In the case of an external Hamiltonian at most quadratic in position and momentum operators, we use the ABCD formulation of atom optics to establish an exact analytical phase shift expression for atom interferometers with arbitrary spatial or temporal beam splitter configurations. This result is expressed in terms of coordinates and momenta of the wave packet centers at the interaction vertices only.
We propose a technique, using interferometry of Bose-Einstein condensed alkali atoms, for the detection of sub-micron-range forces. It may extend present searches at 1 micron by 6 to 9 orders of magnitude, deep into the theoretically interesting regime of 1000 times gravity. We give several examples of both four-dimensional particles (moduli), as well as higher-dimensional particles -- vectors and scalars in a large bulk-- that could mediate forces accessible by this technique.
We propose an atom-interferometry experiment based on the scalar Aharonov-Bohm effect which detects an atom charge at the 10^{-28}e level, and improves the current laboratory limits by 8 orders of magnitude. This setup independently probes neutron charges down to 10^{-28}e, 7 orders of magnitude below current bounds.
The light-pulse atom interferometry method is reviewed. Applications of the method to inertial navigation and tests of the Equivalence Principle are discussed.
We apply a Bloch-bands approach to the analysis of pulsed optical standing wave diffractive elements in optics and interferometry with ultracold atoms. We verify our method by comparison to a series of experiments with Bose-Einstein condensates. The approach provides accurate Rabi frequencies for diffraction pulses and is particularly useful for the analysis and control of diffraction phases, an important systematic effect in precision atom interferometry. Utilizing this picture, we also demonstrate a method to determine atomic band structure in an optical lattice through a measurement of phas…
In precision metrology the determination of the Newtonian gravity constant $G$ represents a real problem, since its history is plagued by huge unknown discrepancies between a large number of independent experiments. In this paper we propose a novel experimental setup for measuring $G$ with a relative accuracy of $10^{-5}$ using a standard cold atomic fountain and matter wave interferometry. We discuss in details the major sources of systematic errors, providing also the expected statistical uncertainty. Feasibility of determining $G$ at a level of $10^{-6}$ level is also discussed.
A frequency doubled I/Q modulator based optical single-sideband (OSSB) laser system is demonstrated for atomic physics research, specifically for atom interferometry where the presence of additional sidebands causes parasitic transitions. The performance of the OSSB technique and the spectrum after second harmonic generation are measured and analyzed. The additional sidebands are removed with better than 20 dB suppression, and the influence of parasitic transitions upon stimulated Raman transitions at varying spatial positions is shown to be removed beneath experimental noise. This technique w…
We present a local measurement of gravity combining Bloch oscillations and atom interferometry. With a falling distance of 0.8 mm, we achieve a sensitivity of 2x10-7 g with an integration time of 300 s. No bias associated with the Bloch oscillations has been measured. A contrast decay with Bloch oscillations has been observed and attributed to the spatial quality of the laser beams. A simple experimental configuration has been adopted where a single retro-reflected laser beam is performing atoms launch, stimulated Raman transitions and Bloch oscillations. The combination of Bloch oscillations …
A compact and robust laser system for atom interferometry based on a frequency-doubled telecom laser is presented. Thanks to an original stabilization architecture on a saturated absorption setup, we obtain a frequency-agile laser system allowing fast tuning of the laser frequency over 1 GHz in few ms using a single laser source. The different laser frequencies used for atom interferometry are generated by changing dynamically the frequency of the laser and by creating sidebands using a phase modulator. A laser system for Rubidium 87 atom interferometry using only one laser source based on a f…
In the field of cold atom inertial sensors, we present and analyze innovative configurations for improving their measurement range and sensitivity, especially attracting for onboard applications. These configurations rely on multi-species atom interferometry, involving the simultaneous manipulation of different atomic species in a unique instrument to deduce inertial measurements. Using a dual-species atom accelerometer manipulating simultaneously both isotopes of rubidium, we report a preliminary experimental realization of original concepts involving the implementation of two atom interferom…
We present a compact $^{87}$Rb atomic source for high precision dual atom interferometers. The source is based on a double-stage magneto-optical trap (MOT) design, consisting of a 2-dimensional (2D)-MOT for efficient loading of a 3D-MOT. The accumulated atoms are precisely launched in a horizontal moving molasses. Our setup generates a high atomic flux ($>10^{10}$ atoms/s) with precise and flexibly tunable atomic trajectories as required for high resolution Sagnac atom interferometry. We characterize the performance of the source with respect to the relevant parameters of the launched atoms, i…
We compare expressions for the atom interferometer phase obtained using the path integral approach and the approach based on the density matrix equation in the Wigner representation. The power series of these expressions over the Planck constant, truncated to the $\hbar ^{2}$ term, coincide. This coincidence is achieved only after the $Q-$term is included.
