We demonstrate a new type of optomechanical system employing a movable, micron-scale waveguide evanescently-coupled to a high-Q optical microresonator. Micron-scale displacements of the waveguide are observed for milliwatt(mW)-level optical input powers. Measurement of the spatial variation of the force on the waveguide indicates that it arises from a cavity-enhanced optical dipole force due to the stored optical field of the resonator. This force is used to realize an all-optical tunable filter operating with sub-mW control power. A theoretical model of the system shows the maximum achievable force to be independent of the intrinsic Q of the optical resonator and to scale inversely with the cavity mode volume, suggesting that such forces may become even more effective as devices approach the nanoscale.
Soliton microcombs based on Kerr nonlinearity in microresonators have been a prominent miniaturized coherent light source. Here, for the first time, we demonstrate the existence of Kerr solitons in an optomechanical microresonator, for which a nonlinear model is built by incorporating a single mechanical mode and multiple optical modes. Interestingly, an exotic vibrational Kerr soliton state is found, which is modulated by a self-sustained mechanical oscillation. Besides, the soliton provides extra mechanical gain through the optical spring effect, and results in phonon lasing with a red-detun…
Piezoelectric optomechanical platforms represent one of the most promising routes towards achieving quantum transduction of photons between the microwave and optical frequency domains. However, there are significant challenges to achieving near-unity transduction efficiency. We discuss such factors in the context of the two main approaches being pursued for high efficiency transduction. The first approach uses one-dimensional nanobeam optomechanical crystals excited by interdigitated transducers, and is characterized by large single-photon optomechanical coupling strength, limited intracavity …
Efficient interconversion of both classical and quantum information between microwave and optical frequency is an important engineering challenge. The optomechanical approach with gigahertz-frequency mechanical devices has the potential to be extremely efficient due to the large optomechanical response of common materials, and the ability to localize mechanical energy into a micron-scale volume. However, existing demonstrations suffer from some combination of low optical quality factor, low electrical-to-mechanical transduction efficiency, and low optomechanical interaction rate. Here we demon…
Microwave to optical transduction has received a great deal of interest from the cavity optomechanics community as a landmark application for electro-optomechanical systems. In this Letter, we demonstrate a novel transducer that combines high-frequency mechanical motion and a microwave cavity for the first time. The system consists of a 3D microwave cavity and a gallium arsenide optomechanical crystal, which has been placed in the microwave electric field maximum. This allows the microwave cavity to actuate the gigahertz-frequency mechanical breathing mode in the optomechanical crystal through…
Optical nonreciprocity and routing using optocal microcavities draw much atttention in recent years. Here, we report the results of the study on the nonreciprocity and routing using optomechanical multimode interference in an optical microcavity. The optomechanical system used here possesses multi-optical modes and a mechanical mode. Optomechanical induced transparency and absorption, appear in the system due to the interference between different paths. The system can present significant nonreciprocity and routing properties when appropriate parameters of the system are set. We design quantum …
Cavity optomechanics provides high-performance sensor technology, and the scheme is also applicable to liquid samples for biological and rheological applications. However, previously reported methods using fluidic capillary channels and liquid droplets are based on fixed-by-design structures and therefore do not allow an active free-space approach to the samples. Here, we demonstrate an alternate technique using a probe-based architecture with a twin-microbottle resonator. The probe consists of two microbottle optomechanical resonators, where one bottle (for detection) is immersed in liquid an…
Advanced photonic tools may enable researchers and clinicians to visualize, track, control and manipulate biological processes at the single-cell level in space and time. Biological systems are complex and highly organized on both spatial and temporal levels. If we are to study, perturb, engineer or heal biological entities, we must be able to visualize key players in such systems and to track, control and manipulate them precisely and selectively. To achieve this goal, the engineering of non-destructive tools will allow us to interrogate and manipulate the function of proteins, pathways and c…
Cavity optomechanics has become a powerful tool to manipulate mechanical motion via optical fields. When driving an optomechanical cavity with blue-detuned laser the mechanical motion is amplified, ultimately resulting in phonon lasing. In this work, we show that a silicon optomechanical crystal cavity can be used as an optoelectronic oscillator when driven to the phonon lasing condition. To this end, we use an optomechanical cavity designed to have a breathing-like mechanical mode vibrating at $Ω_{m}/2π=$3.897 GHz in a full phononic bandgap. Our measurements show that the first harmonic displ…
Multidimensional optomechanical cantilevers for high frequency atomic force microscopy
高频原子力显微镜通过对原子和分子结构的大带宽、高速测量实现了非凡的新科学。然而，传统的光学检测方案限制了悬臂梁的尺寸，从而限制了悬臂梁的频率，最终限制了实验的时间分辨率。在这里，我们展示了超过这些限制的低质量，高频率纳米机械杠杆（高达20 MHz）的光学机械检测，预计它们将用于单分子力测量。这些杠杆实现2 fm / sqrt（Hz）位移噪声基底，力灵敏度低至132 aN / sqrt（Hz）。此外，解决我们的悬臂梁的平面内和平面外运动的能力为超灵敏的多维力光谱学打开了大门，并且光机械相互作用，例如原位调整悬臂梁频率，为高速，高分辨率实验提供了新的机会。
Realizing optical manipulation of microscopic objects is crucial in the research fields of life science, condensed matter physics and physical chemistry. In non-liquid environments, this task is commonly regarded as difficult due to strong adhesive surface force ($\simμ\rm N$) between solid interfaces that makes tiny optical driven force ($\sim\rm pN$) insignificant. Here, by recognizing the microscopic interaction mechanism between friction force -- the parallel component of surface force on the contact surface -- and thermoelastic waves induced by pulsed optical absorption, we establish a ge…
Direct laser-written optomechanical double membranes in an optical microcavity
University of Bonn（波恩大学）；Technical University of Munich（慕尼黑工业大学）；Munich Center for Quantum Science and Technology (MCQST)（慕尼黑量子科学与技术中心）；Chalmers University of Technology（查尔姆斯理工大学）
Demonstrating a device that efficiently connects light, motion, and microwaves is an outstanding challenge in classical and quantum photonics. We make significant progress in this direction by demonstrating a photonic crystal resonator on thin-film lithium niobate (LN) that simultaneously supports high-$Q$ optical and mechanical modes, and where the mechanical modes are coupled piezoelectrically to microwaves. For optomechanical coupling, we leverage the photoelastic effect in LN by optimizing the device parameters to realize coupling rates $g_0/2π\approx 120~\textrm{kHz}$. An optomechanical c…
Laser engineered exciton-polariton networks could lead to dynamically configurable integrated optical circuitry and quantum devices. Combining cavity optomechanics with electrodynamics in laser configurable hybrid designs constitutes a platform for the vibrational control, conversion, and transport of signals. With this aim we investigate 3D optical traps laser-induced in quantum-well embedded semiconductor planar microcavities. We show that the laser generated and controlled discrete states of the traps dramatically modify the interaction between photons and phonons confined in the resonators…
