We investigate the relation between the girth and the guaranteed error correction capability of $γ$-left regular LDPC codes when decoded using the bit flipping (serial and parallel) algorithms. A lower bound on the number of variable nodes which expand by a factor of at least $3 γ/4$ is found based on the Moore bound. An upper bound on the guaranteed correction capability is established by studying the sizes of smallest possible trapping sets.
The relation between the girth and the guaranteed error correction capability of $γ$-left regular LDPC codes when decoded using the bit flipping (serial and parallel) algorithms is investigated. A lower bound on the size of variable node sets which expand by a factor of at least $3 γ/4$ is found based on the Moore bound. An upper bound on the guaranteed error correction capability is established by studying the sizes of smallest possible trapping sets. The results are extended to generalized LDPC codes. It is shown that generalized LDPC codes can correct a linear fraction of errors under the p…
Recently, we introduced a new class of finite alphabet iterative decoders (FAIDs) for low-density parity-check (LDPC) codes. These decoders are capable of surpassing belief propagation in the error floor region on the Binary Symmetric channel with much lower complexity. In this paper, we introduce a a novel scheme to further increase the guaranteed error correction capability from what is achievable by a FAID on column-weight-three LDPC codes. The proposed scheme uses a plurality of FAIDs which collectively correct more error patterns than a single FAID on a given code. The collection of FAIDs…
The relation between the girth and the error correction capability of column-weight-three LDPC codes is investigated. Specifically, it is shown that the Gallager A algorithm can correct $g/2-1$ errors in $g/2$ iterations on a Tanner graph of girth $g \geq 10$.
We present a method for estimating the undetected error rate when a cyclic redundancy check (CRC) is performed on the output of the decoder of short low-density parity-check (LDPC) codes. This system is of interest for telecommand links, where new LDPC codes have been designed for updating the current standard. We show that these new LDPC codes combined with CRC are adequate for complying with the stringent requirements of this kind of transmissions in terms of error detection.
In this paper, we investigate the error correction capability of column-weight-three LDPC codes when decoded using the Gallager A algorithm. We prove that the necessary condition for a code to correct $k \geq 5$ errors is to avoid cycles of length up to $2k$ in its Tanner graph. As a consequence of this result, we show that given any $α>0, \exists N $ such that $\forall n>N$, no code in the ensemble of column-weight-three codes can correct all $αn$ or fewer errors. We extend these results to the bit flipping algorithm.
For an arbitrary (3,L) QC-LDPC code with a girth of twelve, a tight lower bound of the consecutive lengths is proposed. For an arbitrary length above the bound the resultant code necessarily has a girth of twelve, and for the length meeting the bound, the corresponding code inevitably has a girth smaller than twelve. The conclusion can play an important role in the proofs of the existence of large-girth QC-LDPC codes, the construction of large-girth QC-LDPC codes based on the Chinese remainder theorem, and the construction of LDPC codes with the guaranteed error correction capability.
Irregular low-density parity check (LDPC) codes are particularly well-suited for transmission schemes that require unequal error protection (UEP) of the transmitted data due to the different connection degrees of its variable nodes. However, this UEP capability is strongly dependent on the connection profile among the protection classes. This paper applies a multi-edge type analysis of LDPC codes for optimizing such connection profile according to the performance requirements of each protection class. This allows the construction of UEP-LDPC codes where the difference between the performance o…
In this paper, we focus on decoding nonbinary low-density parity-check (LDPC) codes in Galois fields of characteristic two via the proximal alternating direction method of multipliers (proximal-ADMM). By exploiting Flanagan/Constant-Weighting embedding techniques and the decomposition technique based on three-variables parity-check equations, two efficient proximal-ADMM decoders for nonbinary LDPC codes are proposed. We show that both of them are theoretically guaranteed convergent to some stationary point of the decoding model and either of their computational complexities in each proximal-AD…
This paper presents a theoretical study of a new type of LDPC codes motivated by practical storage applications. LDPCL codes (suffix L represents locality) are LDPC codes that can be decoded either as usual over the full code block, or locally when a smaller sub-block is accessed (to reduce latency). LDPCL codes are designed to maximize the error-correction performance vs. rate in the usual (global) mode, while at the same time providing a certain performance in the local mode. We develop a theoretical framework for the design of LDPCL codes. Our results include a design tool to construct an L…
Iterative decoders used for decoding low-density parity-check (LDPC) and moderate-density parity-check (MDPC) codes are not characterized by a deterministic decoding radius and their error rate performance is usually assessed through intensive Monte Carlo simulations. However, several applications, like code-based cryptography, need guaranteed low values of the error rate, which are infeasible to assess through simulations, thus requiring the development of theoretical models for the error rate of these codes under iterative decoding. Some models of this type already exist, but become computat…
