A quantum master equation model for the interaction between a two-level system and whispering-gallery modes (WGMs) of a microdisk cavity is presented, with specific attention paid to current experiments involving a semiconductor quantum dot (QD) embedded in a fiber-coupled, AlGaAs microdisk cavity. In standard single mode cavity QED, three important rates characterize the system: the QD-cavity coupling rate g, the cavity decay rate kappa, and the QD dephasing rate gamma_perpendicular. A more accurate model of the microdisk cavity includes two additional features. The first is a second cavity mode that can couple to the QD, which for an ideal microdisk corresponds to a traveling wave WGM propagating counter to the first WGM. The second feature is a coupling between these two traveling wave WGMs, at a rate beta, due to backscattering caused by surface roughness that is present in fabricated devices. We consider the transmitted and reflected signals from the cavity for different parameter regimes of {g,beta,kappa,gamma_perpendicular}. A result of this analysis is that even in the presence of negligible roughness induced backscattering, a strongly coupled QD mediates coupling between the traveling wave WGMs, resulting in an enhanced effective coherent coupling rate g = sqrt(2)*g0 corresponding to that of a standing wave WGM with an electric field maximum at the position of the QD. In addition, analysis of the second-order correlation function of the reflected signal from the cavity indicates that regions of strong photon antibunching or bunching may be present depending upon the strength of coupling of the QD to each of the cavity modes. Such intensity correlation information will likely be valuable in interpreting experimental measurements of a strongly-coupled QD to a bi-modal WGM cavity.
Micron scale silicon nitride (SiN_x) microdisk optical resonators are demonstrated with Q = 3.6 x 10^6 and an effective mode volume of 15 (λ/ n)^3 at near visible wavelengths. A hydrofluoric acid wet etch provides sensitive tuning of the microdisk resonances, and robust mounting of a fiber taper provides efficient fiber optic coupling to the microdisks while allowing unfettered optical access for laser cooling and trapping of atoms. Measurements indicate that cesium adsorption on the SiN_x surfaces significantly red-detunes the microdisk resonances. A technique for parallel integration of mult…
Fiber taper waveguides are used to improve the efficiency of room temperature photoluminescence measurements of AlGaAs microdisk resonant cavities with embedded self-assembled InAs quantum dots. As a near-field collection optic, the fiber taper improves the collection efficiency from microdisk lasers by a factor of ~ 15-100 times in comparison to conventional normal incidence free-space collection techniques. In addition, the fiber taper can serve as a efficient means for pumping these devices, and initial measurements employing fiber pumping and collection are presented. Implications of this …
We present theoretical results of a low-loss all-optical switch based on electromagnetically induced transparency and the classical Zeno effect in a microdisk resonator. We show that a control beam can modify the atomic absorption of the evanescent field which suppresses the cavity field buildup and alters the path of a weak signal beam. We predict more than 35 dB of switching contrast with less than 0.1 dB loss using just 2 micro-Watts of control-beam power for signal beams with less than single photon intensities inside the cavity.
We demonstrate gallium phosphide (GaP) microdisk optical cavities with intrinsic quality factors $ > 2.8\times10^{5}$ and mode volumes $< 10 (λ/n)^3$, and study their nonlinear and optomechanical properties. For optical intensities up to $8.0\times10^4$ intracavity photons, we observe optical loss in the microcavity to decrease with increasing intensity, indicating that saturable absorption sites are present in the GaP material, and that two-photon absorption is not significant. We observe optomechanical coupling between optical modes of the microdisk around 1.5 $μ$m and several mechanical res…
The quality factor (Q), mode volume (Veff), and room-temperature lasing threshold of microdisk cavities with embedded quantum dots (QDs) are investigated. Finite element method simulations of standing wave modes within the microdisk reveal that Veff can be as small as 2(lambda/n)^3 while maintaining radiation-limited Qs in excess of 10^5. Microdisks of diameter D=2 microns are fabricated in an AlGaAs material containing a single layer of InAs QDs with peak emission at lambda = 1317 nm. For devices with Veff ~2 (lambda/n)^3, Qs as high as 1.2 x 10^5 are measured passively in the 1.4 micron band…
A fiber taper waveguide is used to perform direct optical spectroscopy of a microdisk-quantum-dot system, exciting the system through the photonic (light) channel rather than the excitonic (matter) channel. Strong coupling, the regime of coherent quantum interactions, is demonstrated through observation of vacuum Rabi splitting in the transmitted and reflected signals from the cavity. The fiber coupling method also allows the examination of the system's steady-state nonlinear properties, where saturation of the cavity-QD response is observed for less than one intracavity photon.
