Pressure-temperature phase diagrams are calculated and compared to experimental findings. The calculations are performed using quantum chemical wavefunction based as well as density functional theories. Our findings reveal that predicted energy differences often depend significantly on the choice of the employed method. Comparison between calculated and experimental results allows for benchmarki…
The excitonic recombinations in hexagonal boron nitride (hBN) are investigated with spatially resolved cathodoluminescence spectroscopy in the UV range. Cathodoluminescence images of an individual hBN crystallite reveals that the 215 nm free excitonic line is quite homogeneously emitted along the crystallite whereas the 220 nm and 227 nm excitonic emissions are located in specific regions of the crystallite. Transmission electron microscopy images show that these regions contain a high density of crystalline defects. This suggests that both the 220 nm and 227 nm emissions are produced by the r…
The interlayer sliding energy landscape of hexagonal boron nitride (h-BN) is investigated via a van der Waals corrected density functional theory approach. It is found that the main role of the van der Waals forces is to "anchor" the layers at a fixed distance, whereas the electrostatic forces dictate the optimal stacking mode and the interlayer sliding energy. A nearly free-sliding path is identified, along which bandgap modulations of ~0.6 eV are obtained. We propose a simple geometrical model that quantifies the registry matching between the layers and captures the essence of the corrugated…
First-principles spin-polarized calculations have been performed on passivated Boron-Nitride Nanoribbons (BNNRs) with pentagon-heptagon line-defects (PHLDs) (also called as Stone-Wales line-defects). Two kinds of PHLDs, namely, even-line and odd-line PHLDs, have been added either at one edge or at both edges of BNNRs. Single-edge (with all its different possibilities, for example, for a BNNR with 2-line PHLD at single-edge there are 8 possibilities) as well as both-edge passivations have been considered for all the ribbons in this study by passivating each edge atom with hydrogen atom. Density…
We have carried out first-principles calculations on electronic properties of graphene quantum dots embedded in hexagonal boron nitride monolayer sheets. The calculations with density functional theory show that the band gaps of quantum dots are determined by the quantum confinement effects and the hybridization of π orbitals from B, N and C atoms. The energy states near the Fermi level are found to be strongly localized within and in the vicinity of the quantum dots.
The stability of atomic intercalated boron nitride K4 crystal structures, XBN (X=H, Li, Be, B, C, N, O, F, Na, Mg, Al, Si, P, S, Cl, K, Ca, Ga, Ge, As, Se, Br, Rb or Sr) is evaluated by the geometric optimization and frozen phonon calculations based on the first principles calculations. NaBN, MgBN, GaBN, FBN and ClBN are found to be stable. NaBN, GaBN, FBN and ClBN are metallic, whereas MgBN is semiconducting.
We find, with the use of first-principles calculations, that a single-atom-thick boron-nitride (BN) sheet exhibits an unusual nonlinear electromechanical effect: it becomes macroscopically polarized when bent out-of-plane. The direction of the induced polarization is in the plane of the film and it depends non-analitically on the corrugation wave vector k. The magnitude of the polarization can reach very high values in spite of being at least quadratic in atomic displacements due to BN sheets being able to tolerate large mechanical strains. The discovered effect can find many applications, in …
Novel materials with tunable magnetic states play a significant role in the development of next-generation spintronic devices. In this paper, we examine the role of biaxial strain on the electronic properties of vacancy-decorated hexagonal boron nitride (h-BN) monolayers using density functional theory calculations. We found that the strain can lead to switching of the magnetic state for h-BN monolayers with boron vacancy or divacancy. Our findings promise a new route for the operation of low-dimensional spintronic devices.
