We discuss the contribution of the material type in metal wires to the electromagnetic fluctuations in magnetic microtraps close to the surface of an atom chip. We show that significant reduction of the magnetic noise can be achieved by replacing the pure noble metal wires with their dilute alloys. The alloy composition provides an additional degree of freedom which enables a controlled reduction of both magnetic noise and resistivity if the atom chip is cooled. In addition, we provide a careful re-analysis of the magnetically induced trap loss observed by Yu-Ju Lin et al. [Phys. Rev. Lett. 92, 050404 (2004)] and find good agreement with an improved theory.
We have fabricated an atom chip device which combines the circuitry for magnetic trapping of cold atoms with high-finesse optical resonators suitable for cavity QED in the single-atom strong coupling regime. Fabry-Perot optical resonators with finesse F > 2 X 10^5 were formed between a micropatterned on-chip planar mirror with lateral dimension of < 100 um and a curved mirror suspended above the chip. The strong and rapid thermal coupling between on-chip electrical and optical elements was utilized to stabilize the cavity mirror separation with servo bandwidth exceeding 100 kHz during simulate…
Atoms can be trapped and guided using nano-fabricated wires on surfaces, achieving the scales required by quantum information proposals. These Atom Chips form the basis for robust and widespread applications of cold atoms ranging from atom optics to fundamental questions in mesoscopic physics, and possibly quantum information systems.
We give a comprehensive overview of the development of micro traps, from the first experiments on guiding atoms using current carrying wires in the early 1990's to the creation of a BEC on an atom chip.
We experimentally demonstrate optical spectroscopy of magnetically trapped atoms on an atom chip. High resolution optical spectra of individual trapped clouds are recorded within a few hundred milliseconds. Detection sensitivities close to the single atom level are obtained by photoionization of the excited atoms and subsequent ion detection with a channel electron multiplier. Temperature and decay rates of the trapped atomic cloud can be monitored in real time for several seconds with only little detection losses. The spectrometer can be used for investigations of ultracold atomic mixtures an…
We have designed and experimentally studied a simple beam splitter for atoms guided on an Atom Chip, using a current carrying Y-shaped wire and a bias magnetic field. This beam splitter and other similar designs can be used to build atom optical elements on the mesoscopic scale, and integrate them in matterwave quantum circuits.
We present a simple scheme for implementing an atomic phase gate using two degrees of freedom for each atom and discuss its realization with cold rubidium atoms on atom chips. We investigate the performance of this collisional phase gate and show that gate operations with high fidelity can be realized in magnetic traps that are currently available on atom chips.
We review recent progress at the Centre for Cold Matter in developing atom chips. An important advantage of miniaturizing atom traps on a chip is the possibility of obtaining very tight trapping structures with the capability of manipulating atoms on the micron length scale. We recall some of the pros and cons of bringing atoms close to the chip surface, as is required in order to make small static structures, and we discuss the relative merits of metallic, dielectric and superconducting chip surfaces. We point out that the addition of integrated optical devices on the chip can enhance its cap…
We study theoretically the lifetime of magnetically trapped atoms in the close vicinity of a type-II superconducting surface, in the context of superconducting atom-chips. We account for the magnetic noise created at the cloud position by the vortices present in the superconductor and give specific results for our experiment which uses a niobium film. Our main result is that atom losses are dominated by the presence of vortices. They remain however dramatically smaller than in equivalent room-temperature atom-chip setups using normal metals.
Atom chips provide a versatile `quantum laboratory on a microchip' for experiments with ultracold atomic gases. They have been used in experiments on diverse topics such as low-dimensional quantum gases, cavity quantum electrodynamics, atom-surface interactions, and chip-based atomic clocks and interferometers. A severe limitation of atom chips, however, is that techniques to control atomic interactions and to generate entanglement have not been experimentally available so far. Such techniques enable chip-based studies of entangled many-body systems and are a key prerequisite for atom chip app…
We have trapped rubidium atoms in the magnetic field produced by a superconducting atom chip operated at liquid Helium temperatures. Up to $8.2\cdot 10^5$ atoms are held in a Ioffe-Pritchard trap at a distance of 440 $μ$m from the chip surface, with a temperature of 40 $μ$K. The trap lifetime reaches 115 s at low atomic densities. These results open the way to the exploration of atom--surface interactions and coherent atomic transport in a superconducting environment, whose properties are radically different from normal metals at room temperature.