We report on the radiative interaction of two single quantum dots (QDs) each in a separate InP/GaInP-based microdisk cavity via resonant whispering gallery modes. The investigations are based on ab initio coupled disk modes. We apply optical spectroscopy involving a $4f$-setup, as well as mode-selective real space imaging and photoluminescence mapping to discern single QDs coupled to a resonant microdisk mode. Excitation of one disk of the double cavity structure and detecting photoluminescene from the other yields proof of single photon emission of a QD excited by incoherent energy transfer f…
Diamond nanocrystals containing NV color centers are positioned with 100-nanometer-scale accuracy in the near-field of a high-Q SiO2 microdisk cavity using a fiber taper. The cavity modified nanocrystal photoluminescence is studied, with Fano-like quantum interference features observed in the far-field emission spectrum. A quantum optical model of the system is proposed, from which the NV- zero phonon line coherent coupling rate to the microdisk is estimated to be 28 MHz for a nearly optimally placed nanocrystal.
Optical characterization of AlGaAs microdisk resonant cavities with a quantum dot active region is presented. Direct passive measurement of the optical loss within AlGaAs microdisk resonant structures embedded with InAs/InGaAs dots-in-a-well (DWELL) is performed using an optical-fiber-based probing technique at a wavelength (lambda~1400 nm) that is red-detuned from the dot emission wavelength (lambda~1200 nm). Measurements in the 1400 nm wavelength band on microdisks of diameter D = 4.5 microns show that these structures support modes with cold-cavity quality factors as high as 360,000. DWELL-…
We study entanglement of the motional degrees of freedom of two tethered and optically trapped microdisks inside a single cavity. By properly choosing the position of the trapped objects in the optical cavity and driving proper modes of the cavity it is possible to equip the system with linear and quadratic optomechanical couplings. We show that a parametric coupling between the fundamental vibrational modes of two tethered mircodiscs can be generated via a time modulated input laser. For a proper choice of the modulation frequency, this mechanism can drive the motion of the microdisks into an…
Controlled tuning of the whispering gallery modes of GaN/InGaN μ-disk cavities is demonstrated. The whispering gallery mode (WGM) tuning is achieved at room temperature by immersing the μ-disks in water and irradiating with ultraviolet (UV) laser. The tuning rate can be controlled by varying the laser excitation power, with a nanometer precision accessible at low excitation power (~ several μW). The selective oxidation mechanism is proposed to explain the results and supported by theoretical analysis. The tuning of WGMs in GaN/InGaN μ-disk cavities may have important implication in cavity quan…
We propose a scheme of quantum information processing with NV-centers embedded inside diamond nanostructure. Single NV-center placed in the cavity plays role of an electron spin qubit which evolution is controlled by microwave pulses. Besides, it couples to the cavity field via optical photon exchange. In their turn, neighbor cavities are coupled to each other through the photon hopping to form a bus waveguide mode. This waveguide mode overlaps with all NV-centers. Entanglement between distant centers is organized by appropriate tuning of their optical frequency relative to the waveguide frequ…
The entanglement characteristics including the so-called sudden death effect between two identical two-level atoms trapped in two separate cavities connected by an optical fiber are studied. The results show that the time evolution of entanglement is sensitive not only to the degree of entanglement of the initial state but also to the ratio between cavity-fiber coupling () and atom-cavity coupling (). This means that the entanglement dynamics can be controlled by choosing specific v and g.
