We present a general formalism allowing for efficient numerical calculation of the production of massless scalar particles from vacuum in a one-dimensional dynamical cavity, i.e. the dynamical Casimir effect. By introducing a particular parametrization for the time evolution of the field modes inside the cavity we derive a coupled system of first-order linear differential equations. The solutions to this system determine the number of created particles and can be found by means of numerical methods for arbitrary motions of the walls of the cavity. To demonstrate the method which accounts for the intermode coupling we investigate the creation of massless scalar particles in a one-dimensional vibrating cavity by means of three particular cavity motions. We compare the numerical results with analytical predictions as well as a different numerical approach.
For one-dimensional vibrating cavity systems appearing in the standard illustration of the dynamical Casimir effect, we propose an approach to the construction of exact closed-form solutions. As new results, we obtain solutions that are given for arbitrary frequencies, amplitudes and time regions. In a broad range of parameters, a vibrating cavity model exhibits the general property of exponential instability. Marginal behavior of the system manifests in a power-like growth of radiated energy.
We study time dependence of various measures of entanglement (covariance entanglement coefficient, purity entanglement coefficient, normalized distance coefficient, entropic coefficients) between resonantly coupled modes of the electromagnetic field in ideal cavities with oscillating boundaries. Two types of cavities are considered: a three-dimensional cavity possessing eigenfrequencies $ω_3=3ω_1$, whose wall oscillates at the frequency $ω_w=2ω_1$, and a one-dimensional (Fabry--Perot) cavity with an equidistant spectrum $ω_n= nω_1$, when the distance between perfect mirrors oscillates at the f…
Nonlinear terms in the equations of motion can induce secularly growing loop corrections to correlation functions. Recently such corrections were shown to affect the particle production by a nonuniformly moving ideal mirror. We extend this conclusion to the cases of ideal vibrating cavity and single semitransparent mirror. These models provide natural IR and UV scales and allow a more accurate study of the loop behavior. In both cases we confirm that two-loop correction to the Keldysh propagator quadratically grows with time. This growth indicates a breakdown of the semiclassical approximation…
We present a canonical formalism facilitating investigations of the dynamical Casimir effect by means of a response theory approach. We consider a massless scalar field confined inside of an arbitaray domain $G(t)$, which undergoes small displacements for a certain period of time. Under rather general conditions a formula for the number of created particles per mode is derived. The pertubative approach reveals the occurance of two generic processes contributing to the particle production: the squeezing of the vacuum by changing the shape and an acceleration effect due to motion af the boundari…
The creation of TE-mode photons in a three-dimensional perfectly conducting cavity with one resonantly vibrating wall is studied numerically. We show that the creation of TE-mode photons in a rectangular cavity is related to the production of massive scalar particles on a time-dependent interval. The equations of motion are solved numerically which allows to take into account the intermode coupling. We compare the numerical results with analytical predictions and discuss the effects of the intermode coupling in detail. The numerical simulations reveal that photon creation in a three-dimensiona…
We recently proposed a new approach to analyze the parametric resonance in a vibrating cavity based on the analysis of classical optical paths. This approach is used to examine various models of cavities with moving walls. We prove that our method is useful to extract easily basic physical outcome.
We propose a feasible and efficient scheme to generate $N$-atom $W$-class states in spatially separated cavities without using any classical driving pulses. We adopt the model in which the couplings between different atoms are mediated only by virtual excitations of the cavity and fiber fields, so the scheme is insensitive to the cavity decay and fiber photon leakage. We carry out both theoretical investigation in a decoherence-free subspace and numerical calculation accounting for decoherence due to the atomic spontaneous emission as well as the decay of cavity and fiber modes. The theoretica…
The phenomenon of particle creation within an almost resonantly vibrating cavity with losses is investigated for the example of a massless scalar field at finite temperature. A leaky cavity is designed via the insertion of a dispersive mirror into a larger ideal cavity (the reservoir). In the case of parametric resonance the rotating wave approximation allows for the construction of an effective Hamiltonian. The number of produced particles is then calculated using response theory as well as a non-perturbative approach. In addition we study the associated master equation and briefly discuss th…
In this work we investigate an optomechanical system consisting of two cavities coupled to the same mechanical resonator. We consider each cavity being weakly pumped as well as a small tunneling rate between the cavities. In such conditions, the system can be studied via quantum Langevin equations and the steady state solution can be found perturbatively. In order to ensure that the approximations and methods used to study the system are suitable, the analytical results were compared to numerical simulations. We study the statistical properties of the cavity radiation fields and we show that d…
We propose a dissipative scheme to prepare a three-dimensional entangled state for two atoms trapped in separate coupled cavities. Our work shows that both atomic spontaneous emission and cavity decay, which are two typical obstacles in unitary-dynamics-based schemes, could be utilized as resources for high-dimensional entangled state preparation without specifying initial state and controlling time precisely. Final numerical simulation with one group of experimental parameters indicates that the performance of our scheme is better than the unitary-dynamics-based scheme.
