The phenomenon of apparent slip in micro-channel flows is analyzed by means of a two-phase mesoscopic lattice Boltzmann model including non-ideal fluid-fluid and fluid-wall interactins. The weakly-inhomogeneous limit of this model is solved analytically.
The present mesoscopic approach permits to access much larger scales than molecular dynamics, and comparable with those attained by continuum methods. However, at variance with the continuum approach, the existence of a gas layer near the wall does not need to be postulated a priori, but emerges naturally from the underlying non-ideal mesoscopic dynamics. It is therefore argued that a mesoscopic Lattice Boltzmann approach with non-ideal fluid-fluid and fluid-wall interactions might achieve an optimal compromise between physical realism and computational efficiency for the study of channel micro-flows.
We present a mesoscopic model of the fluid-wall interactions for flows in microchannel geometries. We define a suitable implementation of the boundary conditions for a discrete version of the Boltzmann equations describing a wall-bounded single phase fluid. We distinguish different slippage properties on the surface by introducing a slip function, defining the local degree of slip for mesoscopic molecules at the boundaries. The slip function plays the role of a renormalizing factor which incorporates, with some degree of arbitrariness, the microscopic effects on the mesoscopic description. We …
We consider pressure-driven flows of electrolyte solutions in small channels or capillaries in which tracer particles are used to probe velocity profiles. Under the assumption that the double layer is thin compared to the channel dimensions, we show that the flow-induced streaming electric field can create an apparent slip velocity for the motion of the particles, even if the flow velocity still satisfies the no-slip boundary condition. In this case, tracking of particle would lead to the wrong conclusion that the no-slip boundary condition is violated. We evaluate the apparent slip length, co…
We present a model based on the lattice Boltzmann equation that is suitable for the simulation of dynamic wetting. The model is capable of exhibiting fundamental interfacial phenomena such as weak adsorption of fluid on the solid substrate and the presence of a thin surface film within which a disjoining pressure acts. Dynamics in this surface film, tightly coupled with hydrodynamics in the fluid bulk, determine macroscopic properties of primary interest: the hydrodynamic slip; the equilibrium contact angle; and the static and dynamic hysteresis of the contact angles. The pseudo- potentials em…
Recent experiments (Zhu & Granick (2001) Phys. Rev. Lett. 87 096105) have measured a large shear dependent fluid slip at partially wetting fluid-solid surfaces. We present a simple model for such slip, motivated by the recent observations of nanobubbles on hydrophobic surfaces. The model considers the dynamic response of bubbles to change in hydrodynamic pressure due to the oscillation of a solid surface. Both the compression and diffusion of gas in the bubbles decrease the force on the oscillating surface by a ``leaking mattress'' effect, thereby creating an apparent shear-dependent slip. Wit…
We review recent dissipative particle dynamics (DPD) simulations of electrolyte flow in nanochannels. A method is presented by which the slip length $delta_B$ at the channel boundaries can be tuned systematically from negative to infinity by introducing suitably adjusted wall-fluid friction forces. Using this method, we study electroosmotic flow (EOF) in nanochannels for varying surface slip conditions and fluids of different ionic strength. Analytic expressions for the flow profiles are derived from the Stokes equation, which are in good agreement with the numerical results. Finally, we inves…
In this paper, we applied the Shan-Chen multiphase Lattice Boltzmann method to simulate two different parameters, contact angle (a static parameter) and slip length (a dynamic parameter), and we proposed a relationship between them by fitting those numerical simulation results. By changing the values of the strength of interaction between fluid particles (SIF) and the strength of interaction between fluid and solid surface (SIFS), we simulated a series of contact angles and slip lengths. Our numerical simulation results show that both SIF and SIFS have little effects on the relationship betwee…
Various experiments have found a boundary slip in hydrophobic microchannel flows, but a consistent understanding of the results is still lacking. While Molecular Dynamics (MD) simulations cannot reach the low shear rates and large system sizes of the experiments, it is often impossible to resolve the needed details with macroscopic approaches. We model the interaction between hydrophobic channel walls and a fluid by means of a multi-phase lattice Boltzmann model. Our mesoscopic approach overcomes the limitations of MD simulations and can reach the small flow velocities of known experiments. We…
Substantial experimental, theoretical, as well as numerical effort has been invested to understand the effect of boundary slippage in microfluidic devices. However, even though such devices are becoming increasingly important in scientific, medical, and industrial applications, a satisfactory understanding of the phenomenon is still lacking. This is due to the extremely precise experiments needed to study the problem and the large number of tunable parameters in such systems. In this paper we apply a recently introduced algorithm to implement hydrophobic fluid-wall interactions in the lattice …