We propose a quantum memory protocol based on trapping photons in a fiber-integrated cavity, comprised of a birefringent fiber with dichroic reflective end facets. Photons are switched into resonance with the fiber cavity by intracavity Bragg-scattering frequency translation, driven by ancillary control pulses. After the storage delay, photons are switched out of resonance with the cavity, again by intracavity frequency translation. We demonstrate storage of quantum-level THz-bandwidth coherent states for a lifetime up to 16 cavity round trips, or 200ns, and a maximum overall efficiency of 73%…
We study the interaction of an atom with a quantum guided field in a weakly driven fiber-Bragg-grating (FBG) cavity. We present an effective Hamiltonian and derive the density-matrix equations for the combined atom-cavity system. We calculate the mean photon number, the second-order photon correlation function, and the atomic excited-state population. We show that, due to the confinement of the guided cavity field in the fiber cross-section plane and in the space between the FBG mirrors, the presence of the atom in the FBG cavity can significantly affect the mean photon number and the photon s…
We study the behavior of a single laser-driven trapped ion inside a microscopic optical Fabry-Perot cavity. In particular, we demonstrate a fiber Fabry-Perot cavity operating on the principal $S_{1/2}\to P_{1/2}$ electric dipole transition of an Yb$^+$ ion at $369\,$nm with an atom-ion coupling strength of $g=2π\times 67(1)\,$MHz. We employ the cavity to study the generation of single photons and observe cavity-induced back-action in the Purcell-enhanced emission of photons. Tuning of the amplitude and phase of the back-action allows us to enhance or suppress the total rate of photoemission fr…
The distributed quantum computation plays an important role in large-scale quantum information processing. In the atom-cavity-fiber system, we put forward two efficient proposals to prepare the steady entanglement of two distant atoms with dissipation. The atomic spontaneous emission and the loss of fiber are exploited actively as powerful resources, while the effect of cavity decay is inhibited by quantum Zeno dynamics and quantum-jump-based feedback control. These proposals do not require precisely tailored Rabi frequencies or coupling strength between cavity and fiber. Furthermore, we discu…
We develop a one-step scheme for generating multiparticle entangled states between two cold atomic clouds in distant cavities coupled by an optical fiber. We show that, through suitably choosing the intensities and detunings of the fields and precisely tuning the time evolution of the system, multiparticle entanglement between the separated atomic clouds can be engineered deterministically, in which quantum manipulations are insensitive to the states of the cavity and losses of the fiber. The experimental feasibility of this scheme is analyzed based on recent experimental advances in the reali…
We propose a scheme for high quantum state transfer efficiency between two distant mechanical oscillators. Through coupling separately to two optical cavities connected by an optical fiber, two distant mechanical oscillators achieve a transfer efficiency closing to unity. In the process of analysis, we employed time-varying optomechanical coupling strength as a Gaussian pulse.
When cavity photons couple to an optical fiber with a continuum of modes, they usually leak out within a finite amount of time. However, if the fiber is about one meter long and linked to a mirror, photons bounce back and forth within the fiber on a much faster time scale. As a result, {\em dynamical decoupling} prevents the cavity photons from entering the fiber. In this paper we use the simultaneous dynamical decoupling of a large number of distant cavities from the fiber modes of linear optics networks to mediate effective cavity-cavity interactions in a huge variety of configurations. Cohe…
Hexagonal boron nitride (h-BN), a prevalent insulating crystal for dielectric and encapsulation layers in two-dimensional (2D) nanoelectronics and a structural material in 2D nanoelectromechanical systems (NEMS), has also rapidly emerged as a promising platform for quantum photonics with the recent discovery of optically active defect centers and associated spin states. Combined with measured emission characteristics, here we propose and numerically investigate the cavity quantum electrodynamics (cavity-QED) scheme incorporating these defect-enabled single photon emitters (SPEs) in h-BN microd…
The development of efficient network nodes is a key element for the realisation of quantum networks which promise great capabilities as distributed quantum computing or provable secure communication. We report the realisation of a quantum network node using a trapped ion inside a fiber-based Fabry-Perot cavity. We show the generation of deterministic entanglement at a high fidelity of $ 91.2(2) $\,\% between a trapped Yb--ion and a photon emitted into the resonator mode. We achieve a success probability for generation and detection of entanglement for a single shot of $ 2.5 \cdot 10^{-3}$ resu…
Quantum entanglement is important quanum resources in quantum information sicence. Here we propose an approach to {preparing} atomic quantum entanglement in a hybrid atom-cavity-fiber system. Using quantum Zeno dynamics method, the system evolution states are always split into a series of Zeno invariant {subspaces} consisting of dark and bright states. By choosing the initial state of the system, the bright states are all neglected and only dark states are kept to build the effective Hamiltonian. By tuning the system parameters, two-atom multiple-dimensional entanglement, two-atom Bell state, …
