Coupling of photonic crystal (PC) linear three-hole defect cavities (L3) to PC waveguides is theoretically and experimentally investigated. The systems are designed to increase the overlap between the evanescent cavity field and the waveguide mode, and to operate in the linear dispersion region of the waveguide. Our simulations indicate increased coupling when the cavity is tilted by 60 degrees with respect to the waveguide axis, which we have also confirmed by experiments. We obtained up to 90% coupling efficiency into the waveguide.
We design compact waveguide couplers via impedance-tunable transformation optics. By tuning impedance coefficients in the original space, two-dimensional metallic and dielectric waveguide couplers are designed with a high efficiency. Through tuning refractive index simultaneously, we find that the transformation medium inside a designed metallic waveguide coupler can be a reduced-parameter material for coupling waves between waveguides with arbitrary different cross sections and embedded media. In the design of dielectric waveguide couplers, we apply two different schemes: one is that both cor…
We report a study of using the same material to fabricate a whispering gallery mode resonator and a coupler. Coupling to high Q whispering gallery modes of the lithium niobate resonator is demonstrated by means of the titanium-doped waveguide. The waveguide coupling approach opens possibilities for simpler and wider practical usage of whispering gallery mode resonators and their integration into optical devices.
We study analytically the polarization behaviour of directional couplers composed of birefringent waveguides, showing that they can induce polarization transformations that depend on the specific input-output path considered. On the basis of this study, we propose and demonstrate experimentally, by femtosecond laser writing, directional couplers that are free from this problem and also yield a polarization independent power-splitting ratio. More in detail, we devise two different approaches to realize such devices: the first one is based on local birefringence engineering, while the second one…
Parity-time-symmetric ($\mathcal{PT}$-symmetric) optical waveguide couplers have become a key component for integrated optics. They offer new possibilities for fast, ultracompact, configurable, all-optical signal processing. Here, we study nonlinear properties of finite-size multimode $\mathcal{PT}$-symmetric couplers and report a peculiar type of dispersion relation in couplers made of more than one dimer. Moreover, we predict a $\mathcal{PT}$ transition triggered by nonlinearity in these structures, and we demonstrate that with the increase of the number of dimers in the system, the transiti…
Photonic waveguides with triangular cross section are being investigated for material systems such as diamond, glasses and gallium nitride, which lack easy options to create conventional rectangular nanophotonic waveguides. The design rules for optical elements in these triangular waveguides, such as couplers and gratings, are not well established. Here we present simulations of elements designed to couple light into, and out of, triangular waveguides from the vertical direction, which can be implemented with current angled-etch fabrication technology. The devices demonstrate coupling efficien…
We design an efficient coupler to transmit light from a strip waveguide into the flatband slow mode of a photonic crystal waveguide with ring-shaped holes. The coupler is a section of a photonic crystal waveguide with a higher group velocity, obtained by different ring dimensions. We demonstrate coupling efficiency in excess of 95% over the 8 nm wavelength range where the photonic crystal waveguide exhibits a quasi constant group velocity vg = c/37. An analysis based on the small Fabry-Pérot resonances in the simulated transmission spectra is introduced and used for studying the effect of the …
We study a class of three-waveguide axially varying structures whose dynamics are described by the su(3) algebra. Their analytic propagator can be found based on the corresponding Lie group generators. In particular, we show that the field propagator corresponding to three-waveguide structures that have arbitrarily varying coupling coefficients and identical refractive indices is associated with the orbital angular momentum algebra. The conditions necessary to achieve perfect transmission from the first to the last waveguide element are obtained and particular cases are elucidated analytically…
Optical technologies call for waveguide networks featuring high integration densities, low losses, and simple operation. Here, we present polymer waveguides fabricated from a negative tone photoresist via two-photon-lithography in direct laser writing, and show a detailed parameter study of their performance. Specifically, we produce waveguides featuring bend radii down to 40 μm, insertion losses of the order of 10 dB, and loss coefficients smaller than 0.81 dB/mm, facilitating high integration densities in writing fields of 300 μm x 300 μm. A novel three-dimensional coupler design allows for …
Due to the limitations either on the sizes of devices and signal routing channels, the current planar integrated optical waveguide circuits await for the further developments into the three-dimensional (3D) integrations, although their designs and fabrications are still challenges. In this paper we demonstrate an analytical method, basing on the invariant engineering, to overcome the complication in the usual method by numerically solving the relevant 3D coupled-mode equations for designing various 3D optical waveguide devices such as the typical couplers. Our method is based on the quantum-op…
