We study the optical properties of metamaterials made from cut-wire pairs or plate pairs. We obtain a more pronounced optical response for arrays of plate pairs -- a geometry which also eliminates the undesired polarization anisotropy of the cut-wire pairs. The measured optical spectra agree with simulations, revealing negative magnetic permeability in the range of telecommunications wavelengths. Thus, nanoscopic plate pairs might serve as an alternative to the established split-ring resonator design.
We present a metamaterial-based random polarization control plate to produce incoherent laser irradiation by exploiting the ability of metamaterial in local polarization manipulation of beam upon transmission via tuning its local geometry. As a proof-of-principle, we exemplify this idea numerically in a simple optical system using a typical L-shaped plasmonic metamaterial with locally varying geometry, from which the desired polarization distribution can be obtained. The calculating results illustrate that this scheme can effectively suppress the speckle contrast and increase irradiation unifo…
We have fabricated a quarter-wave plate from a single layer birefringent metamaterial. For comparison, an appropriately scaled double layer meanderline structure was fabricated. At the design frequency of 639 GHz, the metamaterial structure achieves 99.9% circular polarization while the meanderline achieves 99.6%. The meanderline displays a larger bandwidth of operation, attaining over 99% circular polarization from 615 - 743 GHz, while the metamaterial achieves 99% from 626 - 660 GHz. However, both are broad enough for use with CW sources making metamaterials a more attractive choice due to t…
We study the eigenmodes of a slab of a wire metamaterial and demonstrate that such a waveguiding structure supports deep-subwavelength propagating modes exhibiting properties of a single-mode waveguide at any fixed frequency below the plasma frequency of metal wires. We compare our analytical results with the dispersion relations extracted from the experimental measurements.
We study numerically and experimentally magnetic metamaterials based on cut-wire pairs instead of split-ring resonators. The cut-wire pair planar structure is extended in order to create a truly two-dimensional metamaterial suitable for scaling to optical frequencies. We fabricate the cut-wire metamaterial operating at microwave frequencies with lattice spacing around 10% of the free-space wavelength, and find good agreement with direct numerical simulations. Unlike the structures based on split-ring resonators, the nearest-neighbor coupling in cut-wire pairs can result in a magnetic stop-band…
Here, we present an overview of a first principles homogenization theory of periodic metamaterials. It is shown that in a rather general context it is possible to formally introduce effective parameters that describe the time evolution of macroscopic (slowly-varying in space) initial states of the electromagnetic field using an effective medium formalism. The theory is applied to different types of "wire metamaterials" characterized by a strong spatial dispersion in the long wavelength limit. It is highlighted that the spatial dispersion may tailor in unique ways the wave phenomena in wire met…
Strong diamagnetic response of wire medium with finite wire radius is reported. Contrary to the previous works where it was assumed that the wire medium exhibits only the electric response, we show that the non-zero magnetic susceptibility has to be taken into account for proper effective medium description of the wire medium. Analytical and numerical results are supported by the experimental measurements.
Anomalous optical coupling properties between two silicon wires in a silicon slot waveguide embedded in epsilon-near-zero (ENZ) metamaterials are proposed and demonstrated. The dependences of optical field enhancement in the slot region and transverse optical force on the slot size and the permittivity of surrounding material are studied in details. It is demonstrated that the optical field in the slot region is significantly enhanced due to the giant index contrast at the slot interface between silicon wires and ENZ metamaterials, but the optical mode coupling between silicon wires is greatly…
In this paper, we employ the novel design of the metamaterial half-wave plate by using the multiple layers of the metamaterials with some specific rotation angles. The rotation angles are given by composite pulse control which is the well-known quantum control technique. A big advantage of this method can analytically calculate the rotation angles and can be easily extended to the multiple layers. The more layers of the metamaterials can present more bandwidth of half-wave plate. In this paper, we present 1, 3, 5, 7 configurations of layers of a metamaterial half-wave plate and we demonstrate …
We theoretically and numerically investigate metamaterials composed of coupled resonators with indirect coupling. First, we theoretically analyze a mechanical model of coupled resonators with indirect coupling. The theoretical analysis shows that an electromagnetically induced transparency (EIT)-like phenomenon with a transparency bandwidth narrower than the resonance linewidths of the constitutive resonators can occur in the metamaterial with strong indirect coupling. We then numerically examine the characteristics of the metamaterial composed of coupled cut-wire pairs using a finite-differen…
We propose and investigate a new type of metamaterial structure composing of several interpenetrating wire meshes. Calculated band structures show that they exhibit index ellipsoids locating at nonzero k-point in long wavelength limit. We can comprehend these quasistatic modes by Poison's equation and find these modes do not rely on the detailed geometry of the wires but the connectivities of the wires. We can engineer the locations of index ellipsoid by designing the connectivities of the wire meshes.
