The influence of controlled vibrations on the granular rheology is investigated in a specifically designed experiment. We study experimentally a thin granular film spreading under the action of horizontal vibrations. A nonlinear diffusion equation is derived theoretically that describes the evolution of the deposit shape. A self-similar parabolic shape (the``granular droplet'') and a spreading dynamics are predicted that both agree quantitatively with the experimental results. The theoretical analysis is used to extract effective dynamic friction coefficients between the base and the granular layer under sustained and controlled vibrations. We derive an empirical friction law involving external driving parameters and the layer height to represent our data.
We report a novel surface-tension driven instability observed for droplets spreading on a compliant substrate. When a droplet is released on the surface of an agar gel, it forms arms/cracks when the ratio of surface tension gradient to gel strength is sufficiently large. We explore a range of gel strengths and droplet surface tensions and find that the onset of the instability and the number of arms depend on the ratio of surface tension to gel strength. However, the arm length grows with an apparently universal law L ~ t^{3/4}.
We use a three-dimensional lattice Boltzmann model to investigate the spreading of mesoscale droplets on homogeneous and heterogeneous surfaces. On a homogeneous substrate the base radius of the droplet grows with time as $t^{0.28}$ for a range of viscosities and surface tensions. The time evolutions collapse onto a single curve as a function of a dimensionless time. On a surface comprising of alternate hydrophobic and hydrophilic stripes the wetting velocity is anisotropic and the equilibrium shape of the droplet reflects the wetting properties of the underlying substrate.
Recently, the existence of so-called granular bubbles and droplets has been demonstrated experimentally. Granular bubbles and droplets are clusters of particles that respectively rise and sink if submerged in an aerated and vibrated bed of another granular material of different size and/or density. However, currently there is no model that explains the coherent motion of these clusters and predicts the transition between a rising and sinking motion. Here, we propose an analytical model predicting accurately the neutral buoyancy limit of a granular bubble/droplet. This model allows the compilat…
The spreading of polymer droplets is studied using molecular dynamics simulations. To study the dynamics of both the precursor foot and the bulk droplet, large drops of ~200,000 monomers are simulated using a bead-spring model for polymers of chain length 10, 20, and 40 monomers per chain. We compare spreading on flat and atomistic surfaces, chain length effects, and different applications of the Langevin and dissipative particle dynamics thermostats. We find diffusive behavior for the precursor foot and good agreement with the molecular kinetic model of droplet spreading using both flat and a…
The quasistationary spreading of a circular liquid drop on a solid substrate typically obeys the so-called Tanner law, with the instantaneous base radius R(t) growing with time as R ~ t^{1/10} -- an effect of the dominant role of capillary forces for a small-sized droplet. However, for droplets of nematic liquid crystals, a faster spreading law sets in at long times, so that R ~ t^alpha with alpha significantly larger than the Tanner exponent 1/10. In the framework of the thin film model (or lubrication approximation), we describe this "acceleration" as a transition to a qualitatively differen…
Nanoscale topographic features of solid surfaces can induce complex metastable behavior in colloidal and multiphase systems. Recent studies on single microparticle adsorption at liquid interfaces have reported a crossover from fast capillary driven dynamics to extremely slow kinetic regimes that can require up to several hours or days to attain thermodynamic equilibrium. The observed kinetic regime resembling physical ageing in glassy materials has been attributed to unobserved surface features with dimensions on the order of a few nanometers. In this work, we study the spontaneous spreading o…
The spreading of one- and two-component polymer nanodroplets is studied using molecular dynamics simulation in a cylindrical geometry. The droplets consist of polymer chains of length 10, 40, and 100 monomers per chain described by the bead-spring model spreading on a flat surface with a surface-coupled Langevin thermostat. Each droplet contains ~350,000 monomers. The dynamics of the individual components of each droplet are analyzed and compared to the dynamics of single component droplets for the spreading rates of the precursor foot and bulk croplet, the time evolution of the contact angle,…
The spreading of a cap-shaped spherical droplet of non-Newtonian power-law liquids on a completely wettable spherical substrate is theoretically studied. Both convex spherical substrates and concave spherical cavities with smooth or rough surfaces are considered. The droplet on a rough substrate is modeled by either the Wenzel or the Cassie-Baxter model. The two sources of driving force of spreading by the surface-tension and the line tension are considered. Also, the two channels of energy dissipation by the viscous dissipation within the bulk and the frictional dissipation at the contact lin…
The spreading under surface tension and gravity of a droplet of yield-stress fluid over a thin film of the same material is studied. The droplet converges to a final equilibrium shape once the driving stresses inside the droplet fall below the yield stress. Scaling laws are presented for the final radius and complemented with an asymptotic analysis for shallow droplets. Moreover, numerical simulations using the volume-of-fluid method and a regularized constitutive law, and experiments with an aqueous solution of Carbopol are presented.