The imaging properties of the Maxwell's fisheye (MFE) lens makes it a viable candidate to implement power coupling between different types of waveguides. A coupler based on the MFE lens is designed to couple a square lattice photonic crystal to a triangular lattice one. The MFE lens is implemented as ring-based multilayer and graded photonic crystal (GPC) structures. The performance of the ring-based MFE lens is better than the GPC-based one in the C-band of optical communication. The proposed ring-based MFE coupler has a footprint of $3.62\times 3.62μm$ and covers the entire C and U bands. Th…
Despite the benefits that directional coupler based parity-time symmetric systems may offer to the field of integrated optics, the realization of such couplers relies on rather strict design constraints on the waveguide parameters. Here, we investigate directional couplers built of asymmetric waveguides that do not fulfill parity-time symmetry. Nevertheless, we demonstrate that for properly designed parameters, at least one mode of such couplers shows a behavior similar to the one observed in parity-symmetric systems. We find an analytical condition relating gain and loss that enables such a b…
We demonstrate a novel grating coupler design based on double asymmetric and vertically oriented waveguide scatterers to efficiently couple normally incident light to a fundamental mode silicon waveguide laying on a buried oxide layer.
Vertical coupling using a diffraction grating is a convenient way to couple light into an optical waveguide. Several optimization approaches have been suggested in order to design such a coupler; however, most of them are implemented using algorithm based modelling. In this paper, we suggest an intuitive method based on S-matrix formalism for analytically optimize 3-port vertical grating coupler devices. The suggested method is general and can be applied to any 3-port coupler device in order to achieve an optimal design based on user constrains. The simplicity of the model allows reduction of …
We present a one-port sensor based on a single diffraction grating delineated over a planar optical waveguide. Distinctly to previously reported devices, the grating here is used not only as I/O coupler, but also provides a built-in reference beam which is basically unaffected by the sensing process as manifested in changes of the effective refractive index of the waveguide. The sensing process causes two effects simultaneously: a change in the angle of the out-coupled beam and a change in the phase accumulated by that beam. Both changes can be determined by their conjunction with the referenc…
Metasurfaces have achieved fruitful results in tailoring complexing light fields in free space. However, a systematic investigation on applying the concept of meta-optics to completely control waveguide modes is still elusive. Here we present a comprehensive catalog capable of selectively and exclusively excite almost arbitrary high-order waveguide modes of interest, leveraging silicon metasurface-patterned silicon nitride waveguides. By simultaneously engineering the phase-matched gradient of the metasurface and the vectorial spatial modal overlap between the nanoantenna near-field and target…
Most recently, two remarkable papers [New J. Phys. 21, 113004 (2019); IEEE J. Sel. Top. Quantum Electron 27, 1 (2020)] propose broadband complete transfer terahertz (THz) surface plasmon polaritons (SPPs) waveguide coupler by applying coherent quantum control -- Stimulated Raman adiabatic passage (STIRAP). However, previous researches request three SPPs waveguides coupler. In this paper, we propose a new design of a broadband complete transfer THz SPPs coupler with an innovative structure of two waveguides by employing two state adiabatic following. In order to realize this design, we introduc…
Employing counterdiabatic shortcut to adiabaticity (STA), we design shorter and robust achromatic two- and three- waveguide couplers. We assume that the phase mismatch between the waveguides has a sign flip at maximum coupling, while the coupling between the waveguides has a smooth spatial shape. We show that the presented coupler operates as a complete achromatic optical switch for two coupled waveguides and as an equal superposition beam splitter for three coupled waveguides. An important feature of our devices is that they do not require larger coupling strength as compared to previous desi…
Efficient fiber-to-waveguide light coupling has been a key issue in integrated photonics for many years. The main challenge lies in the huge mode mismatch between an optical fiber and a single mode waveguide. Herein, we present a novel fiber-to-waveguide coupler, named "L-coupler", through which the light fed from the top of a chip can bend 90° with low reflection and is then efficiently coupled into an on-chip Si waveguide within a short propagation distance (<20μm). The key element is a bent metal-clad waveguide with a big matched input port. According to our finite-difference time-domain (F…
The surface plasmon-polaritons (SPPs) switch is the key element of the integrated devices in optical computation and terahertz (THz) communications. In this paper, we propose a novel design of THz SPPs switch based on quantum engineering. Due to the robustness of coherent quantum control technique, our switch is very robust against with perturbations of geometrical parameters and presents a good performance at on-state (and off-state) from 0.5 THz to 0.7 THz. The on-state and off-state of our device can be controlled by the external voltage. We believe this finding will be the great improvemen…
We report enhanced optomechanical coupling by embedding a nano-mechanical beam resonator within an optical race-track resonator. Precise control of the mechanical resonator is achieved by clamping the beam between two low-loss photonic crystal waveguide couplers. The low insertion loss and the rigid mechanical support provided by the couplers yield both high mechanical and optical Q-factors for improved signal quality.