Manipulation of radiation is required for enabling a span of electromagnetic applications. Since properties of antennas and scatterers are very sensitive to a surrounding environment, macroscopic artificially created materials are good candidates for shaping their characteristics. In particular, metamaterials enable controlling both dispersion and density of electromagnetic states, available for scattering from an object. As the result, properly designed electromagnetic environment could govern waves' phenomena. Here electromagnetic properties of scattering dipoles, situated inside a wire medi…
Infrared (IR) light is considered important for short-range wireless communication, thermal sensing, spectroscopy, material processing, medical surgery, astronomy etc. However, IR light is in general much harder to transport than optical light or microwave radiation. Existing hollow-core IR waveguides usually use a layer of metallic coating on the inner wall of the waveguide. Such a metallic layer, though reflective, still absorbs guided light significantly due to its finite Ohmic loss, especially for transverse-magnetic (TM) light. In this paper, we show that metal-wire based metamaterials ma…
We report single and multiband linear polarizers for terahertz (THz) frequencies using cut-wire metamaterials (MM). The MMs are designed by finite element method, fabricated by electron beam lithography, and characterized by THz time-domain spectroscopy. The MM unit cells consist of single or multiple length cut-wire pads of gold on semi-insulating Gallium Arsenide for single or multiple band polarizers. The dependence of the resonance frequency of the single band polarizer on the length of the cut-wires is explained based a transmission line model.
In this study, we present an approach to ultrasonic beamforming and high resolution identification of acoustic sources having critical implications for structural health monitoring technology. The proposed concept is based on the design of dynamically tailored structural elements via embedded acoustic metamaterial lenses. This approach provides a completely new alternative to conventional phased-array technology enabling the formation of steerable and collimated (or focused) ultrasonic beams by exploiting a single transducer. The ultrasonic beams can be steered by simply tuning the frequency o…
Asymmetric Negative Refraction in Nonlocal Double-Wire Metamaterials
Instituto de Telecomunicações and Department of Electrical and Computer Engineering, University of Coimbra（科英布拉大学电信研究所与电气与计算机工程系）；Photonics Initiative, Advanced Science Research Center, City University of New York（纽约市立大学高级科学研究中心光子学倡议项目）；Physics Program, The Graduate Center, City University of New York（纽约市立大学研究生院物理学项目）；University of Lisbon–Instituto Superior Técnico and Instituto de Telecomunicações（里斯本大学高等技术学院与电信研究所）
In the present paper, a half-wave plate (HWP) based on a birefringent metamaterial is numerically designed to operate in the visible range. The proposed structure consists of an array of double-pattern perpendicular rectangular aperture (RAA) engraved into opaque silver film deposited on a glass substrate. One of the apertures is glass filled. The operating principle of this plate is based on the excitation and the propagation of one guided mode inside each aperture but with different effective index. At the output side, a phase difference is obtained whose value mainly depends on the metal th…
Electromagnetic metamaterials, made from arrangements of subwavelength sized structures, can be used to manipulate radiation. Designing metamaterials that have a positive refractive index along one axis and a negative refractive index along the orthogonal axis can result in birefringences, $Δn>1$. The effect can be used to create wave plates with subwavelength thicknesses. Previous attempts at making wave plates in this way have resulted in very narrow usable bandwidths. In this paper, we use the Pancharatnam method to increase the usable bandwidth. A combination of Finite Element Method and T…
Recently, a new energy density formula for electromagnetic waves in the metamaterial consisting of arrays of conducting wires and split-ring-resonators (SRR) has been derived [Phys. Rev. E 80, 046601 (2009), arXiv:0909.1043]. According to that formula, the positiveness is obvious for the electric part of the energy density but not clear for the magnetic part. In this paper, I show that the magnetic energy density is also positively definite.