We use Bloch oscillations to transfer coherently many photon momenta to atoms. Then we can measure accurately the recoil velocity $\hbar k/m$ and deduce the fine structure constant $α$. The velocity variation due to Bloch oscillations is measured using atom interferometry. This method yields to a value of the fine structure constant $α^{-1}= 137.035 999 45 (62)$ with a relative uncertainty of about $4.5 \times 10^{-9}$.
We provide an introduction into the field of atom optics and review our work on interferometry with cold atoms, and in particular with Bose-Einstein condensates. Here we emphasize applications of atom interferometry with sources of this kind. We discuss tests of the equivalence principle, a quantum tiltmeter, and a gravimeter.
We propose a new scheme for an improved determination of the Newtonian gravitational constant G and evaluate it by numerical simulations. Cold atoms in free fall are probed by atom interferometry measurements to characterize the gravitational field generated by external source masses. Two source mass configurations having different geometry and using different materials are compared to identify an optimized experimental setup for the G measurement. The effects of the magnetic fields used to manipulate the atoms and to control the interferometer phase are also characterized.
We propose a marginally stable optical resonator suitable for atom interferometry. The resonator geometry is based on two flat mirrors at the focal planes of a lens that produces the large beam waist required to coherently manipulate cold atomic ensembles. Optical gains of about 100 are achievable using optics with part-per-thousand losses. The resulting power build-up will allow for enhanced coherent manipulation of the atomic wavepackets such as large separation beamsplitters. We study the effect of longitudinal misalignments and assess the robustness of the resonator in terms of intensity a…
We here present a high sensitivity gravity-gradiometer based on atom interferometry. In our apparatus, two clouds of laser-cooled rubidium atoms are launched in fountain configuration and interrogated by a Raman interferometry sequence to probe the gradient of gravity field. We recently implemented a high-flux atomic source and a newly designed Raman lasers system in the instrument set-up. We discuss the applications towards a precise determination of the Newtonian gravitational constant G. The long-term stability of the instrument and the signal-to-noise ratio demonstrated here open interesti…
In this paper we present a short overview of atom interferometry based on light pulses. We discuss different implementations and their applications for high precision measurements. We will focus on the determination of the ratio h/m of the Planck constant to an atomic mass. The measurement of this quantity is performed by combining Bloch oscillations of atoms in a moving optical lattice with a Ramsey-Bordé interferometer.
In quantum interferometry, it is vital to control and utilize nonlinear interactions for achieving high-precision measurements. Attribute to their long coherent time and high controllability, ultracold atoms including Bose condensed atoms have been widely used for implementing quantum interferometry. Here, we review the recent progresses in theoretical studies of quantum interferometry with Bose condensed atoms. In particular, we focus on the nonlinear phenomena induced by the atom-atom interaction and how to control and utilize these nonlinear phenomena. Under the mean-field description, due …
Considered contribution to the phase of the atom interferometer caused by the gravity field of the massive proof mass. Demonstrated the method of finding the extrema of this contribution for 100kg Tungsten proof mass of the specific shape and specific parameters of $^{133}Cs$ atom interferometers. Calculated variations of the double difference response under the small deviations of atomic and proof mass variables. The choice of the extremal values of the atomic variables allows one to release requirements for atom positioning on 2 orders of magnitude.
