We derive an expression for a density operator estimated via Bayesian quantum inference in the limit of an infinite number of measurements.
This expression is derived under the assumption that the reconstructed system is in a pure state. In this case the estimation corresponds to an averaging over a generalized microcanonical ensemble of pure states satisfying a set of constraints imposed by the measured mean values of the observables under consideration. We show that via the ``purification'' ansatz, statistical mixtures can also be consistently reconstructed via the quantum Bayesian inference scheme. In this case the estimation corresponds to averaging over the generalized canonical ensemble of states satisfying the given constraints, and the reconstructed density operator maximizes the von Neumann entropy (i.e., this density operator is equal to the generalized canonical density operator which follows from the Jaynes principle of maximum entropy). We study in detail the reconstruction of the spin-1/2 density operator and discuss the logical connection between the three reconstruction schemes, i.e., (1) quantum Bayesian inference, (2) reconstruction via the Jaynes principle of maximum entropy, and (3) discrete quantum tomography.
We report an experimental realization of an adaptive quantum state tomography protocol. Our method takes advantage of a Bayesian approach to statistical inference and is naturally tailored for adaptive strategies. For pure states we observe close to 1/N scaling of infidelity with overall number of registered events, while best non-adaptive protocols allow for $1/\sqrt{N}$ scaling only. Experiments are performed for polarization qubits, but the approach is readily adapted to any dimension.
We present an empirical strategy to determine the Hamiltonian dynamics of a two-qubit system using only initialization and measurement in a single fixed basis. Signal parameters are estimated from measurement data using Bayesian methods from which the underlying Hamiltonian is reconstructed, up to three unobservable phase factors. We extend the method to achieve full control Hamiltonian tomography for controllable systems via a multi-step approach. The technique is demonstrated and evaluated by analyzing data from simulated experiments including projection noise.
Continuous-variable (CV) photonic states are of increasing interest in quantum information science, bolstered by features such as deterministic resource state generation and error correction via bosonic codes. Data-efficient characterization methods will prove critical in the fine-tuning and maturation of such CV quantum technology. Although Bayesian inference offers appealing properties -- including uncertainty quantification and optimality in mean-squared error -- Bayesian methods have yet to be demonstrated for the tomography of arbitrary CV states. Here we introduce a complete Bayesian qua…
We point out that the quantum de Finetti representation, unique for infinitely extendable exchangeable systems, assigns a non-zero Quantum Discord to uncorrelated systems and thus cannot serve as an universal prior distribution in the Bayesian Quantum Tomography. This apparent paradox stems from linearity of the Born rule for the probability assignment in Quantum Mechanics, which results in mixing of one's knowledge about the quantum state and the representative of the state in one density matrix.
Benchmarking and characterising quantum states and logic gates is essential in the development of devices for quantum computing. We introduce a Bayesian approach to self-consistent process tomography, called fast Bayesian tomography (FBT), and experimentally demonstrate its performance in characterising a two-qubit gate set on a silicon-based spin qubit device. FBT is built on an adaptive self-consistent linearisation that is robust to model approximation errors. Our method offers several advantages over other self-consistent tomographic methods. Most notably, FBT can leverage prior informatio…
The outcome statistics of an informationally complete quantum measurement for a system in a given state can be used to evaluate the ensemble expectation of any linear operator in the same state, by averaging a function of the outcomes that depends on the specific operator. Here we introduce two novel data-processing strategies, non-linear in the frequencies, which lead to faster convergence to theoretical expectations.