The ubiquitous wall slip behavior of viscoplastic fluids renders the analysis of their steady torsional flow data to determine their yield stress and other parameters of their shear viscosity material function challenging. Roughened surfaces to prevent wall slip can be used but such methods frequently result in the fracturing of the sample. Instead, it is shown here that the yield stress of a viscoplastic fluid can be determined from the torque versus apparent shear rate data of steady torsional flow using a single gap. The step change in the slope of the torque versus apparent shear rate data…
We present a mesoscopic model, based on the Boltzmann Equation, for the interaction between a solid wall and a non-ideal fluid. We present an analytic derivation of the contact angle in terms of the surface tension between the liquid-gas, the liquid-solid and the gas-solid phases. We study the dependency of the contact angle on the two free parameters of the model, which determine the interaction between the fluid and the boundaries, i.e. the equivalent of the wall density and of the wall-fluid potential in Molecular Dynamics studies. We compare the analytical results obtained in the hydrodyna…
Hydrogels are widely used in myriad applications including those in the biomedical and personal care fields. It is generally the rheology, i.e., the flow and deformation properties, of hydrogels that define their functionalities. However, the ubiquitous viscoplasticity and associated wall slip behavior of hydrogels handicap the accurate characterization of their rheological material functions. Here parallel-disk and cone-and-plate viscometers were used to characterize the shear viscosity and wall slip behavior of a crosslinked poly(acrylic acid), PAA, hydrogel (carbomer, specifically Carbopol)…
Surface roughness becomes relevant if typical length scales of the system are comparable to the scale of the variations as it is the case in microfluidic setups. Here, an apparent boundary slip is often detected which can have its origin in the assumption of perfectly smooth boundaries. We investigate the problem by means of lattice Boltzmann (LB) simulations and introduce an ``effective no-slip plane'' at an intermediate position between peaks and valleys of the surface. Our simulations show good agreement with analytical results for sinusoidal boundaries, but can be extended to arbitrary geo…
Liquid slip flow with a Knudsen number Kn = 0.001-0.1 plays a dominant role in confined flow channels. Its physical origin can be attributed to the intermolecular fluid-solid (F-S) interaction force. To this end, we propose herein continuous force functions (decaying either exponentially or by a power law) between fluid particles and two confined flat walls in the framework of the mesoscopic lattice Boltzmann model (LBM). The analytical solutions for density profile, velocity profile, slip length, and permeability ratio are derived and related to the mesoscale F-S interaction parameters and th…
In a recent paper by Lasseux, Valdés-Parada and Porter (J.~Fluid~Mech. \textbf{805} (2016) 118-146), it is found that the apparent gas permeability of the porous media is a nonlinear function of the Knudsen number. However, this result is highly questionable, because the adopted Navier-Stokes equations and the first-order velocity-slip boundary condition are first-order (in terms of the Knudsen number) approximations of the Boltzmann equation and the kinetic boundary condition for rarefied gas flows. Our numerical simulations based on the Bhatnagar-Gross-Krook kinetic equation and regularized …
Apparent liquid permeability (ALP) in ultra-confined permeable media is primarily governed by the pore confinement and fluid-rock interactions. A new ALP model is required to predict the interactive effect of the above two on the flow in mixed-wet, heterogeneous nanoporous media. This study derives an ALP model and integrates the compiled results from molecular dynamics (MD) simulations, scanning electron microscopy, atomic force microscopy, and mercury injection capillary pressure. The ALP model assumes viscous forces, capillary forces, and liquid slippage in tortuous, rough pore throats. Pre…
An approach based on a lattice version of the Boltzmann kinetic equation for describing multi-phase flows in nano- and micro-corrugated devices is proposed. We specialize it to describe the wetting/dewetting transition of fluids in presence of nanoscopic grooves etched on the boundaries. This approach permits to retain the essential supra-molecular details of fluid-solid interactions without surrendering -actually boosting- the computational efficiency of continuum methods. The mesoscopic method is first validated quantitatively against Molecular Dynamics (MD) results of Cottin-Bizonne et al. …
In this contribution we review recent efforts on investigations of the effect of (apparent) boundary slip by utilizing lattice Boltzmann simulations. We demonstrate the applicability of the method to treat fundamental questions in microfluidics by investigating fluid flow in hydrophobic and rough microchannels as well as over surfaces covered by nano- or microscale gas bubbles.