We design three-dimensional (3D) metallic nanowire media with different structures and numerically demonstrate that they can be homogeneous effective indefinite anisotropic media by showing that their dispersion relations are hyperbolic. For a finite slab, a nice fitting procedure is exploited to obtain the dispersion relations from which we retrieve the effective permittivities. The pseudo focusing for the real 3D wire medium agrees very well with the homogeneous medium having the effective permittivity tensor of the wire medium. Studies also show that in the long-wavelength limit, the hyperb…
Optical fields in metamaterial nanostructures can be separated into bright modes, whose dispersion is typically described by effective medium parameters, and dark fluctuating fields. Such combination of propagating and evanescent modes poses a serious numerical complication due to poorly conditioned systems of equations for the amplitudes of the modes. We propose a numerical scheme based on a transfer matrix approach, which resolves this issue for a parallel plate metal-dielectric metamaterial, and demonstrate its effectiveness.
Metamaterials possess artificial bulk and surface electromagnetic states. Tamed dispersion properties of surface waves allow one to achieve controllable super-Planckian radiative heat transfer (RHT) process between two closely spaced objects. We numerically demonstrate enhanced RHT between two 2D grooved metal plates by a full-wave scattering approach. The enhancement originates from both transverse magnetic spoof surface plasmon polaritons and a series of transverse electric bonding- and anti-bonding waveguide modes at surfaces. The RHT spectrum is frequency-selective, and highly geometricall…
It is well known that defining a local refractive index for a metamaterial requires that the wavelength be large with respect to the scale of its microscopic structure (generally the period). However, the converse does not hold. There are simple structures, such as the infinite, perfectly conducting wire medium, which remain non-local for arbitrarily large wavelength-to-period ratios. In this work we extend these results to the more realistic and relevant case of finite wire media with finite conductivity. In the quasi-static regime the metamaterial is described by a non-local permittivity whi…
We study theoretically the enhancement of spontaneous emission in wire metamaterials. We analyze the dependence of the Purcell factor dependence on wire dielectric constant for both electric and magnetic dipole sources, and find an optimal value of the dielectric constant for maximizing the Purcell factor for the electric dipole. We obtain analytical expressions for the Purcell factor and also provide estimates for the Purcell factor in realistic structures operating in both microwave and optical spectral range.
We introduce two types of toroidal metamaterials which are invisible to surface plasmon polaritons (SPPs) propagating on a metal surface. The former is a toroidal handlebody bridging remote holes on the metal surface: It works as a kind of plasmonic counterpart of electromagnetic wormholes. The latter is a toroidal ring lying on the metal surface: This bridges two disconnected metal surfaces i.e. It connects a thin metal cylinder to a flat metal surface with a hole. Full-wave numerical simulations demonstrate that an electromagnetic field propagating inside these metamaterials does not disturb…
Non-radiative coupling between conductive coils is a candidate mechanism for wireless energy transfer applications. In this paper, we propose a power relay system based on a near-field metamaterial superlens, and present a thorough theoretical analysis of this system. We use time-harmonic circuit formalism to describe all interactions between two coils attached to external circuits and a slab of anisotropic medium with homogeneous permittivity and permeability. The fields of the coils are found in the point-dipole approximation using Sommerfeld integrals, which are reduced to standard special …
We show that a metallic plate with fractal-shaped slits can be homogenitized as a plasmonic metamaterial with plasmon frequency dictated by the fractal geometry. Owing to the all-dimensional subwavelength nature of the fractal pattern, our system supports both transverse-electric and transverse-magnetic surface plasmons. As a result, this structure can be employed to focus light sources with all-dimensional subwavelength resolutions and enhanced field strengths. Microwave experiments reveal that the best achievable resolution is only, and simulations demonstrate that similar effects can be rea…
Coupled surface plasmon/phonon polaritons and hyperbolic modes are known to enhance radiative transport across nanometer vacuum gaps but usually require identical materials. It becomes crucial to achieve strong near-field energy transfer between dissimilar materials for applications like near-field thermophotovoltaic and thermal rectification. In this work, we theoretically demonstrate extraordinary near-field radiative transport between a nanostructured metamaterial emitter and a graphene-covered planar receiver. Strong near-field coupling with two orders of magnitude enhancement in the spect…
We propose a new class of metamaterials called magneto-optical metamaterials that offer enhanced angle of rotation in polarization compared to bulk magneto-optical materials. In the proposed approach, the permittivity tensor of a magneto-optical material is tailored by embedded wire meshes behaving as artificial plasma. We have shown that the angle of rotation in the magneto-optical metamaterial can be enhanced up to 9 times compared to bulk magneto-optical material alone while the polarization extinction ratio remains below -20dB and insertion loss is less than 1.5dB.