The spreading of a cap-shaped spherical droplet on a completely wettable spherical substrate is studied. The non-equilibrium thermodynamic formulation is used to derive the thermodynamic driving force of spreading including the line-tension effect. Then the energy balance approach is adopted to derive the evolution equation of the spreading droplet. The time evolution of the contact angle $θ$ of a droplet obeys a power law $θ\sim t^{-α}$ with the exponent $α$, which is different from that derived from Tanner's law on a flat substrate. Furthermore, the line tension must be positive to promote c…
The spreading of a circular liquid drop on a solid substrate can be described by the time evolution of its base radius R(t). In complete wetting the quasistationary regime (far away from initial and final transients) typically obeys the so-called Tanner law, with R t^alpha_T, alpha_T=1/10. Late-time spreading may differ significantly from the Tanner law: in some cases the drop does not thin down to a molecular film and instead reaches an equilibrium pancake-like shape; in other situations, as revealed by recent experiments with spontaneously spreading nematic crystals, the growth of the base r…
When a droplet impacts a fabric mesh at a sufficiently high impact velocity, it not only spreads over the fabric but also penetrate its pores. To determine the influence of this liquid penetration of the fabric on droplet spreading on thin fabric meshes, we measured the droplet spreading ratio on fabric with and without an underlying substrate using a high-speed camera. For fabrics without a substrate, the droplet spreading ratio is reduced as the fabric penetration by the liquid reduces the droplet volume spreading on top of the fabric. Using entropic lattice Boltzmann simulations, we find th…
The complicated dynamics of the contact line of a moving droplet on a solid substrate often hamper the efficient modeling of microfluidic systems. In particular, the selection of the effective boundary conditions, specifying the contact line motion, is a controversial issue since the microscopic physics that gives rise to this displacement is still unknown. Here, a sharp interface, continuum-level, novel modeling approach, accounting for liquid/solid micro-scale interactions assembled in a disjoining pressure term, is presented. By following a unified conception (the model applies both to the …
The coarsening kinetics for the beading instability for liquid contained in a groove with convex curved sides (for example between a pair of parallel touching cylinders) is considered as an open channel flow problem. In contrast to a V-shaped wedge or U-shaped microchannel, it is argued that droplet coarsening takes place by viscous hydrodynamic transport through a stable column of liquid that coexists with the droplets in the groove at a slightly positive Laplace pressure. With some simplifying assumptions, this leads to a t^(1/7) growth law for the characteristic droplet size as a function o…
The spreading of a cap-shaped spherical droplet of non-Newtonian power-law liquids on a flat and a spherical rough and textured substrate is theoretically studied in the capillary-controlled spreading regime. A droplet whose scale is much larger than that of the roughness of substrate is considered. The equilibrium contact angle on a rough substrate is modeled by the Wenzel and the Cassie-Baxter model. Only the viscous energy dissipation within the droplet volume is considered, and that within the texture of substrate by imbibition is neglected. Then, the energy balance approach is adopted to …
We describe a setup to perform systematic studies on the spreading of droplets of complex fluids under microgravity conditions. Tweaking the gravitational acceleration under which droplets are deposited provides access to different regimes of the spreading dynamics, quantified through the Bond number. In particular, microgravity allows to form large droplets while remaining in the regime where surface tension effects and internal driving stresses are predominant over hydrostatic forces. The VIP-DROP2 experimental module provides a versatile platform to study a wide range of complex fluids thro…