The interaction between quantum light and matter is being intensively studied for systems that are enclosed in high-$Q$ cavities which strongly enhance the light-matter coupling. However, for many applications, cavities with lower $Q$-factors are preferred due to the increased spectral width of the cavity mode. Here, we investigate the interaction between quantum light and matter represented by a $Λ$-type three-level system in lossy cavities, assuming that cavity losses are the dominant loss mechanism. We demonstrate that cavity losses lead to non-trivial steady states of the electronic occupa…
We propose a practical scheme for one-way quantum computing based on efficient generation of 2D cluster state in thermal cavities. We achieve a controlled-phase gate that is neither sensitive to cavity decay nor to thermal field by adding a strong classical field to the two-level atoms. We show that a 2D cluster state can be generated directly by making every two atoms collide in an array of cavities, with numerically calculated parameters and appropriate operation sequence that can be easily achieved in practical Cavity QED experiments. Based on a generated cluster state in Box$^{(4)}$ config…
The principle of superposition is a key ingredient for quantum mechanics. A recent work [M. Oszmaniec et al., Phys. Rev. Lett. 116, 110403 (2016)] has shown that a quantum adder that deterministically generates a superposition of two unknown states is forbidden. Here we propose a probabilistic approach for creating a superposition state of two arbitrary states encoded in two three-dimensional cavities. Our implementation is based on a three-level superconducting transmon qubit dispersively coupled to two cavities. Numerical simulations show that high-fidelity generation of the superposition of…
We present a scheme able to protect the quantum states of a cavity mode against the decohering effects of photon loss. The scheme preserves quantum states with a definite parity, and improves previous proposals for decoherence control in cavities. It is implemented by sending single atoms, one by one, through the cavity. The atomic state gets first correlated to the photon number parity. The wrong parity results in an atom in the upper state. The atom in this state is then used to inject a photon in the mode via adiabatic transfer, correcting the field parity. By solving numerically the exact …
We study a range of radio-frequency ion trap geometries and investigate the effect of integrating dielectric cavity mirrors on their trapping potential. We aim to identify ion trap and cavity configurations that are best suited for achieving small cavity volumes and thus large ion-photon coupling as required for scalable quantum information networks. In particular, we investigate the trapping potential distortions caused by the dielectric material of the cavity mirrors for different mirror orientations with respect to the trapping electrodes, as well as for mirror misalignment. We also analyze…
By means of analytical and numerical methods we analyze the phase diagram of polaritons in one-dimensional coupled cavities. We locate the phase boundary, discuss the behavior of the polariton compressibility and visibility fringes across the critical point, and find a non-trivial scaling of the phase boundary as a function of the number of atoms inside each cavity. We also predict the emergence of a polaritonic glassy phase when the number of atoms fluctuates from cavity to cavity.
We study photon creation in a cavity with two perfectly conducting moving mirrors. We derive the dynamic equations of the modes and study different situations concerning various movements of the walls, such as translational or breathing modes. We can even apply our approach to one or three dimensional cavities and reobtain well known results of cavities with one moving mirror. We compare the numerical results with analytical predictions and discuss the effects of the intermode coupling in detail as well as the non perturbative regime. We also study the time evolution of the energy density as w…
Cavities with periodically oscillating mirrors have been predicted to excite photon pairs out of the quantum vacuum in a process known as the Dynamical Casimir effect. Here we propose and analyse an experimental layout that can provide an efficient modulation of the effective optical length of a cavity mode in the near-infrared spectral region. An analytical model of the dynamical Casimir emission is developed and compared to the predictions of a direct numerical solution of Maxwell's equations in real time. A sizeable intensity of dynamical Casimir emission is anticipated for realistic operat…
Recently, Grange et al. [Phys. Rev. Lett. 114, 193601 (2015)] showed the possibility of single photon generation with high indistinguishability from a quantum emitter, despite strong pure dephasing, by `funneling' emission into a photonic cavity. Here, we show that cascaded two-cavity system can further improve the photon characteristics and greatly reduce the Q-factor requirement to levels achievable with present-day technology. Our approach leverages recent advances in nanocavities with ultrasmall mode volume and does not require ultrafast excitation of the emitter. These results were obtain…