In this paper, we propose a new approach to construct a class of check-hybrid generalized low-density parity-check (CH-GLDPC) codes which are free of small trapping sets. The approach is based on converting some selected check nodes involving a trapping set into super checks corresponding to a 2-error correcting component code. Specifically, we follow two main purposes to construct the check-hybrid codes; first, based on the knowledge of the trapping sets of the global LDPC code, single parity checks are replaced by super checks to disable the trapping sets. We show that by converting specifie…
Leafless elementary trapping sets (LETSs) are known to be the problematic structures in the error floor region of low-density parity-check (LDPC) codes over the additive white Gaussian (AWGN) channel under iterative decoding algorithms. While problems involving the general category of trapping sets, and the subcategory of elementary trapping sets (ETSs), have been shown to be NP-hard, similar results for LETSs, which are a subset of ETSs are not available. In this paper, we prove that, for a general LDPC code, finding a LETS of a given size a with minimum number of unsatisfied check nodes b is…
Quasi-cyclic low-density parity-check (QC-LDPC) codes based on protographs are of great interest to code designers because analysis and implementation are facilitated by the protograph structure and the use of circulant permutation matrices for protograph lifting. However, these restrictions impose undesirable fixed upper limits on important code parameters, such as minimum distance and girth. In this paper, we consider an approach to constructing QC-LDPC codes that uses a two-step lifting procedure based on a protograph, and, by following this method instead of the usual one-step procedure, w…
In this paper, we propose a new class of bit flipping algorithms for low-density parity-check (LDPC) codes over the binary symmetric channel (BSC). Compared to the regular (parallel or serial) bit flipping algorithms, the proposed algorithms employ one additional bit at a variable node to represent its "strength." The introduction of this additional bit increases the guaranteed error correction capability by a factor of at least 2. An additional bit can also be employed at a check node to capture information which is beneficial to decoding. A framework for failure analysis of the proposed algo…
Assuming iterative decoding for binary erasure channels (BECs), a novel tree-based technique for upper bounding the bit error rates (BERs) of arbitrary, finite low-density parity-check (LDPC) codes is provided and the resulting bound can be evaluated for all operating erasure probabilities, including both the waterfall and the error floor regions. This upper bound can also be viewed as a narrowing search of stopping sets, which is an approach different from the stopping set enumeration used for lower bounding the error floor. When combined with optimal leaf-finding modules, this upper bound is…
In this paper, we study the graphical structure of elementary trapping sets (ETS) of variable-regular low-density parity-check (LDPC) codes. ETSs are known to be the main cause of error floor in LDPC coding schemes. For the set of LDPC codes with a given variable node degree $d_l$ and girth $g$, we identify all the non-isomorphic structures of an arbitrary class of $(a,b)$ ETSs, where $a$ is the number of variable nodes and $b$ is the number of odd-degree check nodes in the induced subgraph of the ETS. Our study leads to a simple characterization of dominant classes of ETSs (those with relativ…
This paper outlines a three-step procedure for determining the low bit error rate performance curve of a wide class of LDPC codes of moderate length. The traditional method to estimate code performance in the higher SNR region is to use a sum of the contributions of the most dominant error events to the probability of error. These dominant error events will be both code and decoder dependent, consisting of low-weight codewords as well as non-codeword events if ML decoding is not used. For even moderate length codes, it is not feasible to find all of these dominant error events with a brute for…
Let H(D) be the parity-check matrix of an LDPC convolutional code corresponding to the parity-check matrix H of a QC code obtained using the method of Tanner et al. We see that the entries in H(D) are all monomials and several rows (columns) have monomial factors. Let us cyclically shift the rows of H. Then the parity-check matrix H'(D) corresponding to the modified matrix H' defines another convolutional code. However, its free distance is lower-bounded by the minimum distance of the original QC code. Also, each row (column) of H'(D) has a factor different from the one in H(D). We show that t…
Joint encryption-encoding schemes have been released to fulfill both reliability and security desires in a single step. Using Low Density Parity Check (LDPC) codes in joint encryption-encoding schemes, as an alternative to classical linear codes, would shorten the key size as well as improving error correction capability. In this article, we present a joint encryption-encoding scheme using Quasi Cyclic-Low Density Parity Check (QC-LDPC) codes based on finite geometry. We observed that our proposed scheme not only outperforms its predecessors in key size and transmission rate, but also remains …
It is well known that spatially coupled (SC) codes with erasure-BP decoding have powerful error correcting capability over memoryless erasure channels. However, the decoding performance of SC-codes significantly degrades when they are used over burst erasure channels. In this paper, we propose band splitting permutations (BSP) suitable for $(l,r,L)$ SC-codes. The BSP splits a diagonal band in a base matrix into multiple bands in order to enhance the span of the stopping sets in the base matrix. As theoretical performance guarantees, lower and upper bounds on the maximal burst correctable lengt…
A class of doubly-generalized low-density parity-check (D-GLDPC) codes, where single parity-check (SPC) codes are used as variable nodes (VNs), is investigated. An expression for the growth rate of the weight distribution of any D-GLDPC ensemble with a uniform check node (CN) set is presented at first, together with an analytical technique for its efficient evaluation. These tools are then used for detailed analysis of a case study, namely, a rate-1/2 D-GLDPC ensemble where all the CNs are (7,4) Hamming codes and all the VNs are length-7 SPC codes. It is illustrated how the VN representations …