We consider how to characterize the dynamics of a quantum system from a restricted set of initial states and measurements using Bayesian analysis. Previous work has shown that Hamiltonian systems can be well estimated from analysis of noisy data. Here we show how to generalize this approach to systems with moderate dephasing in the eigenbasis of the Hamiltonian. We illustrate the process for a range of three-level quantum systems. The results suggest that the Bayesian estimation of the frequencies and dephasing rates is generally highly accurate and the main source of errors are errors in the …
We present a simple and efficient Bayesian recursive algorithm for the data-pattern scheme for quantum state reconstruction, which is applicable to situations where measurement settings can be controllably varied efficiently. The algorithm predicts the best measurements required to accurately reconstruct the unknown signal state in terms of a fixed set of probe states. In each iterative step, this algorithm seeks the measurement setting that minimizes the variance of the data-pattern estimator, which essentially measures the reconstruction accuracy, with the help of a data-pattern bank that wa…
A Bayesian approach to quantum process tomography has yet to be fully developed due to the lack of appropriate probability distributions on the space of quantum channels. Here, by associating the Choi matrix form of a completely positive, trace preserving (CPTP) map with a particular space of matrices with orthonormal columns, called a Stiefel manifold, we present two parametric probability distributions on the space of CPTP maps that enable Bayesian analysis of process tomography. The first is a probability distribution that has an average Choi matrix as a sufficient statistic. The second is …
Standard Bayesian credible-region theory for constructing an error region on the unique estimator of an unknown state in general quantum-state tomography to calculate its size and credibility relies on heavy Monte~Carlo sampling of the state space followed by sample rejection. This conventional method typically gives negligible yield for very small error regions originating from large datasets. We propose an operational reformulated theory to compute both size and credibility from region-average quantities that in principle convey information about behavior of these two properties as the credi…
The coexistence of quantum and classical signals over the same optical fiber with minimal degradation of the transmitted quantum information is critical for operating large-scale quantum networks over the existing communications infrastructure. Here, we systematically characterize the quantum channel that results from simultaneously distributing approximate single-photon polarization-encoded qubits and classical light of varying intensities through fiber-optic channels of up to 15~km. Using spectrally resolved quantum process tomography with a Bayesian reconstruction method we developed, we es…
Bayesian inference is a powerful paradigm for quantum state tomography, treating uncertainty in meaningful and informative ways. Yet the numerical challenges associated with sampling from complex probability distributions hampers Bayesian tomography in practical settings. In this Article, we introduce an improved, self-contained approach for Bayesian quantum state estimation. Leveraging advances in machine learning and statistics, our formulation relies on highly efficient preconditioned Crank--Nicolson sampling and a pseudo-likelihood. We theoretically analyze the computational cost, and prov…
In this letter we revisit the problem of optimal design of quantum tomographic experiments. In contrast to previous approaches where an optimal set of measurements is decided in advance of the experiment, we allow for measurements to be adaptively and efficiently re-optimised depending on data collected so far. We develop an adaptive statistical framework based on Bayesian inference and Shannon's information, and demonstrate a ten-fold reduction in the total number of measurements required as compared to non-adaptive methods, including mutually unbiased bases.
In recent years, Bayesian methods have been proposed as a solution to a wide range of issues in quantum state and process tomography. State-of-the-art Bayesian tomography solutions suffer from three problems: numerical intractability, a lack of informative prior distributions, and an inability to track time-dependent processes. Here, we address all three problems. First, we use modern statistical methods, as pioneered by Huszár and Houlsby and by Ferrie, to make Bayesian tomography numerically tractable. Our approach allows for practical computation of Bayesian point and region estimators for …
Quantum state tomography, an important task in quantum information processing, aims at reconstructing a state from prepared measurement data. Bayesian methods are recognized to be one of the good and reliable choice in estimating quantum states~\cite{blume2010optimal}. Several numerical works showed that Bayesian estimations are comparable to, and even better than other methods in the problem of $1$-qubit state recovery. However, the problem of choosing prior distribution in the general case of $n$ qubits is not straightforward. More importantly, the statistical performance of Bayesian type es…
Several Bayesian estimation based heuristics have been developed to perform quantum state tomography (QST). Their ability to quantify uncertainties using region estimators and include a priori knowledge of the experimentalists makes this family of methods an attractive choice for QST. However, specialized techniques for pure states do not work well for mixed states and vice versa. In this paper, we present an adaptive particle filter (PF) based QST protocol which improves the scaling of fidelity compared to nonadaptive Bayesian schemes for arbitrary multi-qubit states. This is due to the proto…
We provide a review of the experimental and theoretical research in the field of quantum tomography with an emphasis on recently developed adaptive protocols. Several statistical frameworks for adaptive experimental design are discussed. We argue in favor of the Bayesian approach, highlighting both its advantages for a statistical reconstruction of unknown quantum states and processes, and utility for adaptive experimental design. The discussion is supported by an analysis of several recent experimental implementations and numerical recipes.