We experimentally investigate a scheme for detecting single atoms magnetically trapped on an atom chip. The detector is based on the photoionization of atoms and the subsequent detection of the generated ions. We describe the characterization of the ion detector with emphasis on its calibration via the correlation of ions with simultaneously generated electrons. A detection efficiency of 47.8% (+-2.6%) is measured, which is useful for single atom detection, and close to the limit allowing atom counting with sub-Poissonian uncertainty.
We report on recent developments in the integration of optical microresonators into atom chips and describe some fabrication and implementation challenges. We also review theoretical proposals for quantum computing with single atoms based on the observation of photons leaking through the cavity mirrors. The use of measurements to generate entanglement can result in simpler, more robust and scalable quantum computing architectures. Indeed, we show that quantum computing with atom-cavity systems is feasible even in the presence of relatively large spontaneous decay rates and finite photon detect…
We demonstrate an integrated magnetic ``atom chip'' which transports cold trapped atoms near a surface with very high positioning accuracy. Time-dependent currents in a lithographic conductor pattern create a moving chain of magnetic potential wells; atoms are transported in these wells while remaining confined in all three dimensions. We achieve fluxes up to 10^6 /s with a negligible heating rate. An extension of this ``atomic conveyor belt'' allows the merging of magnetically trapped atom clouds by unification of two Ioffe-Pritchard potentials. Under suitable conditions, the clouds merge wit…
The limitations for the coherent manipulation of neutral atoms with fabricated solid state devices, so-called `atom chips', are addressed. Specifically, we examine the dominant decoherence mechanism, which is due to the magnetic noise originating from the surface of the atom chip. It is shown that the contribution of fluctuations in the chip wires at the shot noise level is not negligible. We estimate the coherence times and discuss ways to increase them. Our main conclusion is that future advances should allow for coherence times as long as one second, a few micrometers away from the surface.
We review the current status of the field of atom-surface interactions, with an emphasis on the regimes specific to atom chips. Recent developments in theory and experiment are highlighted. In particular, atom-surface interactions define physical limits for miniaturization and coherent operation. This implies constraints for applications in quantum information processing or matter wave interferometry. We focus on atom-surface interaction potentials induced by vacuum fluctuations (Van der Waals and Casimir-Polder forces), and on transitions between atomic quantum states that are induced by ther…
Atom chips are a promising candidate for a scalable architecture for quantum information processing provided a universal set of gates can be implemented with high fidelity. The difficult part in achieving universality is the entangling two-qubit gate. We consider a Rydberg phase gate for two atoms trapped on a chip and employ optimal control theory to find the shortest gate that still yields a reasonable gate error. Our parameters correspond to a situation where the Rydberg blockade regime is not yet reached. We discuss the role of spontaneous emission and the effect of noise from the chip sur…
We propose a feasible scheme to achieve quantum computation based on geometric manipulation of ensembles of atoms, and analyze it for neutral rubidium atoms magnetically trapped in planoconcave microcavities on an atom chip. The geometric operations are accomplished by optical excitation of a single atom into a Rydberg state in a constant electric field. Strong dipole-dipole interactions and incident lasers drive the dark state of the atom ensembles to undergo cyclic evolutions that realize a universal set of quantum gates. Such geometric manipulation turns out naturally to protect the qubits …
Entanglement-based technologies, such as quantum information processing, quantum simulations, and quantum-enhanced metrology, have the potential to revolutionise our way of computing and measuring and help clarifying the puzzling concept of entanglement itself. Ultracold atoms on atom chips are attractive for their implementation, as they provide control over quantum systems in compact, robust, and scalable setups. An important tool in this system is a potential depending on the internal atomic state. Coherent dynamics in this potential combined with collisional interactions allows entanglemen…
Nano-mechanical oscillators as well as Rydberg-atomic waveguides hosted on micro-fabricated chip surfaces hold promise to become pillars of future quantum technologies. In a hybrid platform with both, we show that beams of Rydberg atoms in waveguides can quantum-coherently interrogate and manipulate nanomechanical elements, allowing full quantum state tomography. Central to the tomography are quantum non-demolition measurements using the Rydberg atoms as probes. Quantum coherent displacement of the oscillator is also made possible, by driving the atoms with external fields while they interact …
