In this work, we propose StereoGeo, an end-to-end network-based approach for stereo camera calibration. Our method estimates the focal lengths and gravity directions of the left and right cameras, as well as the relative extrinsic transformation relating them. Existing methods often rely on calibration patterns in structured environments or address only a single camera configuration, being limited to either intrinsic or extrinsic estimation, and depending on a multi-view setups. StereoGeo extends the GeoCalib algorithm, integrating deep neural network feature extraction with a differentiable optimizer. Extensive experiments on real-world benchmarks demonstrate that StereoGeo achieves competitive performance for intrinsic calibration and provides accurate stereo extrinsic estimation, outperforming existing methods that are limited to monocular settings. The dataset used in this work is partially publicly available at https://github.com/meddourimane/StereoGeo-dataset.
Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；FZI Research Center for Information Technology（FZI信息技术研究中心）
In this paper, we present TEScalib, a novel extrinsic self-calibration approach of LiDAR and stereo camera using the geometric and photometric information of surrounding environments without any calibration targets for automated driving vehicles. Since LiDAR and stereo camera are widely used for sensor data fusion on automated driving vehicles, their extrinsic calibration is highly important. However, most of the LiDAR and stereo camera calibration approaches are mainly target-based and therefore time consuming. Even the newly developed targetless approaches in last years are either inaccurate…
Optimal Pose Guidance for Stereo Calibration in 3D Deformation Measurement
College of Aerospace Science and Engineering（航空航天科学与工程学院）；National University of Defense Technology（国防科技大学）；Hunan Provincial Key Laboratory of Image Measurement and Vision Navigation（湖南省图像测量与视觉导航重点实验室）；Hypersonic Technology Laboratory（高超声速技术实验室）；Hunan Key Laboratory of Intelligent Planning and Simulation for Aerospace Missions（湖南省航空航天任务智能规划与模拟重点实验室）
Technical University of Munich（慕尼黑工业大学）；University of Copenhagen（哥本哈根大学）
We conduct a thorough study of photometric stereo under nearby point light source illumination, from modeling to numerical solution, through calibration. In the classical formulation of photometric stereo, the luminous fluxes are assumed to be directional, which is very difficult to achieve in practice. Rather, we use light-emitting diodes (LEDs) to illuminate the scene to reconstruct. Such point light sources are very convenient to use, yet they yield a more complex photometric stereo model which is arduous to solve. We first derive in a physically sound manner this model, and show how to cal…
Passive depth estimation is among the most long-studied fields in computer vision. The most common methods for passive depth estimation are either a stereo or a monocular system. Using the former requires an accurate calibration process, and has a limited effective range. The latter, which does not require extrinsic calibration but generally achieves inferior depth accuracy, can be tuned to achieve better results in part of the depth range. In this work, we suggest combining the two frameworks. We propose a two-camera system, in which the cameras are used jointly to extract a stereo depth and …
CNR–ISC (National Research Council - Institute for Complex Systems)（国家研究委员会-复杂系统研究所）；South China Agricultural University（华南农业大学）
The reconstruction of a scene via a stereo-camera system is a two-steps process, where at first images from different cameras are matched to identify the set of point-to-point correspondences that then will actually be reconstructed in the three dimensional real world. The performance of the system strongly relies of the calibration procedure, which has to be carefully designed to guarantee optimal results. We implemented three different calibration methods and we compared their performance over 19 datasets. We present the experimental evidence that, due to the image noise, a single set of par…
Fraunhofer Institute Applied Optics and Precision Engineering（弗劳恩霍夫应用光学与精密工程研究所）
Code minimization provides a speed-up of the processing time of fringe projection based stereo sensors and possibly makes them real-time applicable. This paper reports a methodology which enables such sensors to completely omit Gray code or other additional code. Only a sequence of sinusoidal images is necessary. The code reduction is achieved by involvement of the projection unit into the measurement, double triangulation, and a precise projector calibration or significant projector calibration improvement, respectively.
