In this paper, a game-theoretic model for studying power control for wireless data networks in frequency-selective multipath environments is analyzed. The uplink of an impulse-radio ultrawideband system is considered. The effects of self-interference and multiple-access interference on the performance of generic Rake receivers are investigated for synchronous systems. Focusing on energy efficiency, a noncooperative game is proposed in which users in the network are allowed to choose their transmit powers to maximize their own utilities, and the Nash equilibrium for the proposed game is derived. It is shown that, due to the frequency selective multipath, the noncooperative solution is achieved at different signal-to-interference-plus-noise ratios, depending on the channel realization and the type of Rake receiver employed. A large-system analysis is performed to derive explicit expressions for the achieved utilities. The Pareto-optimal (cooperative) solution is also discussed and compared with the noncooperative approach.
In many applications, ultra-wide band (UWB) system experiences impulse noise due to surrounding physical noise sources. Therefore, a conventional receiver (correlator or matched filter) designed for additive Gaussian noise system is not optimum for an impulse noise affected communication channel. In this paper, we propose a new robust receiver design that utilizes the received UWB signal cluster sparsity to mitigate impulse noise. Further, multipath channel diversity enhances the signal-to-noise ratio, as compared to the single path after impulse noise removal in the proposed receiver design. …
In this paper, we consider the demodulation and equalization problem of differential Impulse Radio (IR) Ultra-WideBand (UWB) Systems with Inter-Symbol-Interference (ISI). The differential IR UWB systems have been extensively discussed recently. The advantage of differential IR UWB systems include simple receiver frontend structure. One challenge in the demodulation and equalization of such systems with ISI is that the systems have a rather complex model. The input and output signals of the systems follow a second-order Volterra model. Furthermore, the noise at the output is data dependent. In …
This paper proposes a belief propagation (BP) message passing algorithm based joint multiple symbol differential detection (MSDD) and channel decoding scheme for noncoherent differential ultra-wideband impulse radio (UWB-IR) systems. MSDD is an effective means to improve the performance of noncoherent differential UWB-IR systems. To optimize the overall detection and decoding performance, in this paper, we propose a novel soft-in soft-out (SISO) MSDD scheme and its integration with SISO channel decoding for noncoherent differential UWB-IR. we first propose a new auto-correlation receiver (AcR)…
In this paper we consider the design of spectrally efficient time-limited pulses for ultrawideband (UWB) systems using an overlapping pulse position modulation scheme. For this we investigate an orthogonalization method, which was developed in 1950 by Per-Olov Löwdin. Our objective is to obtain a set of N orthogonal (Löwdin) pulses, which remain time-limited and spectrally efficient for UWB systems, from a set of N equidistant translates of a time-limited optimal spectral designed UWB pulse. We derive an approximate Löwdin orthogonalization (ALO) by using circulant approximations for the Gram …
In recent years, there has been a growing interest in multiple access communication systems that spread their transmitted energy over very large bandwidths. These systems, which are referred to as ultra wide-band (UWB) systems, have various advantages over narrow-band and conventional wide-band systems. The importance of multiuser detection for achieving high data or low bit error rates in these systems has already been established in several studies. This paper presents iterative ('turbo') multiuser detection for impulse radio (IR) UWB systems over multipath channels. While this approach is d…
In time hopping impulse radio, $N_f$ pulses of duration $T_c$ are transmitted for each information symbol. This gives rise to two types of processing gain: (i) pulse combining gain, which is a factor $N_f$, and (ii) pulse spreading gain, which is $N_c=T_f/T_c$, where $T_f$ is the mean interval between two subsequent pulses. This paper investigates the trade-off between these two types of processing gain in the presence of timing jitter. First, an additive white Gaussian noise (AWGN) channel is considered and approximate closed form expressions for bit error probability are derived for impulse …
Finite-resolution digital receiver is recently considered as a potential way to Ultra Wide Band (UWB) communication systems due to its ability of mitigating the challenge of Analog-Digital Converter (ADC). In this paper, the effects of narrowband interference (NBI) are investigated when finite-resolution digital receiver is used for Impulse Radio-UWB (IR-UWB) system. It is shown that finite-resolution receiver enlarges the impact of NBI. The lower resolution of the UWB receiver is, the more degradations NBI causes.