We present a detailed, realistic analysis of the implementation of a proposal for a quantum phase gate based on atomic vibrational states, specializing it to neutral rubidium atoms on atom chips. We show how to create a double--well potential with static currents on the atom chips, using for all relevant parameters values that are achieved with present technology. The potential barrier between the two wells can be modified by varying the currents in order to realize a quantum phase gate for qubit states encoded in the atomic external degree of freedom. The gate performance is analyzed through …
Atom chips use current flowing in lithographically patterned wires to produce microscopic magnetic traps for atoms. The density distribution of a trapped cold atom cloud reveals disorder in the trapping potential, which results from meandering current flow in the wire. Roughness in the edges of the wire is usually the main cause of this behaviour. Here, we point out that the edges of microfabricated wires normally exhibit self-affine roughness. We investigate the consequences of this for disorder in atom traps. In particular, we consider how closely the trap can approach the wire when there is…
In its most general form, the atom chip is a device in which neutral or charged particles are positioned in an isolating environment such as vacuum (or even a carbon solid state lattice) near the chip surface. The chip may then be used to interact in a highly controlled manner with the quantum state. I outline the importance of material science to quantum computing (QC) with atom chips, where the latter may be utilized for many, if not all, suggested implementations of QC. Material science is important both for enhancing the control coupling to the quantum system for preparation and manipulati…
We investigate the optical detection of single atoms held in a microscopic atom trap close to a surface. Laser light is guided by optical fibers or optical micro-structures via the atom to a photo-detector. Our results suggest that with present-day technology, micro-cavities can be built around the atom with sufficiently high finesse to permit unambiguous detection of a single atom in the trap with 10 $μ$s of integration. We compare resonant and non-resonant detection schemes and we discuss the requirements for detecting an atom without causing it to undergo spontaneous emission.
We theoretically study the coupling of Bose-Einstein condensed atoms to the mechanical oscillations of a nanoscale cantilever with a magnetic tip. This is an experimentally viable hybrid quantum system which allows one to explore the interface of quantum optics and condensed matter physics. We propose an experiment where easily detectable atomic spin-flips are induced by the cantilever motion. This can be used to probe thermal oscillations of the cantilever with the atoms. At low cantilever temperatures, as realized in recent experiments, the backaction of the atoms onto the cantilever is sign…
We present a toolbox for cold atom manipulation with time-dependent magnetic fields generated by an atom chip. Wire layouts, detailed experimental procedures and results are presented for the following experiments: Use of a magnetic conveyor belt for positioning of cold atoms and Bose-Einstein condensates with a resolution of two nanometers; splitting of thermal clouds and BECs in adjustable magnetic double well potentials; controlled splitting of a cold reservoir. The devices that enable these manipulations can be combined with each other. We demonstrate this by combining reservoir splitter a…
We propose a two-qubit collisional phase gate that can be implemented with available atom chip technology, and present a detailed theoretical analysis of its performance. The gate is based on earlier phase gate schemes, but uses a qubit state pair with an experimentally demonstrated, very long coherence lifetime. Microwave near-fields play a key role in our implementation as a means to realize the state-dependent potentials required for conditional dynamics. Quantum control algorithms are used to optimize gate performance. We employ circuit configurations that can be built with current fabrica…
We comment on a recent paper [Phys. Rev. Lett. 97, 070401 (2006): quant-ph/0603229] concerning rubidium atoms trapped near a superconducting niobium surface at ~4K. This seeks to calculate the rate of atomic spin flips induced by thermal magnetic noise. We point out that the calculation is in error by a large factor because it is based on the two-fluid model of superconductivity. This model gives a poor description of electromagnetic dissipation just below the critical temperature because it cannot incorporate the case II coherences of a fuller quantum theory.