We demonstrate a standing wave light pulse sequence that places atoms into a superposition of displaced wavepackets with precisely controlled displacements that remain constant for times as long as 1 s. The separated wavepackets are subsequently recombined resulting in atom interference patterns that probe energy differences of approximately 10^-34 J, and can provide acceleration measurements that are insensitive to platform vibrations.
We describe an optical bench in which we lock the relative frequencies or phases of a set of three lasers in order to use them in a cold atoms interferometry experiment. As a new feature, the same two lasers serve alternately to cool atoms and to realize the atomic interferometer. This requires a fast change of the optical frequencies over a few GHz. The number of required independent laser sources is then only 3, which enables the construction of the whole laser system on a single transportable optical bench. Recent results obtained with this optical setup are also presented.
We demonstrate matterwave interference in a warm vapor of rubidium atoms. Established approaches to light pulse atom interferometry rely on laser cooling to concentrate a large ensemble of atoms into a velocity class resonant with the atom optical light pulse. In our experiment, we show that clear interference signals may be obtained without laser cooling. This effect relies on the Doppler selectivity of the atom interferometer resonance. This interferometer may be configured to measure accelerations, and we demonstrate that multiple interferometers may be operated simultaneously by addressing…
Point source atom interferometry (PSI) uses the velocity distribution in a cold atom cloud to simultaneously measure one axis of acceleration and two axes of rotation from the phase, orientation, and period of atomic interference fringe images. For practical applications in inertial sensing and precision measurement, it is important to be able to measure a wide range of system rotation rates, corresponding to interferograms with far less than one full interference fringe to very many fringes. The interferogram analysis techniques used previously for PSI are not sensitive to low rotation rates,…
Inertial sensors based on cold atoms have great potential for navigation, geodesy, or fundamental physics. Similar to the Sagnac effect, their sensitivity increases with the space-time area enclosed by the interferometer. Here, we introduce twin-lattice atom interferometry exploiting Bose-Einstein condensates. Our method provides symmetric momentum transfer and large areas in palm-sized sensor heads with a performance similar to present meter-scale Sagnac devices.
We present a compact and stable dual-wavelength laser source for onboard atom interferometry with two different atomic species. It is based on frequency-doubled telecom lasers locked on a femtosecond optical frequency comb. We take advantage of the maturity of fiber telecom technology to reduce the number of free-space optical components which are intrinsically less stable, and to make the setup immune to vibrations and thermal fluctuations. The source provides the frequency agility and phase stability required for atom interferometry and can easily be adapted to other cold atom experiments. W…
Do van der Waals interactions determine the smallest nanostructures that can be used for atom optics? This question is studied with regard to the problem of designing an atom interferometer with optimum sensitivity to de Broglie wave phase shifts. The optimum sensitivity to acceleration and rotation rates is also considered. For these applications we predict that nanostructures with a period smaller than 40 nm will cause atom interferometers to perform poorly because van der Waals interactions adversely affect how nanostructure gratings work as beam-splitters.