We propose a scheme for single-atom, quantum control of the direction of propagation of a coherent field incident, via a tapered fiber, upon a microtoroidal whispering-gallery-mode (WGM) resonator. The scheme involves overcoupling of the fiber-taper to the resonator and strong coupling of an atom to the evanescent field of the WGM, i.e., an atom-field coupling that exceeds the total WGM linewidth. In contrast to previous, related schemes that operate in the bad-cavity regime, the proposed scheme can operate effectively with much stronger incident fields, while also preserving their coherent na…
We propose an effective scheme for realizing a long-range quantum state phase-covariant cloning between two qubits in fiber-nanocavity system via an adiabatic passage. Since no cavity (fiber) photons or excited levels of the nitrogen-vacancy (NV) center are populated during the whole process, the scheme is immune to the decay of cavity (fiber) and spontaneous emission of the NV center. The strictly numerical simulation shows that the fidelity is high even in the presence of realistic imperfections.
We present an ion trap with an integrated fiber cavity, designed for strong coupling at the level of single ions and photons. The cavity is aligned to the axis of a miniature linear Paul trap, enabling simultaneous coupling of multiple ions to the cavity field. We simulate how charges on the fiber mirrors affect the trap potential, and we test these predictions with an ion trapped in the cavity. Furthermore, we measure micromotion and heating rates in the setup.
We demonstrate an all-fiber cavity QED system with a trapped single atom in the strong coupling regime. We use a nanofiber Fabry-Perot cavity, that is, an optical nanofiber sandwiched by two fiber-Bragg-grating mirrors. Measurements of the cavity transmission spectrum with a single atom in a state-insensitive nanofiber trap clearly reveal the vacuum Rabi splitting.
In recent years quantum phenomena have been experimentally demonstrated on variety of optomechanical systems ranging from micro-oscillators to photonic crystals. Since single photon couplings are quite small, most experimental approaches rely on the realization of high finesse Fabry-Perot cavities in order to enhance the effective coupling. Here we show that by exploiting a, long path, low finesse fiber Fabry-Perot interferometer ground state cooling can be achieved. We model a 100 m long cavity with a finesse of 10 and analyze the impact of additional noise sources arising from the fiber. As …
We study the role of stimulated Brillouin scattering in a fiber cavity by numerical simulations and a simple theoretical model and find good agreement between experiment, simulation and theory. We also investigate an optomechanical system based on a fiber cavity in the presence on the nonlinear Brillouin scattering. Using simulation and theory, we show that this hybrid optomechanical system increases optomechanical damping for low mechanical resonance frequencies in the unresolved sideband regime. Furthermore, optimal damping occurs for blue detuning in stark contrast to standard optomechanics…
We present the realization of a combined trapped-ion and optical cavity system, in which a single Yb^+ ion is confined by a micron-scale ion trap inside a 230 mum-long optical fiber cavity. We characterize the spatial ion-cavity coupling and measure the ion-cavity coupling strength using a cavity-stimulated Lambda-transition. Owing to the small mode volume of the fiber resonator, the coherent coupling strength between the ion and a single photon exceeds the natural decay rate of the dipole moment. This system can be integrated into ion-photon quantum networks and is a step towards cavity quant…
We experimentally demonstrate a ring geometry all-fiber cavity system for cavity quantum electrodynamics with an ensemble of cold atoms. The fiber cavity contains a nanofiber section which mediates atom-light interactions through an evanescent field. We observe well-resolved, vacuum Rabi splitting of the cavity transmission spectrum in the weak driving limit due to a collective enhancement of the coupling rate by the ensemble of atoms within the evanescent field, and we present a simple theoretical model to describe this. In addition, we demonstrate a method to control and stabilize the resona…
PbS quantum dots are promising active emitters for use with high-quality Si nanophotonic devices in the telecommunications-band. Measurements of low quantum dot densities are limited both because of low fluorescence levels and the challenges of single photon detection at these wavelengths. Here, we report on methods using a fiber taper waveguide to efficiently extract PbS quantum dot photoluminescence. Temperature dependent ensemble measurements reveal an increase in emitted photons concomitant with an increase in excited-state lifetime from 58.9 ns at 293 K to 657 ns at 40 K. Measurements are…
We present a light-matter interface which consists of a single $^{174}$Yb$^+$ ion coupled to an optical fiber-cavity. We observe that photons at 935 nm are mainly emitted into the cavity mode and that correlations between the polarization of the photon and the spin state of the ion are preserved despite the intrinsic coupling into a single-mode fiber. Complementary, when a faint coherent light field is injected into the cavity mode we find enhanced and polarization dependent absorption by the ion.
