A new scheme for the two-dimensional cooling of ion beams in storage rings is suggested in which ions interact with a counterpropagating broad-band laser beam. The interaction region in the direction of the ion movement is much less then the wavelength of the ion betatron oscillations. The laser beam in the orbit plane has sharp flat edge directed to the ion beam and the width of the laser beam of the order of the ion beam width. Laser beam radial position is being displaced with some velocity at first from inside and then from outside to the ion beam and decreases both betatron and synchrotron oscillations.
Physics of enhanced optical cooling of particle beams in storage rings, nonlinear features of cooling and requirements to ring lattices, optical and laser systems are discussed
We are proposing to test experimentally the new idea of Enhanced Optical Cooling (EOC) in an electron storage ring. This experiment will confirm new fundamental processes in beam physics and will demonstrate new unique possibilities with this cooling technique. It will open important applications of EOC in nuclear physics, elementary particle physics and in Light Sources (LS) based on high brightness electron and ion beams.
In preparation for a demonstration of optical stochastic cooling in the Cornell Electron Storage Ring (CESR) we have developed a particle tracking simulation to study the relevant beam dynamics. Optical radiation emitted in the pickup undulator gives a momentum kick to that same particle in the kicker undulator. The optics of the electron bypass from pickup to kicker couples betatron amplitude and momentum offset to path length so that the momentum kick reduces emittance and momentum spread. Nearby electrons contribute an incoherent noise. Layout of the bypass line is presented that accommodat…
Application of electron cooling at ion energies above a few GeV has been limited due to reduction of electron cooling efficiency with energy and difficulty in producing and accelerating a high-current high-quality electron beam. A high-current storage-ring electron cooler offers a solution to both of these problems by maintaining high cooling beam quality through naturally-occurring synchrotron radiation damping of the electron beam. However, the range of ion energies where storage-ring electron cooling can be used has been limited by low electron beam damping rates at low ion energies and hig…
A previous publication has shown that the in-plane polarization (IPP) component of a polarized 0.97-GeV/c deuteron beam in the COSY storage ring may acquire a polarization half-life in excess of 1000 s through a combination of beam bunching, electron cooling (prior to any spin manipulation), sextupole field adjustment, and a limitation of the beam intensity. This paper documents further tests pointing to additional gains in the IPP lifetime if cooling is active throughout the beam store.
Limits of applicability of the Robinson's damping criterion and the problem of enhanced cooling of particle beams in storage rings beyond the criterion are discussed.
Methods of enhanced laser cooling of particle beams in storage rings and Robinson's damping criterion are discussed. The dynamics of amplitudes of betatron oscillations and instantaneous orbits of electrons interacting with laser beams being displaced in the radial direction is investigated.
A method of enhanced optical cooling (EOC) based on nonlinear selective interaction between particles and theirs amplified undulator radiation wavelets (URW) in storage rings is discussed. It leads to non-exponential fast damping. The selectivity is arranged by a moving screen located on the image plane of the optical system projecting URW there.
Stochastic cooling, as the different cooling mechanism from electron cooling, is designed and constructed on CSRe (experimental Cooling Storage Ring) in HIRFL (Heavy Ion Research Facility in Lanzhou) at present. The beam extracted from CSRm (main Cooling Storage Ring) is injected into the CSRe, and then the secondary beam with large momentum spread and large emittance is produced at the internal target area. This paper is designed to optimize the lattice of CSRe in order to satisfy the requirement of stochastic cooling system. Particle Tracking Method is used and both transverse and longitudin…
Laser cooling of relativistic heavy ion beams of Li-like C$^{3+}$ and O$^{4+}$ is being in preparation at the experimental Cooler Storage Ring (CSRe). Recently, a preparatory experiment to test important prerequisites for laser cooling of relativistic $^{12}$C$^{3+}$ ion beams using a pulsed laser system has been performed at the CSRe. Unfortunately, the interaction between the ions and the pulsed laser cannot be detected. In order to study the laser cooling process and find the optimized parameters for future laser cooling experiment, a multi-particle tracking method was developed to simulate…
The High-Energy Storage Ring (HESR) of the future International Facility for Antiproton and Ion Research (FAIR) at GSI in Darmstadt is planned as an antiproton synchrotron and storage ring in the momentum range from 1.5 to 15 GeV/c. An important feature of this new facility is the combination of phase space cooled beams with dense internal targets (e.g. pellet targets), resulting in demanding beam parameter of two operation modes: high luminosity mode with peak luminosities up to 2*10^32 cm-2 s-1, and high resolution mode with a momentum spread down to 10^-5, respectively. To reach these beam …
The paper presents a journal version of the Design Report on the Optical Stochastic Cooling experiment to be carried out at IOTA ring in Fermilab later this year. It discusses the theory which experiment is based on, beam parameters, major requirements to the storage ring systems and technical details of the experiment implementation.