We theoretically study a scheme to develop an atomic based MW interferometry using the Rydberg states in Rb. Unlike the traditional MW interferometry, this scheme is not based upon the electrical circuits, hence the sensitivity of the phase and the amplitude/strength of the MW field is not limited by the Nyquist thermal noise. Further this system has great advantage due to its very high bandwidth, ranging from radio frequency (RF), micro wave (MW) to terahertz regime. In addition, this is \textbf{orders of magnitude} more sensitive to field strength as compared to the prior demonstrations on t…
Developments in atom interferometry have led to atomic inertial sensors with extremely high sensitivity. Their performances are for the moment limited by the ground vibrations, the impact of which is exacerbated by the sequential operation, resulting in aliasing and dead time. We discuss several experiments performed at LNE-SYRTE in order to reduce these problems and achieve the intrinsic limit of atomic inertial sensors. These techniques have resulted in transportable and high-performance instruments that participate in gravity measurements, and pave the way to applications in inertial naviga…
We present the perspective of using atom interferometry for gravitational wave (GW) detection in the mHz to about 10 Hz frequency band. We focus on light-pulse atom interferometers which have been subject to intense developments in the last 25 years. We calculate the effect of the GW on the atom interferometer and present in details the atomic gradiometer configuration which has retained more attention recently. The principle of such a detector is to use free falling atoms to measure the phase of a laser, which is modified by the GW. We highlight the potential benefits of using atom interferom…
We propose and demonstrate a scheme to enable Doppler compensation within optical cavities for atom interferometry at significantly increased mode diameters. This has the potential to overcome the primary limitations in cavity enhancement for atom interferometry, circumventing the cavity linewidth limit and enabling mode filtering, power enhancement, and a large beam diameter simultaneously. This approach combines a magnified linear cavity with an intracavity Pockels cell. The Pockels cell introduces a voltage tunable birefringence allowing the cavity mode frequencies to track the Raman lasers…
We present the first direct measurement of the gravity-field curvature based on three conjugated atom interferometers. Three atomic clouds launched in the vertical direction are simultaneously interrogated by the same atom interferometry sequence and used to probe the gravity field at three equally spaced positions. The vertical component of the gravity-field curvature generated by nearby source masses is measured from the difference between adjacent gravity gradient values. Curvature measurements are of interest in geodesy studies and for the validation of gravitational models of the surround…
A cold atom interferometer is being developed using 85Rb atoms towards a search for the dark contents of the vacuum, and as a test stand for inertial sensing applications. Here we outline the current status of the experiment and report the observation of Ramsey interference fringes in the apparatus.
Atom interferometry using stimulated Raman transitions in a retroreflected configuration is the first choice in high precision measurements because it provides low phase noise, high quality Raman wavefront and simple experimental setup. However, it cannot be used for atoms at zero velocity because two pairs of Raman lasers are simultaneously resonant. Here we report a method which allows to lift this degeneracy by using a frequency chirp on the Raman lasers. Using this technique, we realize a Mach-Zehnder atom interferometer hybridized with a force balanced accelerometer which provides horizon…
We apply optical pumping to prepare the lithium beam of our atom interferometer in a single hyperfine-Zeeman sublevel: we use two components of the D1-line for pumping the 7Li atoms in a dark state F,mF=+2 (or -2) sublevel. The optical pumping efficiency has been characterized by two techniques: state-selective laser atom deflection or magnetic dephasing of the atom interferometer signals. The first technique has not achieved a high sensitivity, because of a limited signal to noise ratio, but magnetic dephasing signals have shown that about 95% of the population has been transferred in the aim…
We have developed an atom interferometer providing a full inertial base. This device uses two counter-propagating cold-atom clouds that are launched in strongly curved parabolic trajectories. Three single Raman beam pairs, pulsed in time, are successively applied in three orthogonal directions leading to the measurement of the three axis of rotation and acceleration. In this purpose, we introduce a new atom gyroscope using a butterfly geometry. We discuss the present sensitivity and the possible improvements.
We propose and demonstrate a method to increase the momentum separation between the arms of an atom interferometer and thus its area and measurement precision, by using Bloch oscillations (BOs) in an excited band of a pulsed optical standing wave lattice. Using excited bands allows us to operate at particular "magic" depths, where high momentum transfer efficiency ($>99.4\%$ per $\hbar k$, where $\hbar k$ is the photon momentum) is maintained while minimizing the lattice-induced phase fluctuations ($<1\,$milliradian per $\hbar k$) that are unavoidable in ground-band BOs. We apply this method t…
We show that light-pulse atom interferometry with atomic point sources and spatially resolved detection enables multi-axis (two rotation, one acceleration) precision inertial sensing at long interrogation times. Using this method, we demonstrate a light-pulse atom interferometer for Rb-87 with 1.4 cm peak wavepacket separation and a duration of 2T = 2.3 seconds. The inferred acceleration sensitivity of each shot is 6.7 * 10^(-12) g, which improves on previous limits by more than two orders of magnitude. We also measure the Earth's rotation rate with a precision of 200 nrad/s.