The contact angle of a fluid droplet on an heterogeneous surface is analysed using the statistical dynamics of the spreading contact line. The statistical properties of the final droplet radius and contact angle are obtained through applications of depinning transitions of contact lines with non-local elasticity and features of pinning-depinning dynamics. Such properties not only depend on disorder strength and surface details, but also on the droplet volume and disorder correlation length. Deviations from Wenzel or Cassie/Baxter behaviour are particularly apparent in the case of small droplet…
The spreading of a cap-shaped spherical droplet of non-Newtonian power-law liquids, both shear-thinning and shear-thinning liquids, that completely wet a spherical substrate is theoretically investigated in the capillary-controlled spreading regime. The crater-shaped droplet model with the wedge-shaped meniscus near the three-phase contact line is used to calculate the viscous dissipation near the contact line. Then the energy balance approach is adopted to derive the equation which governs the evolution of the contact line. The time evolution of the dynamic contact angle $θ$ of a droplet obey…
We report an experimental investigation of spreading then shrinking of a surfactant droplet at the air-water interface with fingering instability appearing at the edge of the droplet stain. We find out that a droplet of a surfactant on the water shows three regimes of spreading, shrinking and resting at the appropriate parameters values. These regimes can be distinguished by measuring the mean square displacement of the droplet parts, fractal dimension of stain, or radius of fingerless part of the stain (to measure it, we define the angular box-counting dimension), versus time. The shrinking r…
Would a raindrop impacting on a coarse beach behave differently from that impacting on a desert of fine sand? We study this question by a series of model experiments, where the packing density of the granular target, the wettability of individual grains, the grain size, the impacting liquid, and the impact speed are varied. We find that by increasing the grain size and/or the wettability of individual grains the maximum droplet spreading undergoes a transition from a capillary regime towards a viscous regime, and splashing is suppressed. The liquid-grain mixing is discovered to be the underlyi…
We report on the spreading of triboelectrically charged glass particles on an oppositely charged surface of a plastic cylindrical container in the presence of a constant mechanical agitation. The particles spread via sticking, as a monolayer on the cylinder's surface. Continued agitation initiates a sequence of instabilities of this monolayer, which first forms periodic wavy-stripe-shaped transverse density modulation in the monolayer and then ejects narrow and long particle-jets from the tips of these stripes. These jets finally coalesce laterally to form a homogeneous spreading front that is…
When a droplet is brought in contact with an undercooled surface, it wets the substrate and solidifies at the same time. The interplay between the phase transition effects and the contact-line motion, leading to its arrest, remains poorly understood. Here we reveal the early solidification patterns and dynamics of spreading hexadecane droplets. Total internal reflection (TIR) imaging is employed to temporally and spatially resolve the early solidification behaviour. With this, we determine the conditions leading to the contact-line arrest. We quantify the overall nucleation behaviour, \textit{…
The surfactant-driven spreading of droplets is an essential process in many applications ranging from coating flow technology to enhanced oil recovery. Despite the significant advancement in describing spreading processes in surfactant-laden droplets, including the exciting phenomena of superspreading, many features of the underlying mechanisms require further understanding. Here, we have carried out molecular dynamics simulations of a coarse-grained model with a force-field obtained from the statistical associating fluid theory to study droplets laden with common and superspreading surfactant…
We present results on the leveling of polymer microdroplets on thin films prepared from the same material. In particular, we explore the crossover from a droplet spreading on an infinitesimally thin film (Tanner's law regime) to that of a droplet leveling on a film thicker than the droplet itself. In both regimes, the droplet's excess surface area decreases towards the equilibrium configuration of a flat liquid film, but with a different power law in time. Additionally, the characteristic leveling time depends on molecular properties, the size of the droplet, and the thickness of the underlyin…