Sensor setups consisting of a combination of 3D range scanner lasers and stereo vision systems are becoming a popular choice for on-board perception systems in vehicles; however, the combined use of both sources of information implies a tedious calibration process. We present a method for extrinsic calibration of lidar-stereo camera pairs without user intervention. Our calibration approach is aimed to cope with the constraints commonly found in automotive setups, such as low-resolution and specific sensor poses. To demonstrate the performance of our method, we also introduce a novel approach f…
École Polytechnique Federale de Lausanne（洛桑联邦理工学院）；University of Bern（伯尔尼大学）；INAF, Osservatorio Astronomico di Padova（意大利国家天体物理研究所帕多瓦天文台）；RUAG Space；Idiap Research Institute（Idiap 研究所）
There are many geometric calibration methods for "standard" cameras. These methods, however, cannot be used for the calibration of telescopes with large focal lengths and complex off-axis optics. Moreover, specialized calibration methods for the telescopes are scarce in literature. We describe the calibration method that we developed for the Colour and Stereo Surface Imaging System (CaSSIS) telescope, on board of the ExoMars Trace Gas Orbiter (TGO). Although our method is described in the context of CaSSIS, with camera-specific experiments, it is general and can be applied to other telescopes.…
Maria Curie Sklodowska University（玛丽亚·居里-斯克沃多夫斯卡大学）；Warsaw University of Technology（华沙理工大学）
This paper presents a method for extrinsic camera calibration (estimation of camera rotation and translation matrices) from a sequence of images. It is assumed camera intrinsic matrix and distortion coefficients are known and fixed during the entire sequence. %This allows to decrease a number of pairs of corresponding keypoints between images needed to estimate epipolar geometry compared to uncalibrated case. Performance of the presented method is evaluated on a number of multi-view stereo test datasets. Presented algorithm can be used as a first stage in a dense stereo reconstruction system.
Binocular stereo vision is an important branch of machine vision, which imitates the human eye and matches the left and right images captured by the camera based on epipolar constraints. The matched disparity map can be calculated according to the camera imaging model to obtain a depth map, and then the depth map is converted to a point cloud image to obtain spatial point coordinates, thereby achieving the purpose of ranging. However, due to the influence of illumination under water, the captured images no longer meet the epipolar constraints, and the changes in imaging models make traditional…
Universidad Tecnológica de Bolívar（玻利瓦尔技术大学）；Purdue University（普渡大学）
The key to accurate 3D shape measurement in Fringe Projection Profilometry (FPP) is the proper calibration of the measurement system. Current calibration techniques rely on phase-coordinate mapping (PCM) or back-projection stereo-vision (SV) methods. PCM methods are cumbersome to implement as they require precise positioning of the calibration target relative to the FPP system but produce highly accurate measurements within the calibration volume. SV methods generally do not achieve the same accuracy level. However, the calibration is more flexible in that the calibration target can be arbitra…
This paper presents a framework for the targetless extrinsic calibration of stereo cameras and Light Detection and Ranging (LiDAR) sensors with a non-overlapping Field of View (FOV). In order to solve the extrinsic calibrations problem under such challenging configuration, the proposed solution exploits road markings as static and robust features among the various dynamic objects that are present in urban environment. First, this study utilizes road markings that are commonly captured by the two sensor modalities to select informative images for estimating the extrinsic parameters. In order to…
Compact and low-cost devices are needed for autonomous driving to image and measure distances to objects 360-degree around. We have been developing an omnidirectional stereo camera exploiting two hyperbolic mirrors and a single set of a lens and sensor, which makes this camera compact and cost efficient. We establish a new calibration method for this camera considering higher-order radial distortion, detailed tangential distortion, an image sensor tilt, and a lens-mirror offset. Our method reduces the calibration error by 6.0 and 4.3 times for the upper- and lower-view images, respectively. Th…