We propose and analyse a practically implementable scheme to generate macroscopic entanglement of a Bose-Einstein condensate in a micro-magnetic trap magnetically coupled to a superconducting loop. We treat the superconducting loop in a quantum superposition of two different flux states coupled with the magnetic trap to generate macroscopic entanglement. Our scheme also provides a platform to realise interferometry of entangled atoms through the Bose-Einstein condensate and to explore physics at the quantum-classical interface.
We describe a scheme to coherently convert a microwave photon of a superconducting co-planar waveguide resonator to an optical photon emitted into a well-defined temporal and spatial mode. The conversion is realized by a cold atomic ensemble trapped above the surface of the superconducting atom chip, near the antinode of the microwave cavity. The microwave photon couples to a strong Rydberg transition of the atoms that are also driven by a pair of laser fields with appropriate frequencies and wavevectors for an efficient wave-mixing process. With only few thousand atoms in an ensemble of moder…
Using Optimal Control Theory (OCT), we design fast ramps for the controlled transport of Bose-Einstein condensates with atom chips' magnetic traps. These ramps are engineered in the context of precision atom interferometry experiments and support transport over large distances, typically of the order of 1 mm, i.e. about 1,000 times the size of the atomic clouds, yet with durations not exceeding 200 ms. We show that with such transport durations of the order of the trap period, one can recover the ground state of the final trap at the end of the transport. The performance of the OCT procedure i…
We describe an experiment in which Bose-Einstein condensates and cold atom clouds are held by a microscopic magnetic trap near a room temperature metal wire 500 $μ$m in diameter. The ensemble of atoms breaks into fragments when it is brought close to the ceramic-coated aluminum surface of the wire, showing that fragmentation is not peculiar to copper surfaces. The lifetime for atoms to remain in the microtrap is measured over a range of distances down to $27 μ$m from the surface of the metal. We observe the loss of atoms from the microtrap due to spin flips. These are induced by radio-frequenc…
We show that the performance and functionality of atom-chips can be transformed by using graphene-based van der Waals heterostructures to overcome present limitations on the lifetime of the trapped atom cloud and on its proximity to the chip surface. Our analysis involves Green-function calculations of the thermal (Johnson) noise and Casimir-Polder atom-surface attraction produced by the atom-chip. This enables us to determine the lifetime limitations produced by spin-flip, tunneling and three-body collisional losses. Compared with atom-chips that use thick metallic conductors and substrates, …
Arrays of trapped atoms are the ideal starting point for developing registers comprising large numbers of physical qubits for storing and processing quantum information. One very promising approach involves neutral atom traps produced on microfabricated devices known as atom chips, as almost arbitrary trap configurations can be realised in a robust and compact package. Until now, however, atom chip experiments have focused on small systems incorporating single or only a few individual traps. Here we report experiments on a two-dimensional array of trapped ultracold atom clouds prepared using a…
The electric fields near the heterogeneous metal/dielectric surface of an atom chip were measured using cold atoms. The atomic sensitivity to electric fields was enhanced by exciting the atoms to Rydberg states that are 10^8 times more polarizable than the ground state. We attribute the measured fields to charging of the insulators between the atom chip wires. Surprisingly, it is observed that these fields may be dramatically lowered with appropriate voltage biasing, suggesting configurations for the future development of hybrid quantum systems.