The problem of choosing the optimal multipath components to be employed at a minimum mean square error (MMSE) selective Rake receiver is considered for an impulse radio ultra-wideband system. First, the optimal finger selection problem is formulated as an integer programming problem with a non-convex objective function. Then, the objective function is approximated by a convex function and the integer programming problem is solved by means of constraint relaxation techniques. The proposed algorithms are suboptimal due to the approximate objective function and the constraint relaxation steps. Ho…
In this paper, a game-theoretic model for studying power control for wireless data networks in frequency-selective multipath environments is analyzed. The uplink of an impulse-radio ultrawideband system is considered. The effects of self-interference and multiple-access interference on the performance of Rake receivers are investigated for synchronous systems. Focusing on energy efficiency, a noncooperative game is proposed in which users in the network are allowed to choose their transmit powers to maximize their own utilities, and the Nash equilibrium for the proposed game is derived. It is …
In this paper, the performance of a binary phase shift keyed random time-hopping impulse radio system with pulse-based polarity randomization is analyzed. Transmission over frequency-selective channels is considered and the effects of inter-frame interference and multiple access interference on the performance of a generic Rake receiver are investigated for both synchronous and asynchronous systems. Closed form (approximate) expressions for the probability of error that are valid for various Rake combining schemes are derived. The asynchronous system is modelled as a chip-synchronous system wi…
Power efficiency of noncoherent receivers for impulse-radio ultra-wideband (IR-UWB) transmission systems can significantly be improved, on the one hand, by employing multiple-symbol differential detection (MSDD), and, on the other hand, by providing reliability information to the subsequent channel decoder. In this paper, we combine these two techniques. Incorporating the computation of the soft information into a single-tree-search sphere decoder (SD), the application of this soft-output MSDD in a typical IR-UWB system imposes only a moderate complexity increase at, however, improved performa…
In an ultra wideband (UWB) impulse radio (IR) system, a number of pulses, each transmitted in an interval called a "frame", is employed to represent one information symbol. Conventionally, a single type of UWB pulse is used in all frames of all users. In this paper, IR systems with multiple types of UWB pulses are considered, where different types of pulses can be used in different frames by different users. Both stored-reference (SR) and transmitted-reference (TR) systems are considered. First, the spectral properties of a multi-pulse IR system with polarity randomization is investigated. It …
Ultra-high data rates with low-power consumption wireless communications and low-complexity receivers is one of the key requirements for the next 6-th Generation (6G) of communication networks. Sub-Terahertz (SubTHz) frequency bands can support Ultra-WideBand (UWB) communications and can thus offer unprecedented increase in the wireless network capacity, rendering those bands and relevant research a strong candidate technology for 6G. However, in contrast to millimeter-wave communications, the technological advances in subTHz transceivers are not yet completely mature. In this paper, we focus …
In this paper we present decision-feedback differential detection (DF-DD) schemes for autocorrelation-based detection in impulse-radio ultra-wideband (IR-UWB) systems, a signaling scheme regarded as a promising candidate in particular for low-complexity wireless sensor networks. To this end, we first discuss ideal noncoherent sequence estimation and approximations thereof based on block-wise multiple-symbol differential detection (MSDD) and the Viterbi algorithm (VA) from the perspective of tree-search/trellis decoding. Exploiting relations well-known from tree-search decoding, we are able to …
Ultra-wideband (UWB) impulse radio (IR) systems are well known for low transmission power, low probability of detection, and overlaying with narrowband (NB) systems. These merits in fact make UWB signal detection challenging, since several high-power wireless communication systems coexist with UWB signals. In the literature, cyclic features are exploited for signal detection. However, the high computational complexity of conventional cyclic feature based detectors burdens the receivers. In this paper, we propose computationally efficient detectors using the specific cyclic features of UWB sign…
We analyze the performance of coherent impulsive-radio (IR) ultra-wideband (UWB) channel in presence of the interference generated by concurrent transmissions of the systems with the same impulsive radio. We derive a novel algorithm, using Monte-Carlo method, to calculate a lower bound on the rate that can be achieved using maximum-likelihood estimator. Using this bound we show that such a channel is very robust to interference, in contrast to the nearest-neighbor detector.