Imperial College London（帝国理工学院）；AquaMed Research and Education（AquaMed研究与教育）
In this paper we address the problem of multiple camera calibration in the presence of a homogeneous scene, and without the possibility of employing calibration object based methods. The proposed solution exploits salient features present in a larger field of view, but instead of employing active vision we replace the cameras with stereo rigs featuring a long focal analysis camera, as well as a short focal registration camera. Thus, we are able to propose an accurate solution which does not require intrinsic variation models as in the case of zooming cameras. Moreover, the availability of the …
In this work, we present a novel dataset for assessing the accuracy of stereo visual odometry. The dataset has been acquired by a small-baseline stereo rig mounted on the top of a moving car. The groundtruth is supplied by a consumer grade GPS device without IMU. Synchronization and alignment between GPS readings and stereo frames are recovered after the acquisition. We show that the attained groundtruth accuracy allows to draw useful conclusions in practice. The presented experiments address influence of camera calibration, baseline distance and zero-disparity features to the achieved reconst…
ETH Zürich（苏黎世联邦理工学院）；Google Research（谷歌研究院）；KU Leuven（鲁汶大学）
We present an automated machine learning approach for uncalibrated photometric stereo (PS). Our work aims at discovering lightweight and computationally efficient PS neural networks with excellent surface normal accuracy. Unlike previous uncalibrated deep PS networks, which are handcrafted and carefully tuned, we leverage differentiable neural architecture search (NAS) strategy to find uncalibrated PS architecture automatically. We begin by defining a discrete search space for a light calibration network and a normal estimation network, respectively. We then perform a continuous relaxation of …
Calibration-Free Surface Normals Estimation in Vision-Based Tactile Sensing using Universal Photometric Stereo
TU Dresden（德累斯顿工业大学）；TUD Dresden University of Technology（德累斯顿工业大学）；Centre for Tactile Internet with Human-in-the-Loop (CeTI)（人在环触觉互联网中心（CeTI））；DKFZ（德国癌症研究中心）；University Hospital Carl Gustav Carus（卡尔·古斯塔夫·卡鲁斯大学医院）；Helmholtz-Zentrum Dresden-Rossendorf (HZDR)（德累斯顿-罗森多夫亥姆霍兹中心（HZDR））
Faculty of Electrical Engineering, University of Ljubljana（卢布尔雅那大学电气工程学院）
We address the problem of optical decalibration in mobile stereo camera setups, especially in context of autonomous vehicles. In real world conditions, an optical system is subject to various sources of anticipated and unanticipated mechanical stress (vibration, rough handling, collisions). Mechanical stress changes the geometry between the cameras that make up the stereo pair, and as a consequence, the pre-calculated epipolar geometry is no longer valid. Our method is based on optimization of camera geometry parameters and plugs directly into the output of the stereo matching algorithm. There…
Indian Institute of Technology Hyderabad（印度理工学院海得拉巴分校）
Metric auto calibration of a camera network from multiple views has been reported by several authors. Resulting 3D reconstruction recovers shape faithfully, but not scale. However, preservation of scale becomes critical in applications, such as multi-party telepresence, where multiple 3D scenes need to be fused into a single coordinate system. In this context, we propose a camera network configuration that includes a stereo pair with known baseline separation, and analytically demonstrate Euclidean auto calibration of such network under mild conditions. Further, we experimentally validate our …
High-accuracy per-pixel depth is vital for computational photography, so smartphones now have multimodal camera systems with time-of-flight (ToF) depth sensors and multiple color cameras. However, producing accurate high-resolution depth is still challenging due to the low resolution and limited active illumination power of ToF sensors. Fusing RGB stereo and ToF information is a promising direction to overcome these issues, but a key problem remains: to provide high-quality 2D RGB images, the main color sensor's lens is optically stabilized, resulting in an unknown pose for the floating lens t…
University College London（伦敦大学学院）；Imperial College London（帝国理工学院）