We analyze the role of boundary geometry in viscous electronic hydrodynamics. We address the twin questions of how boundary geometry impacts flow profiles, and how one can engineer boundary conditions -- in particular the effective slip parameter -- to manipulate the flow in a controlled way. We first propose a micropatterned geometry involving finned barriers, for which we show by an explicit solution that one can obtain effectively no-slip boundary conditions regardless of the detailed microscopic nature of the channel surface. Next we analyse the role of mesoscopic boundary curvature on the…
Dissipative particle dynamics (DPD) is an effective mesoscopic particle model with a lower computational cost than molecular dynamics because of the soft potentials that it employs. However, the soft potential is not strong enough to prevent the DPD particles that are used to represent the fluid from penetrating solid boundaries represented by stationary DPD particles. A phase field variable, , is used to indicate the phase at point and time t, with a smooth transition from -1 (phase 1) to +1 (phase 2) across the interface. We describe an efficient implementation of no-slip boundary conditions…
Superhydrophobic surfaces have been shown to produce significant drag reduction in both laminar and turbulent flows by introducing an apparent slip velocity along an air-water interface trapped within the surface roughness. In the experiments presented within this study, we demonstrate the existence of a surface tension gradient associated with the resultant Marangoni flow along an air-water interface that causes the slip velocity and slip length to be significantly reduced. In this study, the slip velocity along a millimeter-sized air-water interface was investigated experimentally. This larg…
This work investigates electroviscous effects in presence of charge-dependent slip in steady pressure-driven laminar flow of a symmetric (1:1) electrolyte liquid through a uniformly charged slit contraction - expansion (4:1:4) microfluidic device. The mathematical model comprising Poisson's, Nernst-Planck, Navier-Stokes, and current continuity equations are solved numerically using finite element method (FEM). The flow fields (electrical potential, charge, induced electric field strength, pressure drop, and electroviscous correction factor) have been obtained and presented for a wide range of …
The paper addresses the hydrodynamic behavior of a sphere close to a micro-patterned superhydrophobic surface described in terms of alternated no-slip and perfect-slip stripes. Physically, the perfect-slip stripes model the parallel grooves where a large gas cushion forms between fluid and solid wall, giving rise to slippage at the gas-liquid interface. The potential of the boundary element method (BEM) in dealing with mixed no-slip/perfect-slip boundary conditions is exploited to systematically calculate the mobility tensor for different particle-to-wall relative positions and for different p…
The interpolated bounce-back scheme and the immersed boundary method are the two most popular algorithms in treating a no-slip boundary on curved surfaces in the lattice Boltzmann method. While those algorithms are frequently implemented in the numerical simulations involving complex geometries, such as particle-laden flows, their performances are seldom compared systematically over the same local quantities within the same context. In this paper, we present a systematic comparative investigation on some frequently used and most state-of-the-art interpolated bounce-back schemes and immersed bo…
We conduct direct simulations of turbulent channels imposing different virtual origins for all three velocities using Robin, slip-like boundary conditions to study the effect of displacing the origins perceived by different flow components, a mechanism common to small-textured surfaces. We also explore this effect using opposition control. For riblets, Luchini et al. (1991) proposed that their effect could be reduced to the offset between the streamwise- and spanwise-velocity origins, the latter being the origin perceived by turbulence. Later results on superhydrophobic surfaces suggest that t…
Swimming cells often have to self-propel through fluids displaying non-Newtonian rheology. While past theoretical work seems to indicate that stresses arising from complex fluids should systematically hinder low-Reynolds number locomotion, experimental observations suggest that locomotion enhancement is possible. In this paper we propose a physical mechanism for locomotion enhancement of microscopic swimmers in a complex fluid. It is based on the fact that micro-structured fluids will generically phase-separate near surfaces, leading to the presence of low-viscosity layers which promote slip a…
We use interface-resolved simulations to study finite-size effects in turbulent channel flow of neutrally-buoyant spheres. Two cases with particle sizes differing by a factor of 2, at the same solid volume fraction of 20% and bulk Reynolds number are considered. These are complemented with two reference single-phase flows: the unladen case, and the flow of a Newtonian fluid with the effective suspension viscosity of the same mixture in the laminar regime. As recently highlighted in Costa et al. (PRL 117, 134501), a particle-wall layer is responsible for deviations of the statistics from what i…
In this paper, a unified theory of internal bores and gravity currents is presented within the framework of the one-dimensional two-layer shallow-water equations. The equations represent four basic physical laws: the theory is developed on the basis of these laws. Though the first three of the four basic laws are apparent, the forth basic law has been uncertain. This paper shows first that this forth basic law can be deduced from the law which is called in this paper the conservation law of circulation. It is then demonstrated that, within the framework of the equations, an internal bore is re…
Gas slippage occurs when the mean free path of the gas molecules is in the order of the characteristic pore size of a porous medium. This phenomenon leads to the Klinkenberg's effect where the measured permeability of a gas (apparent permeability) is higher than that of the liquid (intrinsic permeability). A generalized lattice Boltzmann model is proposed for flow through porous media that includes Klinkenberg's effect, which is based on the model of Guo et al. (Z.L. Guo et al., Phys.Rev.E 65, 046308 (2002)). The second-order Beskok and Karniadakis-Civan's correlation (A. Beskok and G. Karniad…