We design a focusing grating coupler by a simultaneous apodization of the filling factor and the period. In addition to in plane focusing to the input waveguide providing a total length of less than 70μm, a further apodization of the curvature allows out of plane focusing into a fiber set 150μm away from the grating surface. The design is proposed for novel semiconductor on insulator waveguides such as GaInP. The coupling efficiency is calculated from two dimensional simulation which is about 45%.
In this paper, we propose a method for the generation of higher dimensional modal entanglement through type II spontaneous parametric down conversion process using a three waveguide directional coupler in a periodically poled lithium niobate substrate. We show that by a proper design, it is possible to achieve an output state of two photons occupying three different spatial modes. The advantage of using such waveguide structure is its flexibility and the design space availability to achieve desired characteristics of the photon pairs generated in the down conversion process
A highly sensitive refractive index sensor based on grating-assisted strip waveguide directional coupler is proposed. The sensor is designed using two coupled asymmetric strip waveguides with a top-loaded grating structure in one of the waveguides. Maximum light couples from one waveguide to the other at the resonance wavelength, and the change in resonance wavelength with the change in refractive index of the medium in the cover region is a measure of the sensitivity. The proposed sensor would be an on-chip device with a high refractive index sensitivity of ~ 104 nm/RIU, and negligible temper…
A concept for a low loss all-reflective cavity coupler is experimentally demonstrated at a wavelength of 1064 nm. A 1450 nm period dielectric reflection grating with a diffraction efficiency of 0.58 % in the -1st order is used in 2nd order Littrow configuration as a coupler to form a cavity with a finesse of 400. The application of such reflective low-loss cavity couplers in future generations of gravitational-wave detectors as well as some implementation issues are discussed.
We propose a directional coupler exploiting the framework of adiabatic passage for two level atomic systems with configuration dependent Allen-Eberly scheme. Recently developed shortcut to adiabatic passage method (STA), which uses transitionless quantum driving algorithm, is applied to the coupler. The study shows that it is possible to reduce the device length significantly using STA, keeping the efficiency of power transfer100%.Shortcut approach shows much superiority in terms of robustness and fidelity in power switching compared to the adiabatic one.