Even though electrowetting-on-dielectric (EWOD) is a useful strategy in a wide array of biological and engineering processes with numerous droplet-manipulation applications, there is still a lack of complete theoretical interpretation on the dynamics of electrowetting. In this paper, we present an effective theoretical model and use Onsager variational principle to successfully derive the governing equations of non-equilibrium electrowetting dynamics for a droplet in both overdamped and underdamped regimes. It is found that the spreading and retraction dynamics of a droplet on EWOD substrates …
Even a small fraction of nanoparticles in fluids affects the splashing behavior of a droplet upon impact on a smooth surface. Nanofluid drop impact onto a smooth sapphire substrate is experimentally investigated over wide ranges of Reynolds ($10^2<\mathrm{Re}<10^4$) and Weber ($50<\mathrm{We}<500$) numbers for three nanofluid mass concentrations (0.01%, 0.1%, 1%) using high-speed photography. Nanofluids are prepared by diluting a commercial Al$_2$O$_3$-water nanofluid in aqueous glycerol solutions without dispersants. In total, 30 samples are prepared and 1799 data points are acquired. Every s…
The early stages of sintering of highly viscous droplets are very similar to the early stages of a viscous droplet spreading on a solid substrate. The flows in both problems are closely analogous to the displacements in a Hertzian elastic contact. We exploit that analogy to provide both a scaling argument and a calculation for the early growth of the contact radius $a$ with time, namely $a=(3 πγR^2 t/(32 η))^{1/3}$. (This result is complementary to the well-known Tanner law for spreading, $a \sim t^{1/10}$, which holds in the regime of low contact angles.) For viscoelastic fluids, the linear s…
We study spreading dynamics of nematic liquid crystal droplets within the framework of the long-wave approximation. A fourth order nonlinear parabolic partial differential equation governing the free surface evolution is derived. The influence of elastic distortion energy and of imposed anchoring variations at the substrate are explored through linear stability analysis and scaling arguments, which yield useful insight and predictions for the behaviour of spreading droplets. This behaviour is captured by fully nonlinear time-dependent simulations of three dimensional droplets spreading in the …
From biological tissues to layers of paint, macroscopic non-porous materials with the capacity to swell when brought in contact with an appropriate solvent are ubiquitous. Here, we study experimentally and theoretically one of the conceptually simplest of such systems, the swelling of a thin hydrogel layer by a single water drop. Using a bespoke experimental setup, we observe fast absorption leading to a radially spreading axisymmetric blister. Employing a linear poroelastic framework and thin-layer scalings, we develop a non-linear one-dimensional diffusion equation for the evolution of the b…
The state-of-the-art deep learning-based object recognition YOLO algorithm and object tracking DeepSORT algorithm are combined to analyze digital images from fluid dynamic simulations of multi-core emulsions and soft flowing crystals and to track moving droplets within these complex flows. The YOLO network was trained to recognize the droplets with synthetically prepared data, thereby bypassing the labor-intensive data acquisition process. In both applications, the trained YOLO + DeepSORT procedure performs with high accuracy on the real data from the fluid simulations, with low error levels i…
We study the spreading of droplets in a near-critical phase-separated liquid mixture, using a combination of experiments, lubrication theory and finite-element numerical simulations. The classical Tanner's law describing the spreading of viscous droplets is robustly verified when the critical temperature is neared. Furthermore, the microscopic cut-off length scale emerging in this law is obtained as a single free parameter for each given temperature. In total-wetting conditions, this length is interpreted as the thickness of the thin precursor film present ahead of the apparent contact line. T…