Multispectral imaging (MSI) can provide information about tissue oxygenation, perfusion and potentially function during surgery. In this paper we present a novel, near real-time technique for intrinsic measurements of total haemoglobin (THb) and blood oxygenation (SO2) in tissue using only RGB images from a stereo laparoscope. The high degree of spectral overlap between channels makes inference of haemoglobin concentration challenging, non-linear and under constrained. We decompose the problem into two constrained linear sub-problems and show that with Tikhonov regularisation the estimation si…
We propose a learning-based method that solves monocular stereo and can be extended to fuse depth information from multiple target frames. Given two unconstrained images from a monocular camera with known intrinsic calibration, our network estimates relative camera poses and the depth map of the source image. The core contribution of the proposed method is threefold. First, a network is tailored for static scenes that jointly estimates the optical flow and camera motion. By the joint estimation, the optical flow search space is gradually reduced resulting in an efficient and accurate flow esti…
ETH Zürich（苏黎世联邦理工学院）；Microsoft Mixed Reality & AI Zurich Lab（微软混合现实与人工智能苏黎世实验室）；Chalmers University of Technology（查尔姆斯理工大学）
Camera calibration is an essential first step in setting up 3D Computer Vision systems. Commonly used parametric camera models are limited to a few degrees of freedom and thus often do not optimally fit to complex real lens distortion. In contrast, generic camera models allow for very accurate calibration due to their flexibility. Despite this, they have seen little use in practice. In this paper, we argue that this should change. We propose a calibration pipeline for generic models that is fully automated, easy to use, and can act as a drop-in replacement for parametric calibration, with a fo…
SDGE: Stereo Guided Depth Estimation for 360$^\circ$ Camera Sets
School of Computer Science and Technology, Harbin Institute of Technology（哈尔滨工业大学计算机科学与技术学院）；SZ DJI Technology Co., Ltd.（深圳市大疆创新科技有限公司）；The University of New South Wales（新南威尔士大学）
University of East Anglia（东英吉利大学）；University of Edinburgh（爱丁堡大学）
Homographies -- a mathematical formalism for relating image points across different camera viewpoints -- are at the foundations of geometric methods in computer vision and are used in geometric camera calibration, image registration, and stereo vision and other tasks. In this paper, we show the surprising result that colors across a change in viewing condition (changing light color, shading and camera) are also related by a homography. We propose a new color correction method based on color homography. Experiments demonstrate that solving the color homography problem leads to more accurate cal…
This paper introduces single-image geometric and appearance reconstruction from water reflection photography, i.e., images capturing direct and water-reflected real-world scenes. Water reflection offers an additional viewpoint to the direct sight, collectively forming a stereo pair. The water-reflected scene, however, includes internally scattered and reflected environmental illumination in addition to the scene radiance, which precludes direct stereo matching. We derive a principled iterative method that disentangles this scene radiometry and geometry for reconstructing 3D scene structure as …
With the developments of dual-lens camera modules,depth information representing the third dimension of thecaptured scenes becomes available for smartphones. It isestimated by stereo matching algorithms, taking as input thetwo views captured by dual-lens cameras at slightly differ-ent viewpoints. Depth-of-field rendering (also be referred toas synthetic defocus or bokeh) is one of the trending depth-based applications. However, to achieve fast depth estima-tion on smartphones, the stereo pairs need to be rectified inthe first place. In this paper, we propose a cost-effective so-lution to perfo…
The College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China（航空科学与工程学院，国防科技大学，长沙410073，中国）；The GNSS Research Center, Wuhan University, Wuhan 430000, China（导航定位研究室，武汉大学，武汉430000，中国）
Morphable design and depth-based visual control are two upcoming trends leading to advancements in the field of quadrotor autonomy. Stereo-cameras have struck the perfect balance of weight and accuracy of depth estimation but suffer from the problem of depth range being limited and dictated by the baseline chosen at design time. In this paper, we present a framework for quadrotor navigation based on a stereo camera system whose baseline can be adapted on-the-fly. We present a method to calibrate the system at a small number of discrete baselines and interpolate the parameters for the entire ba…