We study light-beam propagation in a nonlinear coupler with an asymmetric double-channel waveguide and derive various analytical forms of optical modes. The results show that the symmetry-preserving modes in a symmetric double-channel waveguide are deformed due to the asymmetry of the two-channel waveguide, yet such a coupler supports the symmetry-breaking modes. The dispersion relations reveal that the system with self-focusing nonlinear response supports the degenerate modes, while for self-defocusingmedium the degenerate modes do not exist. Furthermore, nonlinear manipulation is investigate…
We report on two edge-coupling and power splitting devices for hybrid integration of III-V lasers with sub-micrometric silicon-on-insulator (SOI) waveguides. The proposed devices relax the horizontal alignment tolerances required to achieve high coupling efficiencies and are suitable for passively aligned assembly with pick-and-place tools. Light is coupled to two on-chip single mode SOI waveguides with almost identical power coupling efficiency, but with a varying relative phase accommodating the lateral misalignment between the laser diode and the coupling devices, and is suitable for the im…
Optical microresonators are of paramount importance in photonic circuits requiring fine spectral filtering or resonant light recirculation. Key performance metrics improve with increasing resonance quality factor (Q) across all applications. The performance of silicon photonic circuits is often hampered by the low-quality factor of planar silicon microresonators, typically of Q~10^4-10^5. On the other hand, bulk whispering gallery mode resonators provide a wide range of materials with intriguing optical properties and exceptionally high resonant quality factors Q>10^7. However, the efficient c…
We propose a robust and broadband integrated terahertz (THz) coupler based on the in-plane surface plasmon polaritons (SPPs) waveguides, conducted with the quantum coherent control -- Stimulated Raman Adiabatic Passage (STIRAP). Our coupler consists of two asymmetric specific curved corrugated metallic structures working as the input and output SPPs waveguides, and one straight corrugated metallic structure functioning as the middle SPPs waveguide. From the theoretical and simulated results, we demonstrate that the SPPs can be efficiently transfered from the input to the output waveguides. Our…
Shortcut to Adiabatic Passage (SHAPE) technique, in the context of coherent control of atomic systems has gained considerable attention in last few years. It is primarily because of its ability to manipulate population among the quantum states infinitely fast compared to the adiabatic processes. Two methods in this regard have been explored rigorously, namely the transitionless quantum driving and the Lewis-Reisenfeld invariant approach. We have applied these two methods to realize SHAPE in adiabatic waveguide coupler. Waveguide couplers are integral components of photonic circuits, primarily …
Lithium niobate (LN) devices have been widely used in optical communication and nonlinear optics due to its attractive optical properties. The emergence of thin-film lithium niobate on insulator (LNOI) improves performances of LN-based devices greatly. However, a high-efficient fiber-chip optical coupler is still necessary for the LNOI-based devices for practical applications. In this paper, we demonstrate a highly efficient and polarization-independent edge coupler based on LNOI. The coupler, fabricated by standard semiconductor process, shows a low fiber-chip coupling loss of 0.54 dB/0.59 dB…
Shortcut to adiabatic passage (STAP), initially proposed to accelerate adiabatic quantum state transfer, has been widely explored and applied in quantum optics and integrated optics. Here we bring STAP into the field of acoustics to design compact couplers and functional metamaterial. The space-varying coupling strengths of acoustic waveguides (WGs) are tailored by means of dressed states in a three-level system, accounting for the desirable acoustic energy transfer among three WGs with short length. We show that the acoustic coupler has one-way feature when loss is introduced into the interme…
Silicon nitride ($Si_3N_4$) planar waveguide platform combined with silicon-on-insulator (SOI) devices offer a whole new generation of system-on-chip applications. Therefore, efficient coupling of an $Si_3N_4$ waveguide to an SOI waveguide is essential. We present a coupler to interface a 1.8 $μm$-wide $Si_3N_4$ waveguide to a 0.5 $μm$-wide SOI waveguide based on the focusing property of the Luneburg lens. In order to match the refractive indices of the waveguides with the edges of the lens, one side of the lens is flattened with quasi-conformal transformation optics. The designed coupler is i…
We fabricate a saturable absorber mirror by coating a graphene film on an output coupler mirror. This is then used to obtain Q-switched mode-locking from a diode pumped linear cavity waveguide laser inscribed in Ytterbium-doped Bismuthate Glass, with high slope and optical conversion efficiencies. The laser produces mode-locked pulses at 1039nm, with 1.5GHz repetition rate at an average 202mW output power. This performance is due to the combination of the graphene saturable absorber with the high quality laser glass.
Efficient coupling between on-chip sources and cavities plays a key role in silicon photonics. However, despite the importance of this basic functionality, there are few systematic design tools to simultaneously control coupling between multiple modes in a compact resonator and a single waveguide. Here, we propose a large-scale adjoint optimization approach to produce wavelength-scale waveguide--cavity couplers operating over tunable and broad frequency bands. We numerically demonstrate couplers discovered by this method that can achieve critical, or nearly critical, coupling between multi-rin…
In this paper, we present the design and experimental demonstration of a high dynamic range electric field sensor based on electro-optic (EO) polymer directional coupler waveguides that offers the strong and ultra-fast EO response of EO polymer. As compared to conventional photonic electric field sensors, our directional coupler waveguide design offers several advantages such as bias-free operation, highly linear measurement response up to 70dB, and a wide electric field detection range from 16.7V/m to 750kV/m at a frequency of 1GHz.