We study the time evolution of a sessile liquid droplet, which is initially put onto a solid surface in a non-equilibrium configuration and then evolves towards its equilibrium shape. We adapt here the standard approach to the dynamics of mechanical dissipative systems, in which the driving force, i.e. the gradient of the system's Lagrangian function, is balanced against the rate of the dissipation function. In our case the driving force is the loss of the droplet's free energy due to the increase of its base radius, while the dissipation occurs due to viscous flows in the core of the droplet …
Particle beams are important tools for probing atomic and molecular interactions. Here we demonstrate that particle beams also offer a unique opportunity to investigate interactions in macroscopic systems, such as granular media. Motivated by recent experiments on streams of grains that exhibit liquid-like breakup into droplets, we use molecular dynamics simulations to investigate the evolution of a dense stream of macroscopic spheres accelerating out of an opening at the bottom of a reservoir. We show how nanoscale details associated with energy dissipation during collisions modify the stream…
Controlling the spatial distribution of liquid droplets on surfaces via surface energy patterning can be used to control material delivery to specified regions via selective liquid/solid wetting. While studies of the equilibrium shape of liquid droplets on heterogenous substrates exist, much less is known about the corresponding wetting kinetics. We make significant progress towards elucidating details of this topic by studying, via large-scale atomistic simulations, liquid nanodroplets spreading on chemically patterned surfaces. A model is presented for lines of polymer liquid (droplets) on s…
The spreading of liquid nanodroplets of different initial radii $R_{0}$ is studied using molecular dynamics simulation. Results for two distinct systems, Pb on Cu(111), which is non-wetting, and a coarse grained polymer model, which wets the surface, are presented for Pb droplets ranging in size from $\sim55 000$ to $220 000$ atoms and polymer droplets ranging in size from $\sim200 000$ to $780 000$ monomers. In both cases, a precursor foot precedes the spreading of the main droplet. This precursor foot spreads as $r_{f}^{2}(t)=2D_{eff}t$ with an effective diffusion constant that exhibits a dr…
We present a study of the spreading of liquid droplets on a solid substrate at very small scales. We focus on the regime where effective wetting energy (binding potential) and surface tension effects significantly influence steady and spreading droplets. In particular, we focus on strong packing and layering effects in the liquid near the substrate due to underlying density oscillations in the fluid caused by attractive substrate-liquid interactions. We show that such phenomena can be described by a thin-film (or long-wave or lubrication) model including an oscillatory Derjaguin (or disjoining…
The interplay between phase separation and wetting of multicomponent mixtures is ubiquitous in nature and technology and recently gained significant attention across scientific disciplines, due to the discovery of biomolecular condensates. It is well understood that sessile droplets, undergoing phase separation in a static wetting configuration, exhibit microdroplet nucleation at their contact lines, forming an oil ring during later stages. However, very little is known about the dynamic counterpart, when phase separation occurs in a non-equilibrium wetting configuration, i.e., spreading dropl…
We report new dynamical modes in confined soft granular flows, such as stochastic jetting and dripping, with no counterpart in continuum viscous fluids. The new modes emerge as a result of the propagation of the chaotic behaviour of individual grains -- here, monodisperse emulsion droplets to the level of the entire system as the emulsion is focused into a narrow orifice by an external viscous flow. We observe avalanching dynamics and the formation of remarkably stable jets -- singlefile granular chains -- which occasionally break, resulting in a non-Gaussian distribution of cluster sizes. We …
We examine the spreading of a suspension of non-Brownian spheres suspended in a Newtonian liquid on a solid substrate. We show that the spreading dynamics is well described by the classical Cox-Voinov law provided the value of the fluid viscosity that arises in the capillary number of the problem is adjusted to a value that depends on particle size and volume fraction in a non-trivial way. We demonstrate that this behavior is a signature of the ability of the particles to approach the contact line close enough to affect dissipation.