We have realized a fiber-based Fabry-Perot cavity with CO2 laser-machined mirrors. It combines very small size, high finesse F>=130000, small waist and mode volume, and good mode matching between the fiber and cavity modes. This combination of features is a major advance for cavity quantum electrodynamics (CQED), as shown in recent CQED experiments with Bose-Einstein condensates enabled by this cavity [Y. Colombe et al., Nature 450, 272 (2007)]. It should also be suitable for a wide range of other applications, including coupling to solid-state emitters, gas detection at the single-particle le…
We demonstrate highly efficient coupling of light from an optical fiber to a silicon photonic crystal optomechanical cavity. The fiber-to-cavity coupling utilizes a compact (L ~ 25 um) intermediate adiabatic coupler. The optical coupling is lithographically controlled, broadband, relatively insensitive to fiber misalignment, and allows for light to be transferred from an optical fiber to, in principle, any photonic chip with refractive index greater than that of the optical fiber. Here we demonstrate single-sided cavity coupling with a total fiber-to-cavity optical power coupling efficiency of…
We propose a realization of the quantum transistor for coherent light fields for the fibre-coupled microdisk cavities. We demonstrate by combining numerical and analytical methods that both in strong coupling and bad cavity limits it is possible to change system's behaviour from being fully transparent to being fully reflective by varying the amplitude of the external control field. We remark that tuning the amplitude of the control field is significantly easier in the experimental setting than tuning cavity-atom coupling strength which was suggested in [Phys. Rev. A 90, 053822 (2014)] for two…
We describe an optomechanical device consisting of a fiber-based optical cavity containing a silicon nitiride membrane. In comparison with typical free-space cavities, the fiber-cavity's small mode size (10 μm waist, 80 μm length) allows the use of smaller, lighter membranes and increases the cavity-membrane linear coupling to 3 GHz/nm and quadratic coupling to 20 GHz/nm^2. This device is also intrinsically fiber-coupled and uses glass ferrules for passive alignment. These improvements will greatly simplify the use of optomechanical systems, particularly in cryogenic settings. At room temperat…
We study a fully on-fiber optomechanical cavity and characterize its performance as a sensor. The cavity is formed by patterning a suspended metallic mirror near the tip of an optical fiber and by introducing a static reflector inside the fiber. Optically induced self-excited oscillation (SEO) is observed above a threshold value of the injected laser power. The SEO phase can be synchronized by periodically modulating the optical power that is injected into the cavity. Noise properties of the system in the region of synchronization are investigated. Moreover, the spectrum is measured near diffe…
A semiclassical model is presented for characterizing the linear response of elementary quantum optical systems involving cavities, optical fibers, and atoms. Formulating the transmission and reflection spectra using a scattering-wave (transfer matrix) approach, the calculations become easily scalable. To demonstrate how useful this method is, we consider the example of a simple quantum network, i.e., two cavity-QED systems connected via an optical fiber. Differences between our quasi-exact transfer matrix approach and a single-mode, linearized quantum-optical model are demonstrated for parame…
We report the realization of a device based on a single Nitrogen-vacancy (NV) center in diamond coupled to a fiber-cavity for use as single photon source (SPS). The device consists of two concave mirrors each directly fabricated on the facets of two optical fibers and a preselected nanodiamond containing a single NV center deposited onto one of these mirrors. Both, cavity in- and output are directly fiber-coupled and the emission wavelength is easily tunable by variation of the separation of the two mirrors with a piezo-electric crystal. By coupling to the cavity we achieve an increase of the …