On-demand and efficient storage of photons is an essential element in quantum information processing and long-distance quantum communication. Most of the quantum memory protocols require bulk systems in order to store photons. However, with the advent of integrated photonic chip platforms for quantum information processing, on-chip quantum memories are highly sought after. In this paper, we propose a protocol for multi-mode photonic quantum memory using only single-atom-cavity setup. We show that a single atom containing a frequency comb coupled to an optical cavity can store photons efficient…
The electromagnetic manipulation of isolated atoms has led to many advances in physics, from laser cooling and Bose-Einstein condensation of cold gases to the precise quantum control of individual atomic ion. Work on miniaturizing electromagnetic traps to the micrometer scale promises even higher levels of control and reliability. Compared with 'chip traps' for confining neutral atoms, ion traps with similar dimensions and power dissipation offer much higher confinement forces and allow unparalleled control at the single-atom level. Moreover, ion microtraps are of great interest in the develop…
We describe experiments on trapping of atoms in microscopic magneto-optical traps on an optically transparent permanent-magnet atom chip. The chip is made of magnetically hard ferrite-garnet material deposited on a dielectric substrate. The confining magnetic fields are produced by miniature magnetized patterns recorded in the film by magneto-optical techniques. We trap Rb atoms on these structures by applying three crossed pairs of counter-propagating laser beams in the conventional magneto-optical trapping (MOT) geometry. We demonstrate the flexibility of the concept in creation and in-situ …
We demonstrate spatially resolved, coherent excitation of Rydberg atoms on an atom chip. Electromagnetically induced transparency (EIT) is used to investigate the properties of the Rydberg atoms near the gold coated chip surface. We measure distance dependent shifts (~10 MHz) of the Rydberg energy levels caused by a spatially inhomogeneous electric field. The measured field strength and distance dependence is in agreement with a simple model for the electric field produced by a localized patch of Rb adsorbates deposited on the chip surface during experiments. The EIT resonances remain narrow (…
A high-resolution projection and imaging system for ultracold atoms is implemented using a compound silicon and glass atom chip. The atom chip is metalized to enable magnetic trapping while glass regions enable high numerical aperture optical access to atoms residing in the magnetic trap about 100 microns below the chip surface. The atom chip serves as a wall of the vacuum system, which enables the use of commercial microscope components for projection and imaging. Holographically generated light patterns are used to optically slice a cigar-shaped magnetic trap into separate regions; this has …
We describe the fabrication and construction of a setup for creating lattices of magnetic microtraps for ultracold atoms on an atom chip. The lattice is defined by lithographic patterning of a permanent magnetic film. Patterned magnetic-film atom chips enable a large variety of trapping geometries over a wide range of length scales. We demonstrate an atom chip with a lattice constant of 10 $μ$m, suitable for experiments in quantum information science employing the interaction between atoms in highly-excited Rydberg energy levels. The active trapping region contains lattice regions with square …
We study magnetic traps with very high trap frequencies where the spin is coupled to the motion of the atom. This allows us to investigate how the Born-Oppenheimer approximation fails and how effective magnetic and electric fields appear as the consequence of the non-adiabatic dynamics. The results are based on exact numerical diagonalization of the full Hamiltonian describing the coupling between the internal and external degrees of freedom. The position in energy and the decay rate of the trapping states correspond to the imaginary part of the resonances of this Hamiltonian and are computed …
Matter-wave interference experiments enable us to study matter at its most basic, quantum level and form the basis of high-precision sensors for applications such as inertial and gravitational field sensing. Success in both of these pursuits requires the development of atom-optical elements that can manipulate matter waves at the same time as preserving their coherence and phase. Here, we present an integrated interferometer based on a simple, coherent matter-wave beam splitter constructed on an atom chip. Through the use of radio-frequency-induced adiabatic double-well potentials, we demonstr…
We review our experiments on quantum information processing with neutral atoms in optical lattices and magnetic microtraps. Atoms in an optical lattice in the Mott insulator regime serve as a large qubit register. A spin-dependent lattice is used to split and delocalize the atomic wave functions in a controlled and coherent way over a defined number of lattice sites. This is used to experimentally demonstrate a massively parallel quantum gate array, which allows the creation of a highly entangled many-body cluster state through coherent collisions between atoms on neighbouring lattice sites. I…
We realize on an Atom-Chip a practical, experimentally undemanding, tomographic reconstruction algorithm relying on the time-resolved measurements of the atomic population distribution among atomic internal states. More specifically, we estimate both the state density matrix as well as the dephasing noise present in our system by assuming complete knowledge of the Hamiltonian evolution. The proposed scheme is based on routinely performed measurements and established experimental procedures, hence providing a simplified methodology for quantum technological applications.