We study the properties of a tunable nonlinear metamaterial operating at microwave frequencies. We fabricate the nonlinear metamaterial composed of double split-ring resonators and wires where a varactor diode is introduced into each resonator so that the magnetic resonance can be tuned dynamically by varying the input power. We show that at higher powers the transmission of the metamaterial becomes power dependent, and we demonstrate experimentally power-dependent transmission properties and selective generation of higher harmonics.
We present an analytical model which permits the calculation of effective material parameters for planar metamaterials consisting of arbitrary unit cells (metaatoms) formed by a set of straight wire sections of potentially different shape. The model takes advantage of resonant electric dipole oscillations in the wires and their mutual coupling. The pertinent form of the metaatom determines the actual coupling features. This procedure represents a kind of building block model for quite different metaatoms. Based on the parameters describing the individual dipole oscillations and their mutual co…
Metamaterials are patterned metallic structures which permit access to a novel electromagnetic response, negative index of refraction, impossible to achieve with naturally occurring materials. Using the Babinet principle, the complementary split ring resonator (SRR) is etched in a metallic plate to provide negative ε, with perpendicular direction. Here we propose a new design, etched in a metallic plate to provide negative magnetic permeability μ, with perpendicular direction. The combined electromagnetic response of this planar metamaterial, where the negative μcomes from the aperture and the…
Metamaterials are artificially made sub-wavelength structures arranged in periodic arrays. They can be designed to interact with electromagnetic radiation in many different and interesting ways such as allowing radiation to experience a negative refractive index (NRI). We have used this technique to design and build a quasi-optical Half Wave Plate (HWP) that exhibits a large birefringence by virtue of having a positive refractive index in one axis and a NRI in the other. Previous implementations of such NRI-HWP have been narrow band ($\sim$1-3%) due to the inherent reliance on needing a resona…
Metamaterial-based perfect absorbers promise many applica- tions. Perfect absorption is characterized by the complete suppression of transmission and reflection and complete dissipation of the incident energy by the absorptive meta-atoms. A certain absorption spectrum is usually assigned to a bulk medium and serves as a signature of the respective material. Here we show how to use graphene flakes as building blocks for perfect absorbers. Then, an absorbing meta-atom only consists of a molecular monolayer placed at an appropriate distance from a metallic ground plate. We show that the functiona…
We report a new approach for the design and fabrication of thin wave plates with high transmission in the terahertz (THz) regime. The wave plates are based on strongly birefringent cut-wire pair metamaterials that exhibit refractive indices of opposite signs for two orthogonal polarization components of an incident wave. As specific examples, we fabricated and investigated a quarter- and a half-wave plate that revealed a peak intensity transmittance of 74% and 58% at 1.34 THz and 1.3 THz, respectively. Furthermore, the half wave plate displayed a maximum figure of merit (FOM) of 23 at 1.3 THz …
Controlling the electromagnetic properties of materials beyond those achievable with natural substances has become a reality with the advent of metamaterials, artificially designed materials offering a wide range of unusual physical phenomena. The extreme properties that metamaterials provide can protect optical and electromagnetic systems from surrounding ordinary materials and substances - a feature never explicitly used yet. Wireless energy transfer, i.e., the transmission of electromagnetic energy without physical connectors, demands reliable and stable solutions for charging high-power sy…
We designed a cut-wire-pair metasurface that works as a transparent terahertz half-wave plate, by matching the electric and magnetic resonances of the structure. Due to the impedance matching nature of the resonances, a large transmission phase shift between the orthogonal polarizations was achieved, while permitting a high transmission. The electric and magnetic responses of the proposed structure were confirmed by evaluating the electric admittance and magnetic impedance. The structure was fabricated on a flexible film and its helicity-conversion function in the terahertz frequency range was…
We develop a theory of nonlocal homogenization for metamaterial consisting of parallel metallic wires with dielectric coating. It is demonstrated that manipulation of dielectric contrast between wire dielectric shell and host material results in switching of metamaterial dispersion regime from elliptic to the hyperbolic one, i.e. the topological transition takes place. We confirm our theoretical predictions by full-wave numerical simulations.