We present here a simple laser system for a laser cooled atom interferometer, where all functions (laser cooling, interferometry and detection) are realized using only two extended cavity laser diodes, amplified by a common tapered amplifier. One laser is locked by frequency modulation transfer spectroscopy, the other being phase locked with an offset frequency determined by an Field-Programmable Gate Array (FPGA) controlled Direct Digital Synthesizer (DDS), which allows for efficient and versatile tuning of the laser frequency. Raman lasers are obtained with a double pass acousto-optic modula…
We theoretically investigate the dynamics of a gas of strongly interacting Rydberg atoms subject to a time-domain Ramsey interferometry protocol. The many-body dynamics is governed by an Ising-type Hamiltonian with long range interactions of tunable strength. We analyze and model the contrast degradation and phase accumulation of the Ramsey signal and identify scaling laws for varying interrogation times, ensemble densities, and ensemble dimensionalities.
We report the first realization of large momentum transfer (LMT) clock atom interferometry. Using single-photon interactions on the strontium ${}^1S_0 - {}^3P_1$ transition, we demonstrate Mach-Zehnder interferometers with state-of-the-art momentum separation of up to $141\,\hbar k$ and gradiometers of up to $81\,\hbar k$. Moreover, we circumvent excited state decay limitations and extend the gradiometer duration to 50 times the excited state lifetime. Because of the broad velocity acceptance of the interferometry pulses, all experiments are performed with laser-cooled atoms at a temperature o…
We developed a gravity-gradiometer based on atom interferometry for the determination of the Newtonian gravitational constant \textit{G}. The apparatus, combining a Rb fountain, Raman interferometry and a juggling scheme for fast launch of two atomic clouds, was specifically designed to reduce possible systematic effects. We present instrument performances and show that the sensor is able to detect the gravitational field induced by source masses. A discussion of projected accuracy for \textit{G} measurement using this new scheme shows that the results of the experiment will be significant to …
In Paris, we are using an atom interferometer to precisely measure the recoil velocity of an atom that absorbs a photon. In order to reach a high sensitivity, many recoils are transferred to atoms using the Bloch oscillations technique. In this lecture, I will present in details this technique and its application to high precision measurement. I will especially describe in details how this method allows us to perform an atom recoil measurement at the level of $1.3 \times 10^{-9}$. This measurement is used in the most precise determination of the fine structure constant that is independent of q…
We present a diode laser system optimized for laser cooling and atom interferometry with ultra-cold rubidium atoms aboard sounding rockets as an important milestone towards space-borne quantum sensors. Design, assembly and qualification of the system, combing micro-integrated distributed feedback (DFB) diode laser modules and free space optical bench technology is presented in the context of the MAIUS (Matter-wave Interferometry in Microgravity) mission. This laser system, with a volume of 21 liters and total mass of 27 kg, passed all qualification tests for operation on sounding rockets and i…
We present here a new method based on a transfer of population by adiabatic passage that allows to prepare cold atomic samples with a well defined ratio of atomic density and atom number. This method is used to perform a measurement of the cold collision frequency shift in a laser cooled cesium clock at the percent level, which makes the evaluation of the cesium fountains accuracy at the $10^{-16}$ level realistic. With an improved set-up, the adiabatic passage would allow measurements of atom number-dependent phase shifts at the $10^{-3}$ level in high precision experiments.