Hybrid quantum systems involving cold atoms and microwave resonators can enable cavity-mediated infinite-range interactions between atomic spin systems and realize atomic quantum memories and transducers for microwave to optical conversion. To achieve strong coupling of atoms to on-chip microwave resonators, it was suggested to use atomic Rydberg states with strong electric dipole transitions. Here we report on the realization of coherent coupling of a Rydberg transition of ultracold atoms trapped on an integrated superconducting atom chip to the microwave field of an on-chip coplanar waveguid…
In this work we consider the advantages and challenges of using free-standing two-dimensional electron gases (2DEG) as active components in atom chips for manipulating ultracold ensembles of alkali atoms. We calculate trapping parameters achievable with typical high-mobility 2DEGs in an atom chip configuration, and identify advantages of this system for trapping atoms at sub-micron distances from the atom chip. We show how the sensitivity of atomic gases to magnetic field inhomogeneity can be exploited for controlling the atoms with quantum electronic devices and, conversely, using the atoms t…
Adiabatic techniques are well known tools in multi-level electron systems to transfer population between different states with high fidelity. Recently it has been realised that these ideas can also be used in ultra-cold atom systems to achieve coherent manipulation of the atomic centre-of-mass states. Here we present an investigation into a realistic setup using three atomic waveguides created on top of an atom chip and show that such systems hold large potential for the observation of adiabatic phenomena in experiments.
Experiments handling Rydberg atoms near surfaces must necessarily deal with the high sensitivity of Rydberg atoms to (stray) electric fields that typically emanate from adsorbates on the surface. We demonstrate a method to modify and reduce the stray electric field by changing the adsorbates distribution. We use one of the Rydberg excitation lasers to locally affect the adsorbed dipole distribution. By adjusting the averaged exposure time we change the strength (with the minimal value less than $0.2\,\textrm{V/cm}$ at $78\,μ\textrm{m}$ from the chip) and even the sign of the perpendicular fiel…
We theoretically investigate the heating rate and spin flip lifetimes due to near field noise for atoms trapped close to layered superconducting structures. In particular, we compare the case of a gold layer deposited above a superconductor with the case of a bare superconductor. We study a niobium-based and a YBCO-based chip. For both niobium and YBCO chips at a temperature of 4.2 K, we find that the deposition of the gold layer can have a significant impact on the heating rate and spin flip lifetime, as a result of the increase of the near field noise. At a chip temperature of 77 K, this eff…
Superconducting atom chips have very significant advantages in realizing trapping structures for ultracold atoms compared to conventional atom chips. We extend these advantages further by developing the ability to dynamically tailor the superconducting trap architecture. Heating the chosen parts of a superconducting film by transferring optical images onto its surface we are able to modify the current density distribution and create desired trapping potentials. This method enables us to change the shape and structure of magnetic traps, enabling versatile applications in atomtronics.
Hybrid quantum systems that unite laser-cooled trapped ions and ultracold quantum gases in a single experimental setup have opened a rapidly advancing field of study, including Quantum chemistry, polaron physics, quantum information processing and quantum simulations. We present a fully developed and tested ion trap chip and propose a flat chip trap that can be placed beneath the ion trap. This design substantially addresses the difficulties specific to hybrid traps and features well-aligned chips that allow for independent adjustment of the depth of the atomic trap and the confinement and pos…
Superconductors are considered in view of applications to atom chip devices. The main features of magnetic traps based on superconducting wires in the Meissner and mixed states are discussed. The former state may mainly be interesting for improved atom optics, while in the latter, cold atoms may provide a probe of superconductor phenomena. The properties of a magnetic side guide based on a single superconducting strip wire placed in an external magnetic field are calculated analytically and numerically. In the mixed state of type II superconductors, inhomogeneous trapped magnetic flux, relaxat…
We discuss and model an experiment to study quasi-condensate growth on an atom chip. In particular, we consider the addition of a deep dimple to the weak harmonic trap confining an ultracold one-dimensional atomic Bose gas, below or close to the characteristic temperature for quasi-condensate formation. The subsequent dynamics depends critically on both the initial conditions, and the form of the perturbing potential. In general, the dynamics features a combination of shock-wave propagation in the quasi-condensate, and quasi-condensate growth from the surrounding thermal cloud.
We have fabricated and tested an atom chip that operates as a matter wave interferometer. In this communication we describe the fabrication of the chip by ion-beam milling of gold evaporated onto a silicon substrate. We present data on the quality of the wires, on the current density that can be reached in the wires and on the smoothness of the magnetic traps that are formed. We demonstrate the operation of the interferometer, showing that we can coherently split and recombine a Bose-Einstein condensate with good phase stability.
