arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2604.23767cs.LG
收藏

WISE-FM:面向多任务井设计的多任务基础模型

WISE-FM:Operation-Aware, Engineering-Informed Foundation Model for Multi-Task Well Design

Department of Chemical Engineering, Norwegian University of Science and Technology (NTNU)(挪威科学技术大学化学工程系)

Carine de Menezes Rebello, Anderson Rapello dos Santos, Idelfonso B. R. Nogueira

AI总结:

本文提出WISE-FM,一种结合设计意识、物理约束和多任务学习的多任务模型,用于提升井设计预测精度与完整性监控能力。

摘要:

在跨多样井组部署机器学习模型需要泛化到设计参数超出训练分布的井。当前基于数据的虚拟流量计(VFM)和井底估计方法通常独立处理每口井或忽略井设计对操作行为的影响。本文提出WISE(井智能与系统工程基础模型),一种设计意识、物理约束的多任务模型,整合了三个互补机制:特征层面线性调制(FiLM)和跨模态注意力以将操作嵌入条件化到井设计参数;多任务学习同时预测流量、井底条件和流量模式分类;以及结构质量守恒与软物理约束,源自井工程原理。在ManyWells基准(2000口模拟井,10^6个数据点)上的评估表明,设计意识模型将VFM预测误差降低高达13倍,物理约束减少负流量预测65%。流量模式分类达到97.7%的井底准确率,提供无额外传感器的连续井完整性监控。该方法可转移至五个Equinor Volve生产者的实际运营数据(油速率R²=0.89,井底压力R²=0.98,水速率R²=0.97)。训练模型还可作为快速替代方案,用于具有完整性意识的井设计优化,覆盖24维设计空间,速度比漂移-流模拟快超过1000倍。这些结果表明,设计意识、物理约束和多任务学习是跨大规模井组运营的基础模型关键且互补的成分。

英文摘要:

Deploying machine learning models across diverse well portfolios requires generalisation to wells with design parameters outside the training distribution. Current data-driven approaches to virtual flow metering (VFM) and bottomhole estimation typically treat each well independently or ignore the influence of well design on operational behaviour. We present WISE (Well Intelligence and Systems Engineering Foundation Model), a design-aware, physics-informed multi-task model that integrates three complementary mechanisms: Feature-wise Linear Modulation (FiLM) and cross-modal attention to condition operational embeddings on well design parameters; multi-task learning for simultaneous prediction of flow rates, bottomhole conditions, and flow regime classification; and structural mass conservation with soft physics constraints derived from well engineering principles. Evaluation on the ManyWells benchmark (2000 simulated wells, $10^6$ data points) demonstrates that design-aware models reduce VFM prediction error by up to $13\times$ compared to design-unaware baselines, and that physics constraints reduce negative flow predictions by 65%. Flow regime classification achieves 97.7% bottomhole accuracy, providing continuous well integrity monitoring without additional sensors. The methodology transfers to real operational data from five Equinor Volve producers (oil rate $R^2 = 0.89$, bottomhole pressure $R^2 = 0.98$, water rate $R^2 = 0.97$). The trained model additionally serves as a fast surrogate for integrity-aware well design optimisation over a 24-dimensional design space, with more than $1000\times$ speedup over drift-flux simulations. These results demonstrate that design awareness, physics enforcement, and multi-task learning are essential and complementary ingredients for foundation models intended to operate across large well portfolios.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