An integrated optical dipole trap uses two-color (red and blue-detuned) traveling evanescent wave fields for trapping cold neutral atoms. To achieve longitudinal confinement, we propose using an integrated optical waveguide coupler, which provides a potential gradient along the beam propagation direction sufficient to confine atoms. This integrated optical dipole trap can support an atomic ensemble with a large optical depth due to its small mode area. Its quasi-TE0 waveguide mode has an advantage over the HE11 mode of a nanofiber, with little inhomogeneous Zeeman broadening at the trapping re…
Planar waveguides can limit the transmission of electromagnetic waves in a specific direction and have a wide range of applications in filters, sensors, and energy-transfer devices. However, given the increasing demand for planar integrated photonics, new waveguides are required with excellent characteristics such as more functionality, greater efficiency, and smaller size. In this work, we report the experimental results for a subwavelength planar microwave-regime waveguide fabricated from circuit-based magnetic hyperbolic metamaterial (HMM) and develop the associated theory. HMM is a special…
Topological waveguides have been extensively studied for their robust transmission properties immune to defects and their application potentials for microwave and terahertz integrated circuits. In this work, by using grounded planar valley-Hall photonic topological insulators, a high-efficiency topological directional coupler fed directly by microstrip line with configurable coupling coefficient is theoretically proposed and experimentally demonstrated. The topological directional coupler consists of two coupled topological waveguides, which can be directly integrated with microstrip circuits.…
We propose and demonstrate a passively biased 2 by 2 thermo-optic switch with high power efficiency and fast response time. The device benefits from the highly concentrated optical field of a slot waveguide mode and the strong thermo-optic effect of a nematic liquid crystal (NLC) cladding. The NLC fills the nano-slot region and is aligned by the subwavelength grating inside. The measured power consumption and thermal time constant are 0.58 mW and 11.8 microsecond, respectively, corresponding to a figure-of-merit of 6.8. The proposed silicon-organic hybrid device provides a new solution to desi…
Efficient coupling between integrated optical waveguides and optical fibers is essential to the success of integrated photonics. While many solutions exist, perfectly vertical grating couplers which scatter light out of a waveguide in the direction normal to the waveguide's top surface are an ideal candidate due to their potential to reduce packaging complexity. Designing such couplers with high efficiency, however, has proven difficult. In this paper, we use electromagnetic inverse design techniques to optimize a high efficiency two-layer perfectly vertical silicon grating coupler. Our base d…
We report single-mode 3D optical couplers leveraging adiabatic power transfer towards up to 4 output ports. We use the CMOS compatible additive (3+1)D \emph{flash}-TPP printing for fast and scalable fabrication. Coupling optical losses of such devices are reduced below $\sim$~0.06~dB by tailoring the coupling and waveguides geometry, and we demonstrate almost octave-spanning broadband functionality from 520~nm to 980~nm.
Optical nanofiber waveguides are widely used for near-field delivery and measurement of light. Despite their versatility and efficiency, nanofibers have a critical drawback - their inability to maintain light's polarization state on propagation. Here, we design a directional coupler consisting of two crossed nanofibers to probe the polarization state at the waist region. Directionality of coupling occurs due to asymmetric dipolar emission or spin-locking when the evanescent field pattern breaks the mirror symmetry of the crossed-nanofiber system. We demonstrate that, by monitoring the outputs …
We present a detailed analysis of a coupler based on the Luneburg lens to couple a silica waveguide to a photonic crystal waveguide. The dependence of coupling efficiency on the lens's truncation, cut position of the photonic crystal structure, coupler tip width, and misalignment are investigated with two-dimensional finite element method. We implement the lens with a concentric ring-based multilayer structure. We also present a method to replace layers with very narrow widths by layers of predetermined minimum widths in the structure of the lens. The coupling loss of the designed 2.7 $μm$-lon…
In this paper we present the design, manufacturing, characterization and analysis of the coupling ratio spectral response for Multimode Interference (MMI) couplers in Silicon-on-Insulator (SOI) technology. The couplers were designed using a Si rib waveguide with SiO 2 cladding, on a regular 220 nm film and 2 μm buried oxide SOI wafer. A set of eight different designs, three canonical and five using a widened/narrowed coupler body, have been subject of study, with coupling ratios 50:50, 85:15 and 72:28 for the former, and 95:05, 85:15, 75:25, 65:35 and 55:45 for the latter. Two wafers of device…