Mutual calibration between color and depth cameras is a challenging topic in multi-modal data registration. In this paper, we are confronted with a "Bimodal Stereo" problem, which aims to solve camera pose from a pair of an uncalibrated color image and a depth map from different views automatically. To address this problem, an iterative Shape-from-Shading (SfS) based framework is proposed to estimate shape and pose simultaneously. In the pipeline, the estimated shape is refined by the shape prior from the given depth map under the estimated pose. Meanwhile, the estimated pose is improved by th…
Implementation of a Zed 2i Stereo Camera for High-Frequency Shoreline Change and Coastal Elevation Monitoring
College of Engineering and Computer Science, Texas A&M University–Corpus Christi（德克萨斯农工大学科珀斯克里斯蒂分校工程与计算机科学学院）；Conrad Blucher Institute for Surveying and Science（康拉德·布鲁克测绘与科学研究院）
Most sensor setups for onboard autonomous perception are composed of LiDARs and vision systems, as they provide complementary information that improves the reliability of the different algorithms necessary to obtain a robust scene understanding. However, the effective use of information from different sources requires an accurate calibration between the sensors involved, which usually implies a tedious and burdensome process. We present a method to calibrate the extrinsic parameters of any pair of sensors involving LiDARs, monocular or stereo cameras, of the same or different modalities. The p…
Over the last decade, one of the most relevant public datasets for evaluating odometry accuracy is the KITTI dataset. Beside the quality and rich sensor setup, its success is also due to the online evaluation tool, which enables researchers to benchmark and compare algorithms. The results are evaluated on the test subset solely, without any knowledge about the ground truth, yielding unbiased, overfit free and therefore relevant validation for robot localization based on cameras, 3D laser or combination of both. However, as any sensor setup, it requires prior calibration and rectified stereo im…
Vellore Institute of Technology, Chennai（金奈韦洛尔理工大学）；Birla Institute of Technology and Science, Hyderabad（海得拉巴比尔拉理工学院）；Veermata Jijabai Technological Institute, Mumbai（孟买韦尔马塔·吉贾拜技术学院）；International Institute of Information and Technology, Hyderabad（海得拉巴国际信息技术学院）
With the advent of autonomous vehicles, LiDAR and cameras have become an indispensable combination of sensors. They both provide rich and complementary data which can be used by various algorithms and machine learning to sense and make vital inferences about the surroundings. We propose a novel pipeline and experimental setup to find accurate rigid-body transformation for extrinsically calibrating a LiDAR and a camera. The pipeling uses 3D-3D point correspondences in LiDAR and camera frame and gives a closed form solution. We further show the accuracy of the estimate by fusing point clouds fro…
Combining new, low-cost thermal infrared and time-of-flight range sensors provides new opportunities. In this position paper we explore the possibilities of combining these sensors and using their fused data for person detection. The proposed calibration approach for this sensor combination differs from the traditional stereo camera calibration in two fundamental ways. A first distinction is that the spectral sensitivity of the two sensors differs significantly. In fact, there is no sensitivity range overlap at all. A second distinction is that their resolution is typically very low, which req…
Single-Shot Metric Depth from Focused Plenoptic Cameras
Institute of Robotics and Mechatronics, German Aerospace Center (DLR)（德国航空航天中心机器人与机电一体化研究所）；I3A, Universidad de Zaragoza（萨拉戈萨大学I3A研究所）；Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）
DFKI - German Research Center for Artificial Intelligence（德国人工智能研究中心）
This paper demonstrates a system capable of combining a sparse, indirect, monocular visual SLAM, with both offline and real-time Multi-View Stereo (MVS) reconstruction algorithms. This combination overcomes many obstacles encountered by autonomous vehicles or robots employed in agricultural environments, such as overly repetitive patterns, need for very detailed reconstructions, and abrupt movements caused by uneven roads. Furthermore, the use of a monocular SLAM makes our system much easier to integrate with an existing device, as we do not rely on a LiDAR (which is expensive and power consum…
