Most research on 3D user interfaces aims at providing only a single sensory modality. One challenge is to integrate several sensory modalities into a seamless system while preserving each modality's immersion and performance factors. This paper concerns manipulation tasks and proposes a visuo-haptic system integrating immersive visualization, tactile force and tactile feedback with co-location. An industrial application is presented.
Haptic feedback has become crucial to enhance the user experiences in Virtual Reality (VR). This justifies the sudden burst of novel haptic solutions proposed these past years in the HCI community. This article is a survey of Virtual Reality interactions, relying on haptic devices. We propose two dimensions to describe and compare the current haptic solutions: their degree of physicality, as well as their degree of actuation. We depict a compromise between the user and the designer, highlighting how the range of required or proposed stimulation in VR is opposed to the haptic interfaces flexibi…
Grounded haptic devices can provide a variety of forces but have limited working volumes. Wearable haptic devices operate over a large volume but are relatively restricted in the types of stimuli they can generate. We propose the concept of docking haptics, in which different types of haptic devices are dynamically docked at run time. This creates a hybrid system, where the potential feedback depends on the user's location. We show a prototype docking haptic workspace, combining a grounded six degree-of-freedom force feedback arm with a hand exoskeleton. We are able to create the sensation of …
We present Shape-Haptics, an approach for designers to rapidly design and fabricate passive force feedback mechanisms for physical interfaces. Such mechanisms are used in everyday interfaces and tools, and they are challenging to design. Shape-Haptics abstracts and broadens the haptic expression of this class of force feedback systems through 2D laser cut configurations that are simple to fabricate. They leverage the properties of polyoxymethylene plastic and comprise a compliant spring structure that engages with a sliding profile during tangible interaction. By shaping the sliding profile, d…
Haptic feedback is essential to acquire immersive experience when interacting in virtual or augmented reality. Although the existing promising magnetic levitation (maglev) haptic system has advantages of none mechanical friction, its performance is limited by its navigation method, which mainly results from the challenge that it is difficult to obtain high precision, high frame rate and good stability with lightweight design at the same. In this study, we propose to perform the visual-inertial fusion navigation based on sequence-to-sequence learning for the maglev haptic interaction. Cascade L…
Mid-air interaction is one of the promising interaction modalities in virtual reality (VR) due to its merits in naturalness and intuitiveness, but the interaction suffers from the lack of haptic feedback as no force or vibrotactile feedback can be provided in mid-air. As a breakthrough to compensate for this insufficiency, the application of pseudo-haptic features which create the visuo-haptic illusion without actual physical haptic stimulus can be explored. Therefore, this study aimed to investigate the effect of four pseudo-haptic features: proximity feedback, protrusion, hit effect, and pen…
We propose a new approach for interaction in Virtual Reality (VR) using mobile robots as proxies for haptic feedback. This approach allows VR users to have the experience of sharing and manipulating tangible physical objects with remote collaborators. Because participants do not directly observe the robotic proxies, the mapping between them and the virtual objects is not required to be direct. In this paper, we describe our implementation, various scenarios for interaction, and a preliminary user study.
A rare genetic condition, PIEZO2 loss of function (LOF) is characterized by absence of proprioception and light touch, which makes functional tasks (e.g., walking, manipulation) difficult. There are no pharmacological treatments or assistive technologies available for individuals with PIEZO2-LOF. We propose a sensory substitution device that communicates proprioceptive feedback via detectable haptic stimuli. We created a wearable prototype that maps measurements of elbow movement to deep pressure applied to the forearm. The prototype applies up to 18 N, includes an embedded force sensor, and i…
Designing for situational awareness could lead to better solutions for disabled people, likewise, exploring the needs of disabled people could lead to innovations that can address situational impairments. This in turn can create non-stigmatising assistive technology for disabled people from which eventually everyone could benefit. In this paper, we investigate the potential for advanced haptics to compliment the graphical user interface of mobile devices, thereby enhancing user experiences of all people in some situations (e.g. sunlight interfering with interaction) and visually impaired peopl…
Previous studies have aimed at creating a simple hardware implementation of surface friction display. In this study, we propose a new method for presenting static frictional sensation using the pseudo-haptic effect as a first attempt, which is the simplest implementation of presenting static friction sensation. We focus on the stick-slip phenomenon while users explore surfaces with an input device, such as a stylus. During the stick phase, we present users with pseudo-haptic feedback that represents static friction on the surface. In our method, users watch a virtual contact point become stuck…
Walking is an essential activity for a healthy life, which becomes less tiring and more enjoyable if done together. Common difficulties we have in performing sufficient physical exercise, for instance the lack of motivation, can be overcome by exploiting its social aspect. However, our lifestyle sometimes makes it very difficult to find time together with others who live far away from us to go for a walk. In this paper we propose a novel system enabling people to have a 'remote social walk' by streaming the gait cadence between two persons walking in different places, increasing the sense of m…
In this paper we introduce the combined use of Brain-Computer Interfaces (BCI) and Haptic interfaces. We propose to adapt haptic guides based on the mental activity measured by a BCI system. This novel approach is illustrated within a proof-of-concept system: haptic guides are toggled during a path-following task thanks to a mental workload index provided by a BCI. The aim of this system is to provide haptic assistance only when the user's brain activity reflects a high mental workload. A user study conducted with 8 participants shows that our proof-of-concept is operational and exploitable. R…
Skolkovo Institute of Science and Technology（斯科尔科沃科学技术研究院）
We propose a concept of a novel interaction strategy for providing rich haptic feedback in Virtual Reality (VR), when each user's finger is connected to micro-quadrotor with a wire. Described technology represents the first flying wearable haptic interface. The solution potentially is able to deliver high resolution force feedback to each finger during fine motor interaction in VR. The tips of tethers are connected to the centers of quadcopters under their bottom. Therefore, flight stability is increasing and the interaction forces are becoming stronger which allows to use smaller drones.