In quantum process tomography, it is possible to express the experimenter's prior information as a sequence of quantum operations, i.e., trace-preserving completely positive maps. In analogy to de Finetti's concept of exchangeability for probability distributions, we give a definition of exchangeability for sequences of quantum operations. We then state and prove a representation theorem for such exchangeable sequences. The theorem leads to a simple characterization of admissible priors for quantum process tomography and solves to a Bayesian's satisfaction the problem of an unknown quantum ope…
Owing in large part to the advent of integrated biphoton frequency combs (BFCs), recent years have witnessed increased attention to quantum information processing in the frequency domain for its inherent high dimensionality and entanglement compatible with fiber-optic networks. Quantum state tomography (QST) of such states, however, has required complex and precise engineering of active frequency mixing operations, which are difficult to scale. To address these limitations, we propose a novel solution that employs a pulse shaper and electro-optic phase modulator (EOM) to perform random operati…
Adaptive measurements were recently shown to significantly improve the performance of quantum state tomography. Utilizing information about the system for the on-line choice of optimal measurements allows to reach the ultimate bounds of precision for state reconstruction. In this article we generalize an adaptive Bayesian approach to the case of process tomography and experimentally show its superiority in the task of learning unknown quantum operations. Our experiments with photonic polarization qubits cover all types of single-qubit channels. We also discuss instrumental errors and the crite…
Quantum state tomography (QST) is typically performed from a frequentist viewpoint using maximum likelihood estimation (MLE) which seeks to find the best plausible state consistent with the data by maximizing a likelihood function / distribution. The likelihood function holds an implicit assumption that there is suitable data to infer frequency. In data-starved experiments, this may or may not be a feasible assumption. Moreover, MLE returns no error estimates on the final solution and users are forced to rely on alternative approaches involving either additional measurements or simulated data.…
The classical de Finetti theorem provides an operational definition of the concept of an unknown probability in Bayesian probability theory, where probabilities are taken to be degrees of belief instead of objective states of nature. In this paper, we motivate and review two results that generalize de Finetti's theorem to the quantum mechanical setting: Namely a de Finetti theorem for quantum states and a de Finetti theorem for quantum operations. The quantum-state theorem, in a closely analogous fashion to the original de Finetti theorem, deals with exchangeable density-operator assignments a…
As increasingly impressive quantum information processors are realized in laboratories around the world, robust and reliable characterization of these devices is now more urgent than ever. These diagnostics can take many forms, but one of the most popular categories is tomography, where an underlying parameterized model is proposed for a device and inferred by experiments. Here, we introduce and implement efficient operational tomography, which uses experimental observables as these model parameters. This addresses a problem of ambiguity in representation that arises in current tomographic app…
We give bounds on the average fidelity achievable by any quantum state estimator, which is arguably the most prominently used figure of merit in quantum state tomography. Moreover, these bounds can be computed online---that is, while the experiment is running. We show numerically that these bounds are quite tight for relevant distributions of density matrices. We also show that the Bayesian mean estimator is ideal in the sense of performing close to the bound without requiring optimization. Our results hold for all finite dimensional quantum systems.
Demonstration of machine-learning-enhanced Bayesian quantum state estimation
University of Illinois Chicago（伊利诺伊大学芝加哥分校）；Arizona State University（亚利桑那州立大学）；Oak Ridge National Laboratory（橡树岭国家实验室）；DEVCOM US Army Research Laboratory（美国陆军作战能力发展司令部陆军研究实验室）；Tulane University（杜兰大学）
Expanding a remark of my PHD-thesis the noncommutative bayesian statistical inference from one wedge of a bifurcate Killing horizon is analyzed looking at its inter-relation with the Unruh effect
