arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2603.24323astro-ph.EPastro-ph.IMcs.LG
收藏

通过超光谱成像和机器学习连接陨石光谱与月球表面成分

Connecting Meteorite Spectra to Lunar Surface Composition Using Hyperspectral Imaging and Machine Learning

Leiden Institute of Advanced Computer Science(莱顿高级计算机科学研究所);Leiden University(莱顿大学);Delft University of Technology(代尔夫特理工大学);Leiden Observatory(莱顿天文台);Dipartimento di Fisica e Astronomia ``G. Galilei'', Università di Padova(帕多瓦大学盖·伽利略物理与天文学系);INFN-Padova(意大利国家核物理研究所-帕多瓦分部);Huygens-Kamerlingh Onnes Laboratory(胡伊gens-卡默林赫夫实验室);ERA Chair of Space Photonics(空间光子学ERA教授职位);Latvia University(拉脱维亚大学);National Technical University of Athens(雅典国家技术大学)

Fatemeh Fazel Hesar, Mojtaba Raouf, Amirmohammad Chegeni, Peyman Soltani, Bernard Foing, Elias Chatzitheodoridis, Michiel J. A. de Dood, Fons J. Verbeek

AI总结:

本文提出一种整合实验室超光谱成像与地面月球超光谱成像及监督机器学习的方法,生成高保真的矿物图。利用支持向量机等算法对陨石样本进行分类,识别关键波长并验证月球表面矿物分布。

摘要:

我们提出了一种创新且成本效益高的框架,整合实验室的Bechar010月球陨石超光谱成像与地面月球超光谱成像以及监督机器学习,以生成高保真的矿物图。使用显微镜和30mm焦距镜头,在150mm工作距离下对Bechar010的3mm薄片进行成像,通过6倍积分提高信噪比,生成数据立方体(X×Y×λ=791×1024×224,0.24mm×0.2mm分辨率),覆盖400-1000nm(224个波段,2.7nm光谱采样,5.5nm全宽半高光谱分辨率)使用Specim FX10相机。地面月球超光谱成像使用Celestron 8SE望远镜(3km/pixel),生成数据立方体(371×1024×224)。通过使用Spectralon参考(99%反射率<2%误差)进行太阳校准,确保准确的反射光谱。支持向量机(SVM)使用径向基函数内核,在专家标记的光谱上训练,实现了Bechar 010中橄榄石(92%精度,90%召回率)和辉石(88%精度,86%召回率)的93.7%分类准确率(5折交叉验证)。LIME分析确定了关键波长(例如,485nm,22.4%用于M3;715nm,20.6%用于M6)在10个预选区域(M1到M10)中,表明橄榄石丰富(高地类似)和辉石丰富( mare 类似)的成分。SAM分析揭示了从0.26弧度到0.66弧度的角度,将M3和M9与高地联系起来,将M6和M10与mare联系起来。月球数据的K-means聚类识别出10个矿物学簇(88%准确率),验证了Chandrayaan-1 Moon矿物图谱(M³)数据(140m/pixel,10nm光谱分辨率)。一种新的推扫超光谱成像方法使用望远镜实现了0.8弧秒的月球光谱分辨率,启发了全天空多目标光谱制图。

英文摘要:

We present an innovative, cost-effective framework integrating laboratory Hyperspectral Imaging (HSI) of the Bechar010 Lunar meteorite with ground-based lunar HSI and supervised Machine Learning(ML) to generate high-fidelity mineralogical maps. A 3mm thin section of Bechar010 was imaged under a microscope with a 30mm focal length lens at 150mm working distance, using 6x binning to increase the signal-to-noise ratio, producing a data cube (X $\times$ Y $\times$ $λ$ = $791 \times 1024 \times 224$, 0.24mm $\times$ 0.2mm resolution) across 400-1000}nm (224 bands, 2.7nm spectral sampling, 5.5nm full width at half maximum spectral resolution) using a Specim FX10 camera. Ground-based lunar HSI was captured with a Celestron 8SE telescope (3km/pixel), yielded a data cube ($371 \times 1024 \times 224$). Solar calibration was performed using a Spectralon reference ({99}\% reflectance {<2}\% error) ensured accurate reflectance spectra. A Support Vector Machine (SVM) with a radial basis function kernel, trained on expert-labeled spectra, achieved {93.7}\% classification accuracy(5-fold cross-validation) for olivine ({92}\% precision, {90}\% recall) and pyroxene ({88}\% precision, {86}{\%} recall) in Bechar 010. LIME analysis identified key wavelengths (e.g., 485nm, {22.4}\% for M3; 715nm, {20.6}\% for M6) across 10 pre-selected regions (M1 to M10), indicating olivine-rich (Highland-like) and pyroxene-rich (Mare-like) compositions. SAM analysis revealed angles from 0.26 radian to 0.66 radian, linking M3 and M9 to Highlands and M6 and M10 to Mares. K-means clustering of Lunar data identified 10 mineralogical clusters ({88}\% accuracy), validated against Chandrayaan-1 Moon mineralogy Mapper ($\rm M^3$) data (140m/pixel, 10nm spectral resolution).A novel push-broom HSI approach with a telescope achieves 0.8 arcsec resolution for lunar spectroscopy, inspiring full-sky multi-object spectral mapping.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