Some forces in nature are difficult to comprehend due to their non-intuitive and abstract nature. Forces driving gyroscopic precession are invisible, yet their effect is very important in a variety of applications, from space navigation to motion tracking. Current technological advancements in haptic interfaces, enables development of revolutionary user interfaces, combining multiple modalities: tactile, visual and auditory. Tactile augmented user interfaces have been deployed in a variety of areas, from surgical training to elementary education. This research provides an overview of haptic us…
Preoperative gestures include tactile sampling of the mechanical properties of biological tissue for both histological and pathological considerations. Tactile properties used in conjunction with visual cues can provide useful feedback to the surgeon. Development of novel cost effective haptic-based simulators and their introduction in the minimally invasive surgery learning cycle can absorb the learning curve for your residents. Receiving pre-training in a core set of surgical skills can reduce skill acquisition time and risks. We present the integration of a real-time surface stiffness adjus…
Skolkovo Institute of Science and Technology (Skoltech)（斯科尔科沃科学技术研究院（Skoltech））
TouchVR is a novel wearable haptic interface which can deliver multimodal tactile stimuli on the palm by DeltaTouch haptic display and vibrotactile feedback on the fingertips by vibration motors for the Virtual Reality (VR) user. DeltaTouch display is capable of generating 3D force vector at the contact point and presenting multimodal tactile sensation of weight, slippage, encounter, softness, and texture. The VR system consists of HTC Vive Pro base stations and head-mounted display (HMD), and Leap Motion controller for tracking the user's hands motion in VR. The MatrixTouch, BallFeel, and Rob…
HapticGiant: A Novel Very Large Kinesthetic Haptic Interface with Hierarchical Force Control
Intelligent Sensor-Actuator-Systems Laboratory (ISAS), Institute for Anthropomatics and Robotics, Karlsruhe Institute of Technology (KIT)（智能传感器-执行器系统实验室（ISAS），人机学与机器人研究所，卡尔斯鲁厄理工学院（KIT））
Wearable fingertip haptic interfaces provide tactile stimuli on the fingerpads by applying skin pressure, linear and rotational shear, and vibration. Designing and fabricating a compact, multi-degree-of-freedom, and forceful fingertip haptic interface is challenging due to trade-offs among miniaturization, multifunctionality, and manufacturability. Downsizing electromagnetic actuators that produce high torques is infeasible, and integrating multiple actuators, links, joints, and transmission elements increases device size and weight. 3-D printing enables rapid manufacturing of complex devices …
Rendering stable hard surfaces is an important problem in haptics for many tasks, including training simulators for orthopedic surgery or dentistry. Current impedance devices cannot provide enough force and stiffness to render a wall, and the high friction and inertia of admittance devices make it difficult to render free space. We propose to address these limitations by combining haptic augmented reality, untethered haptic interaction, and an encountered-type haptic display. We attach a plate with the desired hardness on the kinesthetic device's end-effector, which the user interacts with usi…
Armstrong Atlantic State University（阿姆斯特朗大西洋州立大学）；Ovidius University（奥维迪乌斯大学）
Recent advances in haptic hardware and software technology have generated interest in novel, multimodal interfaces based on the sense of touch. Such interfaces have the potential to revolutionize the way we think about human computer interaction and open new possibilities for simulation and training in a variety of fields. In this paper we review several frameworks, APIs and toolkits for haptic user interface development. We explore these software components focusing on minimally invasive surgical simulation systems. In the area of medical diagnosis, there is a strong need to determine mechani…
The recently advanced robotics technology enables robots to assist users in their daily lives. Haptic guidance (HG) improves users' task performance through physical interaction between robots and users. It can be classified into optimal action-based HG (OAHG), which assists users with an optimal action, and user prediction-based HG (UPHG), which assists users with their next predicted action. This study aims to understand the difference between OAHG and UPHG and propose a combined HG (CombHG) that achieves optimal performance by complementing each HG type, which has important implications for…
Skolkovo Institute of Science and Technology（斯科尔科沃科学技术研究院）
This paper presents a novel haptic device DeltaFinger designed to deliver the force of interaction with virtual objects by guiding user's finger with wearable delta mechanism. The developed interface is capable to deliver 3D force vector to the fingertip of the index finger of the user, allowing complex rendering of virtual reality (VR) environment. The developed device is able to produce the kinesthetic feedback up to 1.8 N in vertical projection and 0.9 N in horizontal projection without restricting the motion freedom of of the remaining fingers. The experimental results showed a sufficient …
Skolkovo Institute of Science and Technology（斯科尔科沃科技学院）
We propose a novel concept of augmented reality (AR) human-drone interaction driven by RL-based swarm behavior to achieve intuitive and immersive control of a swarm formation of unmanned aerial vehicles. The DroneARchery system developed by us allows the user to quickly deploy a swarm of drones, generating flight paths simulating archery. The haptic interface LinkGlide delivers a tactile stimulus of the bowstring tension to the forearm to increase the precision of aiming. The swarm of released drones dynamically avoids collisions between each other, the drone following the user, and external o…
Skoltech（斯科尔科沃科技学院）；Imperial College London（伦敦帝国学院）
To achieve high fidelity haptic rendering of soft objects in a high mobility virtual environment, we propose a novel haptic display DandelionTouch. The tactile actuators are delivered to the fingertips of the user by a swarm of drones. Users of DandelionTouch are capable of experiencing tactile feedback in a large space that is not limited by the device's working area. Importantly, they will not experience muscle fatigue during long interactions with virtual objects. Hand tracking and swarm control algorithm allow guiding the swarm with hand motions and avoid collisions inside the formation. S…
