Splashing occurs when a liquid drop hits a dry solid surface at high velocity. This paper reports experimental studies of how the splash depends on the roughness and the texture of the surfaces as well as the viscosity of the liquid. For smooth surfaces, there is a "corona" splash caused by the presence of air surrounding the drop. There are several regimes that occur as the velocity and liquid viscosity are varied. There is also a "prompt" splash that depends on the roughness and texture of the surfaces. A measurement of the size distribution of the ejected droplets is sensitive to the surface roughness. For a textured surface in which pillars are arranged in a square lattice, experiment shows that the splashing has a four-fold symmetry. The splash occurs predominantly along the diagonal directions. In this geometry, two factors affect splashing the most: the pillar height and spacing between pillars.
Because splashing is such a violent process, one might naively expect that neither the direction of droplet emission nor the amount of ejected material can be controlled with any precision. Even though it is observed countless times in the course of a day, drop splashing is highly non-intuitive: for example, it is surprising that the surrounding air pressure determines whether a drop will splash when hitting a smooth surface. Here we describe a discovery with significant practical ramifications: the direction, as well as the number, of the ejected droplets can be controlled by the texture of a…
When a droplet hits a surface fast enough, droplet splashing can occur: smaller secondary droplets detach from the main droplet during impact. While droplet splashing on smooth surfaces is by now well understood, the surface roughness also affects at which impact velocity a droplet splashes. In this study, the influence of the surface roughness on droplet splashing is investigated. By changing the root mean square roughness of the impacted surface, we show that the droplet splashing velocity is only affected when the droplet roughness is large enough to disrupt the spreading droplet lamella an…
We investigate the interplay between substrate roughness and surrounding gas pressure in controlling the dynamics of splashing when a liquid drop hits a dry solid surface. We associate two distinct forms of splashing with each of these control parameters: prompt splashing is due to surface roughness and corona splashing is due to instabilities produced by the surrounding gas. The size distribution of ejected droplets reveals the length scales of the underlying droplet-creation process in both cases.
A liquid drop impacting a solid surface may splash by emitting a thin liquid sheet that subsequently breaks apart or by promptly ejecting droplets from the advancing liquid-solid contact line. Using high-speed imaging, we show that air pressure and surface roughness influence both splash mechanisms. Roughness increases prompt splashing at the advancing contact line but inhibits the formation of the thin sheet. If the air pressure is lowered, droplet ejection is suppressed not only during thin-sheet formation but for prompt splashing as well. The threshold pressure depends on impact velocity, l…
We investigate the impact velocity beyond which the ejection of smaller droplets from the main droplet (splashing) occurs for droplets impacting a smooth surface. We examine its dependence on the surface wetting properties and droplet surface tension. We show that the splashing velocity is independent of the wetting properties of the surface, but increases roughly linearly with increasing surface tension of the liquid. A preexisting splashing model is considered that predicts the splashing velocity by incorporating the air viscosity. The model is consistent with our data, but the calculation i…
Conventional wetting theories on rough surfaces with Wenzel, Cassie-Baxter, and Penetrate modes suggest the possibility of tuning the contact angle by adjusting the surface texture. Despite decades of intensive study, there are still many experimental results that are not well understood because conventional wetting theory, which assume an infinite droplet size, has been used to explain measurements of finite-sized droplets. In this study, we suggest a wetting theory that is applicable to any droplet size based on the free energy landscape analysis of various wetting modes of finite-sized drop…
We experimentally investigate drop impact dynamics onto different superhydrophobic surfaces, consisting of regular polymeric micropatterns and rough carbon nanofibers, with similar static contact angles. The main control parameters are the Weber number \We and the roughness of the surface. At small \We, i.e. small impact velocity, the impact evolutions are similar for both types of substrates, exhibiting Fakir state, complete bouncing, partial rebouncing, trapping of an air bubble, jetting, and sticky vibrating water balls. At large \We, splashing impacts emerge forming several satellite dropl…
Direct Numerical Simulations of two superposed fluids in a channel with a textured surface on the lower wall have been carried out. A parametric study varying the viscosity ratio between the two fluids has been performed to mimic both {\bf idealised} super hydrophobic and liquid infused surfaces and assess its effect on the frictional, form and total drag for three different textured geometries: longitudinal square bars, transversal square bars and staggered cubes. The interface between the two fluids is assumed to be slippery in the streamwise and spanwise directions and not deformable in the…
The superhydrophobic leaves of a lotus plant and other natural surfaces with self-cleaning function have been studied intensively for the development of artificial biomimetic surfaces. Surface roughness generated by hierarchical structures is a crucial property required for superhydrophobicity and self-cleaning. Here, we demonstrate a novel self-cleaning mechanism of textured surfaces attributed to a spontaneous coalescence-induced wetting transition. We focus on the wetting transition as it represents a new mechanism, which can explain why droplets on rough surfaces are able to change from th…
We study the size and shape of the final deposit obtained when a drop with colloidal particles has dried on a super-hydrophobic surface made of micro-posts. As expected, most of the particles lie inside a circular area, which radius roughly corresponds to the Laplace pressure threshold for liquid impalement inside the structure (Cassie-Wenzel transition), inducing a coffee-stain deposit due to contact-line pinning. Less expected is the observation of tiny deposits on top of posts in the area external to the main ring, despite the low macroscopic liquid/solid friction. Experiments are carried o…
Droplet impact of emulsions on inclined microstructured surfaces
Facultad de Ingeniería, Universidad Nacional Autónoma de México（墨西哥国立自治大学工程学院）；Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México（墨西哥国立自治大学材料研究所）
Superhydrophobic Cassie textures with trapped gas bubbles reduce drag, by generating large effective slip, which is important for a variety of applications that involve a manipulation of liquids at the small scale. Here we discuss how the dissipation in the gas phase of textures modifies their friction properties. We propose an operator method, which allows us the mapping of the flow in the gas subphase to a local slip boundary condition at the liquid/gas interface. The determined uniquely local slip length depends on the viscosity contrast and underlying topography, and can be immediately use…
The wetting behaviour of surfaces is important for various applications like super-hydrophobic surfaces, enhanced oil recovery, mining of metal ores and anti-icing surfaces etc. For rough surfaces, which are the rule rather than the exception, designing textured surfaces that have wetting properties tailored to suit these applications generally involves either bio-mimicry or trial and error. Existing wetting theories such as the well-known Wenzel (1936) and Cassie & Baxter (1944) models do not predict wetting regimes and importantly, only give a single equilibrium angle rather than a range of …
The impact of liquid drops on a rigid surface is central in cleaning, cooling and coating processes in both nature and industrial applications. However, it is not clear how details of pores, roughness and texture on the solid surface influence the initial stages of the impact dynamics. Here, we experimentally study drop impacting at low velocities onto surfaces textured with asymmetric (tilted) ridges. We define the line-friction capillary number $Ca_f={μ_f V_0}/σ$ (where $μ_f$, $V_0$ and $σ$ are the line friction, impact velocity and surface tension, respectively) as a measure of the importan…