CONTEXT.Large field-of-view imaging/polarimetry instruments operating at millimeter and submm wavelengths are fundamental tools to understand the role of magnetic fields (MF) in channeling filament material into prestellar cores providing a unique insight in the physics of galactic star-forming regions. Among other topics, at extra-galactic scales, polarization observations of AGNs will allow us to constrain the possible physical conditions of the emitting plasma from the jets and/or exploring the physics of dust inside supernova remnants. The kilo-pixel NIKA2 camera, installed at the IRAM 30-…
Recent advances in nano-fabrication techniques allow for the manufacture of optical metamaterials, bringing their unique and extra-ordinary properties to the visible regime and beyond. However, an analytical description of optical nano-plasmonic metamaterials is challenging due to the characteristic optical behaviour of metals. Here we present an analytical theory that allows to bring established microwave metamaterials models to optical wavelengths. This method is implemented for nano-scaled plasmonic wire-mesh and tri-helical metamaterials, and we obtain an accurate prediction for their disp…
A bilayered chiral metamaterial (CMM) is proposed to realize a 90 degree polarization rotator, whose giant optical activity is due to the transverse magnetic dipole coupling among the metallic wire pairs of enantiomeric patterns. By transmission through this thin bilayered structure of less than λ/30 thick, a linearly polarized wave is converted to its cross polarization with a resonant polarization conversion efficiency (PCE) of over 90%. Meanwhile, the axial ratio of the transmitted wave is better than 40 dB. It is demonstrated that the chirality in the propagation direction makes this effic…
We investigate numerically the use of a negative-permeability "perfect lens" for enhancing wireless power transfer between two current carrying coils. The negative permeability slab serves to focus the flux generated in the source coil to the receiver coil, thereby increasing the mutual inductive coupling between the coils. The numerical model is compared with an analytical theory that treats the coils as point dipoles separated by an infinite planar layer of magnetic material [Urzhumov et al., Phys. Rev. B, 19, 8312 (2011)]. In the limit of vanishingly small radius of the coils, and large wid…
Optical properties of a metasurface which can be considered a monolayer of two classical uniaxial metamaterials, parallel-plate and nanorod arrays, are investigated. It is shown that such metasurface acts as an ultimately thin sub-50 nm wave plate. This is achieved via an interplay of epsilon-near-zero and epsilon-near-pole behavior along different axes in the plane of the metasurface allowing for extremely rapid phase difference accumulation in very thin metasurface layers. These effects are shown to not be disrupted by non-locality and can be applied to the design of ultrathin wave plates, P…
Electromagnetic waves in vacuum and most materials have transverse polarization. Longitudinal electromagnetic waves with electric field parallel to wave vector are very rare and appear under special conditions in a limited class of media, for example in plasma. In this work, we study the dispersion properties of an easy-to-manufacture metamaterial consisting of two three-dimensional cubic lattices of connected metallic wires inserted one into another, also known as an interlaced wire medium. It is shown that the metamaterial supports longitudinal waves at extremely wide frequency band from ver…