A muon storage ring neutrino source uses an induction linac for muon capture, a 200 MHz copper cavity system for cooling, and 200 and 400 MHz superconducting rf systems for acceleration to a final energy of up to 50 GeV. These systems and their requirements are discussed in this paper.
The six species heavy ion beam was accumulated with the help of electron cooling in the main ring of Cooler Storage Ring of Heavy Ion Research Facility in Lanzhou(HIRFL-CSR), the ion beam accumulation dependence on the parameters of cooler was investigated experimentally. The 400MeV/u 12C6+ and 200MeV/u 129Xe54+ was stored and cooled in the experimental ring CSRe, the cooling force was measured in different condition.
A new 150 MeV electron storage ring is being built at Fermilab. The construction of a new machine pursues two goals: A test of highly non-linear integrable optics and a test of optical stochastic cooling. This paper discusses details of OSC arrangements, choice of major parameters of the cooling scheme and incoming experimental tests of the optical amplifier prototype which uses highly doped Ti-sapphire crystal as amplification medium.
We discuss the optical stochastic cooling (OSC) method in applications to the beams of charged particles, circulating in accelerators and storage rings. In this publication we concentrated on various OSC schemes in a diluted beam approximation, when the heating of selected particle by its neighboring ones could be neglected. Even so, this approximation allows us to identify important features in the beam cooling. In the forthcoming publication, on the basis of approach developed here, we will include effects of heating in the dynamics of cooling.
Some peculiarities of fast laser cooling of long-lived ion beams in storage rings are discussed. Selective interaction of ions and broadband laser beam with sharp frequency and geometric edges is used while laser and ion beams are partially overlapped. The rates of change of the ion beam density in different regions of the phase space and at different moments of time in this scheme of cooling differ. That is why the generalized Robinson theorem valid for the infinitesimal phase space regions of non exponential cooling in turn is used to interpret the results.
Energy recovery linacs have been studied and developed over a number of decades. In the standard arrangement there is a separate particle source and particle beam dump. In this paper, a new arrangement is explored where the energy recovery linac is used as an energy source in a storage ring which has multiple beam energies. Several interesting topologies for the multiple beam energies are shown schematically. Possible energy equilibria with and without radiation damping are discussed. This idea may have applications to the problem of electron cooling.
We describe a new electron cooler being developed for 2.5 MeV protons at the Integrable Optics Test Accelerator (IOTA), which is a highly re-configurable storage ring at Fermilab. This system would enable the study of magnetized electron cooling in the presence of intense space-charge with transverse tune shifts approaching -0.5 as well as highly nonlinear focusing optics in the IOTA ring. We present an overview of the design, simulations and hardware to be used for this project.