We present and characterize fiber mirrors and a miniaturized ion-trap design developed to integrate a fiber-based Fabry-Perot cavity (FFPC) with a linear Paul trap for use in cavity-QED experiments with trapped ions. Our fiber-mirror fabrication process not only enables the construction of FFPCs with small mode volumes, but also allows us to minimize the influence of the dielectric fiber mirrors on the trapped-ion pseudopotential. We discuss the effect of clipping losses for long FFPCs and the effect of angular and lateral displacements on the coupling efficiencies between cavity and fiber. Op…
We observe a sixfold Purcell broadening of the D$_2$ line of an optically trapped $^{87}\text{Rb}$ atom strongly coupled to a fiber cavity. Under external illumination by a near-resonant laser, up to $90\%$ of the atom's fluorescence is emitted into the resonant cavity mode. The sub-Poissonian statistics of the cavity output and the Purcell enhancement of the atomic decay rate are confirmed by the observation of a strongly narrowed antibunching dip in the photon autocorrelation function. The photon leakage through the higher-transmission mirror of the single-sided resonator is the dominant con…
We present a novel method of machining optical fiber surfaces with a CO${}_2$ laser for use in Fiber-based Fabry-Perot Cavities (FFPCs). Previously FFPCs were prone to large birefringence and limited to relatively short cavity lengths ($\le$ 200 $μ$m). These characteristics hinder their use in some applications such as cavity quantum electrodynamics with trapped ions. We optimized the laser machining process to produce large, uniform surface structures. This enables the cavities to achieve high finesse even for long cavity lengths. By rotating the fibers around their axis during the laser mach…
A technique is demonstrated which efficiently transfers light between a tapered standard single-mode optical fiber and a resonant mode of a high-Q photonic crystal cavity with mode volume less than a cubic wavelength in size. Cavity mode quality factors of 4.7 x 10^4 are measured, and a total fiber-to-cavity coupling efficiency of 44% is demonstrated.
In this work we present a platform for testing the device performance of a cavity-emitter system, using an ensemble of emitters and a tapered optical fiber. This method provides high-contrast spectra of the cavity modes, selective detection of emitters coupled to the cavity, and an estimate of the device performance in the single- emitter case. Using nitrogen-vacancy (NV) centers in diamond and a GaP optical microcavity, we are able to tune the cavity onto the NV resonance at 10 K, couple the cavity-coupled emission to a tapered fiber, and measure the fiber-coupled NV spontaneous emission deca…
In fiber based Fabry-Pérot Cavities (FFPCs), limited spatial mode matching between the cavity mode and input/output modes has been the main hindrance for many applications. We have demonstrated a versatile mode matching method for FFPCs. Our novel design employs an assembly of a graded-index and large core multimode fiber directly spliced to a single mode fiber. This all-fiber assembly transforms the propagating mode of the single mode fiber to match with the mode of a FFPC. As a result, we have measured a mode matching of 90\% for a cavity length of $\sim$400 $μm$. This is a significant impro…
A high-fidelity source of identical single photons is essential for numerous quantum technologies such as quantum repeaters and optical quantum information processing. Hallmarks thereof are a near-unity single-photon purity, near-unity indistinguishability of consecutively emitted photons, and high brightness through a near-unity number of photons per time bin. In order to embed such sources in quantum networks, optical fiber integration is essential but complicated by cryogenic compatability and noise. Here we demonstrate a resonantly pumped, quantum dot (QD) based, transmission operated, sin…
We present a numerical study of a MEMS-based design of a fiber cavity integrated with an ion trap system. Each fiber mirror is supported by a microactuator that controls the mirror's position in three dimensions. The mechanical stability is investigated by a feasibility analysis showing that the actuator offers a stable support of the fiber. The actuators move the fibers' positions continuously with a stroke of more than 10 $μ$m, with mechanical resonance frequencies on the order of kHz. A calculation of the trapping potential shows that a separation between ion and fiber consistent with stron…