This research found that when an acidic solution with a low surface tension spread on the surface of a glycerol solution mixed with milk, a star shaped pattern was spontaneously formed on the surface in the horizontal plane during the spreading process. We investigated the emergence of the star shaped pattern owing to an interfacial instability in experiments using glycerol solutions with several viscosities and 2-methoxyethanol aqueous solutions, which are acidic solutions, with several concentrations. This result demonstrated that the star shaped pattern emerged in the high concentration of …
We investigate the dynamics of spreading of a small liquid droplet in gas in a one-component simple fluid, where the temperature is inhomogeneous around 0.9Tc and latent heat is released or generated at the interface upon evaporation or condensation (with Tc being the critical temperature). In the scheme of the dynamic van der Waals theory, the hydrodynamic equations containing the gradient stress are solved in the axisymmetric geometry. We assume that the substrate has a finite thickness and its temperature obeys the thermal diffusion equation. A precursor film then spreads ahead of the bulk …
The impact of a hydrogel sphere onto a granular target results in both the deformation of the sphere and the formation of a prominent topographic feature known as impact crater on the granular surface. We investigate the crater formation and scaling, together with the spreading diameter and post-impact dynamics of the spheres by performing a series of experiments, varying the Young's modulus $Y$ and impact speed $U_{0}$ of the hydrogel spheres, and the packing fraction and grain size of the granular target. We determine how the crater diameter and depth depend on $Y$ and find the data to be co…
As a droplet impacts on a granular substrate, both the intruder and the target deform, during which the liquid may penetrate into the substrate. {These three aspects together distinguish} it from other impact phenomena in the literature. We perform high-speed, double-laser profilometry measurements and disentangle the dynamics into three aspects: the deformation of the substrate during the impact, the maximum spreading diameter of the droplet, and the penetration of the liquid into the substrate. By systematically varying the impact speed and the packing fraction of the substrate, (i) the subs…
When sand flows out of a funnel onto a surface, a three dimensional pile that is stabilized by friction grows taller as it spreads. Here we investigate an idealized two dimensional analogue: spreading of a pile of monodisperse oil droplets at a boundary. In our system the droplets are buoyant, adhesive, and in contrast to sand, here friction is negligible. The buoyant droplets are added to the pile one-at-a-time. As the aggregate grows, it reaches a critical height and the 2D pile spreads out across the barrier. We find that, while granularity is important, the growth process is reminiscent of…
Molecular dynamics simulations are used to study the spreading of binary polymer nanodroplets in a cylindrical geometry. The polymers, described by the bead-spring model, spread on a flat surface with a surface-coupled Langevin thermostat to mimic the effects of a corrugated surface. Each droplet consists of chains of length 10 or 100 monomers with ~350,000 monomers total. The qualitative features of the spreading dynamics are presented for differences in chain length, surface interaction strength, and composition. When the components of the droplet differ only in surface interaction strength,…
The spontaneous spreading of non-volatile liquid droplets on solid substrates poses a classic problem in the context of wetting phenomena. It is well known that the spreading of a macroscopic droplet is in many cases accompanied by a thin film of macroscopic lateral extent, the so-called precursor film, which emanates from the three-phase contact line region and spreads ahead of the latter with a much higher speed. Such films have been usually associated with liquid-on-solid systems, but in the last decade similar films have been reported to occur in solid-on-solid systems. While the situation…
The problem of the spreading of a granular mass released at the top of a rough inclined plane was investigated. We experimentally measure the evolution of the avalanche from the initiation up to the deposit using a Moiré image processing technique. The results are quantitatively compared with the prediction of an hydrodynamic model based on depth averaged equations. In the model, the interaction between the flowing layer and the rough bottom is described by a non trivial friction force whose expression is derived from measurements on steady uniform flows. We show that the spreading of the mass…
The fragmentation of liquid sheets produces a collection of droplets. The size distribution of the droplets has a considerable impact on the coating efficiency of sprays and the transport of contaminants. Although many processes commonly used particulate suspensions, the influence of the particles on the spreading dynamics of the sheet and its subsequent fragmentation has so far been considered negligible. In this paper, we consider experimentally a transient suspension sheet that expands radially. We characterize the influence of the particles on the dynamics of the liquid sheet and the fragm…