Electron cooling as a method of creating intense ion beams has a practical upper limit when it comes to the peak phase space density of ion beams which can be achieved in practice. We describe a new experiment to study electron cooling of 2.5 MeV protons at the intensity limit using the Integrable Optics Test Accelerator (IOTA), which is a storage ring dedicated to beam physics research at Fermilab. This system will enable the study of magnetized electron cooling of a proton beam with transverse incoherent tune shifts approaching -0.5 due to the presence of intense space-charge forces. We pres…
Muon-based accelerators have the potential to enable facilities at both the Intensity and the Energy Frontiers. Muon storage rings can serve as high precision neutrino sources, and a muon collider is an ideal technology for a TeV or multi-TeV collider. Progress in muon accelerator designs has advanced steadily in recent years. In regard to 6D muon cooling, detailed and realistic designs now exist that provide more than 5 order-of-magnitude emittance reduction. Furthermore, detector performance studies indicate that with suitable pixelation and timing resolution, backgrounds in the collider det…
We are exploring the feasibility of a neutrino factory based on a muon storage ring. In this, beams of nu_mu and nubar_e arise from the decay of mu- particles (or alternatively, nubar_mu and nu_e from mu+). The muons come from the decay of low-energy pions produced by a megawatt proton beam incident on a nuclear target. The muons are captured into a magnetic channel, "cooled" by ionization in liquid hydrogen, accelerated to energy of order 50 GeV, and injected into a storage ring. A nonhorizontal ring can deliver neutrino beams to an on-site detector, as well as to two off-site detectors separ…
Various seeding configurations have being proposed for frequency up-conversion of the electron beam density distribution, in which the energy spread, may however hinder the harmonic generation efficiency. In this Letter, a method for cooling the electron beam energy spread by off-resonance seed laser modulation is described, using a transversely dispersed beam and a modulator undulator with proper transverse gradient. With this novel mechanism, it is shown that the frequency up-conversion efficiency can be significantly enhanced. We present theoretical analysis and numerical simulations for se…
Possible parameters of Light Sources (LS) based on Backward Rayleigh Scattering (BRS) of laser photons on relativistic ion beams in storage rings are discussed. It was shown that the parameters of the LS based on the RHIC storage ring (dedicated to High Energy Physics now) satisfy the requirements of the 2d generation LS. Using the ordinary or enhanced radiative cooling of ion beams in storage rings by broad-band lasers will permit to decrease essentially their emittance, dimensions, angular and energy spreads and convert them to the next generation of LS.
We show, through modeling and simulation, that it is feasible to construct a storage ring that will store dense bunches of strong-field-seeking polar molecules at 30 m/s (kinetic energy of 2K) and hold them, for several minutes, against losses due to defocusing, oscillations, and diffusion. The ring, 3 m in diameter, has straight sections that afford access to the stored molecules and a lattice structure that may be adapted for evaporative cooling. Simulation is done using a newly-developed code that tracks the particles, in time, through 400 turns; it accounts for longitudinal velocity change…
Dielectronic recombination (DR) of few-electron ions has evolved into a sensitive spectroscopic tool for highly charged ions. This is due to technological advances in electron-beam preparation and ion-beam cooling techniques at heavy-ion storage rings. Recent experiments prove unambiguously that DR collision spectroscopy has become sensitive to 2nd order QED and to nuclear effects. This review discusses the most recent developments in high-resolution spectroscopy of low-energy DR resonances, experimental studies of KLL DR of very heavy hydrogenlike ions, isotope shift measurements of DR resona…
Storage rings have been employed over three decades in various kinds of nuclear and atomic physics experiments with highly charged ions. Storage ring operation and precision physics experiments benefit from the availability of beam cooling which is common to nearly all facilities. The basic aspects of the storage ring components and the operation of the ring in various ion-optical modes as well as the achievable beam conditions are described. Ion storage rings offer unparalleled capabilities for high precision experiments with stable and radioactive beams. The versatile techniques and methods …
Muon storage rings have been proposed for use as a source of high-energy neutrino beams (the Neutrino Factory) and as the basis for a high-energy lepton-antilepton collider (the Muon Collider). The Neutrino Factory is widely believed to be the machine of choice for the search for leptonic CP violation while the Muon Collider may prove to be the most practical route to multi-TeV lepton-antilepton collisions. The baseline conceptual designs for each of these facilities requires the phase-space compression (cooling) of the muon beams prior to acceleration. The short muon lifetime makes it impossi…