This paper studies the performance of partial-Rake (PRake) receivers in impulse-radio ultrawideband wireless networks when an energy-efficient power control scheme is adopted. Due to the large bandwidth of the system, the multipath channel is assumed to be frequency-selective. By making use of noncooperative game-theoretic models and large-system analysis tools, explicit expressions are derived in terms of network parameters to measure the effects of self-interference and multiple-access interference at a receiving access point. Performance of the PRake receivers is thus compared in terms of a…
This paper studies the performance of partial-Rake (PRake) receivers in impulse-radio ultrawideband wireless networks when an energy-efficient power control scheme is adopted. Due to the large bandwidth of the system, the multipath channel is assumed to be frequency-selective. By using noncooperative game-theoretic models and large system analysis, explicit expressions are derived in terms of network parameters to measure the effects of self- and multiple-access interference at a receiving access point. Performance of the PRake is compared in terms of achieved utilities and loss to that of the…
High time resolution of ultra wideband (UWB) signals facilitates very precise positioning capabilities based on time-of-arrival (TOA) measurements. Although the theoretical lower bound for TOA estimation can be achieved by the maximum likelihood principle, it is impractical due to the need for extremely high-rate sampling and the presence of large number of multipath components. On the other hand, the conventional correlation-based algorithm, which serially searches possible signal delays, takes a very long time to estimate the TOA of a received UWB signal. Moreover, the first signal path does…
This paper studies the performance of a wireless data network using energy-efficient power control techniques when different multiple access schemes, namely direct-sequence code division multiple access (DS-CDMA) and impulse-radio ultrawideband (IR-UWB), are considered. Due to the large bandwidth of the system, the multipath channel is assumed to be frequency-selective. By making use of noncooperative game-theoretic models and large-system analysis tools, explicit expressions for the achieved utilities at the Nash equilibrium are derived in terms of the network parameters. A measure of the los…
Advances in sensor networks enable pervasive health monitoring and patient-specific treatments that take into account the patients medical history, current state, genetic background, and personal habits. However, sensors are often battery power limited and vastly differ in their application related requirements. In this paper, we address both of these problems. Specifically, we study IEEE 802.15.6 ultra-wideband (UWB) wireless body area networks (WBANs) that use impulse radio (IR). We formulate the joint optimization of the payload size and number of pulses per symbol to optimize the energy ef…
In this paper, we analyze the frequency-hopping orthogonal frequency-division multiplexing (OFDM) system known as Multiband OFDM for high-rate wireless personal area networks (WPANs) based on ultra-wideband (UWB) transmission. Besides considering the standard, we also propose and study system performance enhancements through the application of Turbo and Repeat-Accumulate (RA) codes, as well as OFDM bit-loading. Our methodology consists of (a) a study of the channel model developed under IEEE 802.15 for UWB from a frequency-domain perspective suited for OFDM transmission, (b) development and qu…
UWB has a very large bandwidth in a WPAN network, which is best used for HD-video applications. Meanwhile, MBWA is a WMAN option optimized for wireless-IP in a fast moving vehicle. In this paper, we propose a practical engineering scenario that harnesses simultaneously the distinctive feature of both UWB and MBWA. However, this in-proximity operation of the technologies will inevitably cause mutual interference to both systems. In light of this, as a preliminary phase to coexistence, we have derived, under various circumstances, the maximum interference power limit that needs to be respected i…
This paper presents a power-efficient mask-constrained ultra-wideband (UWB) waveform design with radio channel effects taken into consideration. Based on a finite impulse response (FIR) filter, we develop a convex optimization model with respect to the autocorrelation of the filter coefficients to optimize the transmitted signal power spectrum, subject to a regulatory emission mask. To improve power efficiency, effects of transmitter radio frequency (RF) components are included in the optimization of the transmitter-output waveform, and radio propagation effects are considered for optimizing a…
Due to unique characteristics of sensor nodes, choosing energy-efficient modulation scheme with low-complexity implementation (refereed to as green modulation) is a critical factor in the physical layer of Wireless Sensor Networks (WSNs). This paper presents (to the best of our knowledge) the first in-depth analysis of energy efficiency of various modulation schemes using realistic models in IEEE 802.15.4 standard and present state-of-the art technology, to find the best scheme in a proactive WSN over Rayleigh and Rician flat-fading channel models with path-loss. For this purpose, we describe …
Throughput capacity is a critical parameter for the design and evaluation of ad-hoc wireless networks. Consider n identical randomly located nodes, on a unit area, forming an ad-hoc wireless network. Assuming a fixed per node transmission capability of T bits per second at a fixed range, it has been shown that the uniform throughput capacity per node r(n) is Theta((T)/(sqrt{n log n})), a decreasing function of node density n. However an alternate communication model may also be considered, with each node constrained to a maximum transmit power P_0 and capable of utilizing W Hz of bandwidth. Un…