We characterize the performance of a gravimeter and a gravity gradiometer based on the $^{1}$S$_{0}$-$^3$P$_0$ clock transition of strontium atoms. We use this new quantum sensor to measure the gravitational acceleration with a relative sensitivity of $1.7\times10^{-5}$, representing the first realisation of an atomic interferometry gravimeter based on a single-photon transition. Various noise contributions to the gravimeter are measured and characterized, with the current primary limitation to sensitivity seen to be the intrinsic noise of the interferometry laser itself. In a gravity gradiome…
Atom interferometers are promising tools for precision measurement with applications ranging from geophysical exploration to tests of the equivalence principle of general relativity, or the detection of gravitational waves. Their optimal sensitivity is ultimately limited by their detection noise. We review resonant and near-resonant methods to detect the atom number of the interferometer outputs and we theoretically analyze the relative influence of various scheme dependent noise sources and the technical challenges affecting the detection. We show that for the typical conditions under which a…
The unprecedented precision of atom interferometry will soon lead to laboratory tests of general relativity to levels that will rival or exceed those reached by astrophysical observations. We propose such an experiment that will initially test the equivalence principle to 1 part in 10^15 (300 times better than the current limit), and 1 part in 10^17 in the future. It will also probe general relativistic effects--such as the non-linear three-graviton coupling, the gravity of an atom's kinetic energy, and the falling of light--to several decimals. Further, in contrast to astrophysical observatio…
We present a source engineering concept for a binary quantum mixture suitable as input for differential, precision atom interferometry with drift times of several seconds. To solve the non-linear dynamics of the mixture, we develop a set of scaling approach equations and verify their validity contrasting it to the one of a system of coupled Gross-Pitaevskii equations. This scaling approach is a generalization of the standard approach commonly used for single species. Its validity range is discussed with respect to intra- and inter-species interaction regimes. We propose a multi-stage, non-line…
We present results on a free-space atom interferometer operating on the first order magnetically insensitive |F=1,mF=0> -> |F=2,mF=0> transition of Bose-condensed 87Rb atoms. A pulsed atom laser is output-coupled from a Bose-Einstein condensate and propagates through a sequence of two internal state beam splitters, realized via coherent Raman transitions between the two interfering states. We observe Ramsey fringes with a visibility close to 100% and determine the current and the potentially achievable interferometric phase sensitivity. This system is well suited to testing recent proposals fo…
We provide an analytical description of the dynamics of an atom in an optical lattice using the method of perturbative adiabatic expansion. A precise understanding of the lattice-atom interaction is essential to taking full advantage of the promising applications that optical lattices offer in the field of atom interferometry. One such application is the implementation of Large Momentum Transfer (LMT) beam splitters that can potentially provide multiple order of magnitude increases in momentum space separations over current technology. We also propose interferometer geometries where optical la…
We propose and demonstrate a new scheme for atom interferometry, using light pulses inside an optical cavity as matter wave beamsplitters. The cavity provides power enhancement, spatial filtering, and a precise beam geometry, enabling new techniques such as low power beamsplitters ($<100 \mathrm{μW}$), large momentum transfer beamsplitters with modest power, or new self-aligned interferometer geometries utilizing the transverse modes of the optical cavity. As a first demonstration, we obtain Ramsey-Raman fringes with $>75\%$ contrast and measure the acceleration due to gravity, $\mathit{g}$, t…
We demonstrate a narrow-linewidth 780 nm laser system with up to 40 W power and a frequency modulation bandwidth of 230 MHz. Efficient overlap on nonlinear optical elements combines two pairs of phase-locked frequency components into a single beam. Serrodyne modulation with a high-quality sawtooth waveform is used to perform frequency shifts with > 96.5 % efficiency over tens of MHz. This system enables next-generation atom interferometry by delivering simultaneous, Stark-shift-compensated dual beam splitters while minimizing spontaneous emission.
A trapped atom interferometer involving state-selective adiabatic potentials with two microwave frequencies on a chip is proposed. We show that this configuration provides a way to achieve a high degree of symmetry between the two arms of the interferometer, which is necessary for coherent splitting and recombination of thermal (i.e. non-condensed) atoms. The resulting interferometer holds promise to achieve high contrast and long coherence time, while avoiding the mean-field interaction issues of interferometers based on trapped Bose-Einstein condenstates.