In a digital communication system, information is sent from one place to another over a noisy communication channel using binary symbols (bits). Original information is encoded by adding redundant bits, which are then used by low--density parity--check (LDPC) codes to detect and correct errors that may have been introduced during transmission. Error correction capability of an LDPC code is severely degraded due to harmful structures such as small cycles in its bipartite graph representation known as Tanner graph (TG). We introduce an integer programming formulation to generate a TG for a given…
Nonbinary LDPC codes have shown superior performance close to the Shannon limit. Compared to binary LDPC codes of similar lengths, they can reach orders of magnitudes lower error rate. However, multitude of design freedoms of nonbinary LDPC codes complicates the practical code and decoder design process. Fast simulations are critically important to evaluate the pros and cons. Rapid prototyping on FPGA is attractive but takes significant design efforts due to its high design complexity. We propose a high-throughput reconfigurable hardware emulation architecture with decoder and peripheral co-de…
This paper presents new FEC codes for the erasure channel, LDPC-Band, that have been designed so as to optimize a hybrid iterative-Maximum Likelihood (ML) decoding. Indeed, these codes feature simultaneously a sparse parity check matrix, which allows an efficient use of iterative LDPC decoding, and a generator matrix with a band structure, which allows fast ML decoding on the erasure channel. The combination of these two decoding algorithms leads to erasure codes achieving a very good trade-off between complexity and erasure correction capability.
In a digital communication system, information is sent from one place to another over a noisy communication channel. It may be possible to detect and correct errors that occur during the transmission if one encodes the original information by adding redundant bits. Low-density parity-check (LDPC) convolutional codes, a member of the LDPC code family, encode the original information to improve error correction capability. In practice these codes are used to decode very long information sequences, where the information arrives in subsequent packets over time, such as video streams. We consider t…
It is proved in this work that exhaustively determining bad patterns in arbitrary, finite low-density parity-check (LDPC) codes, including stopping sets for binary erasure channels (BECs) and trapping sets (also known as near-codewords) for general memoryless symmetric channels, is an NP-complete problem, and efficient algorithms are provided for codes of practical short lengths n~=500. By exploiting the sparse connectivity of LDPC codes, the stopping sets of size <=13 and the trapping sets of size <=11 can be efficiently exhaustively determined for the first time, and the resulting exhaustive…
Distributed storage systems suffer from significant repair traffic generated due to frequent storage node failures. This paper shows that properly designed low-density parity-check (LDPC) codes can substantially reduce the amount of required block downloads for repair thanks to the sparse nature of their factor graph representation. In particular, with a careful construction of the factor graph, both low repair-bandwidth and high reliability can be achieved for a given code rate. First, a formula for the average repair bandwidth of LDPC codes is developed. This formula is then used to establis…
We initiate the probabilistic analysis of linear programming (LP) decoding of low-density parity-check (LDPC) codes. Specifically, we show that for a random LDPC code ensemble, the linear programming decoder of Feldman et al. succeeds in correcting a constant fraction of errors with high probability. The fraction of correctable errors guaranteed by our analysis surpasses previous non-asymptotic results for LDPC codes, and in particular exceeds the best previous finite-length result on LP decoding by a factor greater than ten. This improvement stems in part from our analysis of probabilistic bi…
Finite alphabet iterative decoders (FAIDs) for LDPC codes were recently shown to be capable of surpassing the Belief Propagation (BP) decoder in the error floor region on the Binary Symmetric channel (BSC). More recently, the technique of decimation which involves fixing the values of certain bits during decoding, was proposed for FAIDs in order to make them more amenable to analysis while maintaining their good performance. In this paper, we show how decimation can be used adaptively to further enhance the guaranteed error correction capability of FAIDs that are already good on a given code. …
This paper constructs WOM codes that combine rewriting and error correction for mitigating the reliability and the endurance problems in flash memory. We consider a rewriting model that is of practical interest to flash applications where only the second write uses WOM codes. Our WOM code construction is based on binary erasure quantization with LDGM codes, where the rewriting uses message passing and has potential to share the efficient hardware implementations with LDPC codes in practice. We show that the coding scheme achieves the capacity of the rewriting model. Extensive simulations show …
The universal secure network coding presented by Silva et al. realizes secure and reliable transmission of a secret message over any underlying network code, by using maximum rank distance codes. Inspired by their result, this paper considers the secure network coding based on arbitrary linear codes, and investigates its security performance and error correction capability that are guaranteed independently of the underlying network code. The security performance and error correction capability are said to be universal when they are independent of underlying network codes. This paper introduces…