Due to availability of large spectrum chunks, the sub-TeraHertz (subTHz) frequency band can support Ultra-WideBand (UWB) wireless communications, paving the way for unprecedented increase in the wireless network capacity. This fact is expected to be the next breakthrough for the upcoming sixth Generation (6G) standards. However, the technology of subTHz transceivers is not yet mature enough to apply the advanced signal processing currently being implemented for millimeter wave wireless communications. In this paper, we consider the Time Reversal (TR) precoding technique, which provides simple …
The most common cause of transmission failure in Wireless High Performance (WirelessHP) target industry environments is impulse interference. As interleavers are commonly used to improve the reliability on the Orthogonal Frequency Division Multiplexing (OFDM) symbol level for long packet transmission, this paper considers the feasibility of applying short-packet bit interleaving to enhance the impulse/burst interference resisting capability on both OFDM symbol and frame level. Using the Universal Software Radio Peripherals (USRP) and PC hardware platform, the Packet Error Rate (PER) performanc…
An unknown-position sensor can be localized if there are three or more anchors making time-of-arrival (TOA) measurements of a signal from it. However, the location errors can be very large due to the fact that some of the measurements are from non-line-of-sight (NLOS) paths. In this paper, we propose a semi-definite programming (SDP) based node localization algorithm in NLOS environment for ultra-wideband (UWB) wireless sensor networks. The positions of sensors can be estimated using the distance estimates from location-aware anchors as well as other sensors. However, in the absence of LOS pat…
In this paper, we introduce an uplink optical wireless positioning system for indoor applications. This technique uses fingerprints based on the indoor optical wireless channel impulse response for localization. Exploiting the line of sight peak power (LOS), the second power peak (SPP) of the impulse response, and the delay between the LOS and SPP, we present a proof of concept design and theoretical analysis for localization employing a single fixed reference point, i.e., a photodetector (PD) on the ceiling. Adding more PDs leads to more accurate transmitter position estimation. As a benchmar…
Shannon's mutual information of a random multiple antenna and multipath channel is studied in the general case where the channel impulse response is an ergodic and stationary process which is assumed to be available at the receiver. From this viewpoint, the channel is represented by an ergodic self-adjoint block-Jacobi operator, which is close in many aspects to a block version of a random Schrödinger operator. The mutual information is then related to the so-called density of states of this operator. In this paper, it is shown that under the weakest assumptions on the channel, the mutual info…
A range of efficient wireless processes and enabling techniques are put under a magnifier glass in the quest for exploring different manifestations of correlated processes, where sub-Nyquist sampling may be invoked as an explicit benefit of having a sparse transform-domain representation. For example, wide-band next-generation systems require a high Nyquist-sampling rate, but the channel impulse response (CIR) will be very sparse at the high Nyquist frequency, given the low number of reflected propagation paths. This motivates the employment of compressive sensing based processing techniques f…
An estimation method of Radio Frequency fingerprint (RFF) based on the physical hardware properties of the nonlinearity and in-phase and quadrature (IQ) imbalance of the transmitter is proposed for the authentication of wireless orthogonal frequency division multiplexing (OFDM) devices. Firstly, the parameters of the nonlinearity of the transmitter and finite impulse response (FIR) of the wireless multipath channel are estimated with a Hammerstein system parameter separation technique. Secondly, the best IQ imbalance parameter combination estimation is obtained with a searching algorithm and t…
Visible light positioning has the potential to yield sub-centimeter accuracy in indoor environments, yet conventional received signal strength (RSS)-based localization algorithms cannot achieve this because their performance degrades from optical multipath reflection. However, this part of the optical received signal is deterministic due to the often static and predictable nature of the optical wireless channel. In this paper, the performance of optical channel impulse response (OCIR)-based localization is studied using an artificial neural network (ANN) to map embedded features of the OCIR to…
We introduce the concept of smart radio environments, currently intensely studied for wireless communication in metasurface-programmable meter-scaled environments (e.g., inside rooms), on the chip scale. Wireless networks-on-chips (WNoCs) are a candidate technology to improve inter-core communication on chips but current proposals are plagued by a dilemma: either the received signal is weak, or it is significantly reverberated such that the on-off-keying modulation speed must be throttled. Here, we overcome this vexing problem by endowing the wireless on-chip environment with in situ programma…
This paper introduces a novel "all-spike" low-power solution for remote wireless inference that is based on neuromorphic sensing, Impulse Radio (IR), and Spiking Neural Networks (SNNs). In the proposed system, event-driven neuromorphic sensors produce asynchronous time-encoded data streams that are encoded by an SNN, whose output spiking signals are pulse modulated via IR and transmitted over general frequence-selective channels; while the receiver's inputs are obtained via hard detection of the received signals and fed to an SNN for classification. We introduce an end-to-end training procedur…
