Learning to manipulate cloth is both a paradigmatic problem for robotic research and a problem of immediate relevance to a variety of applications ranging from assistive care to the service industry. The complex physics of the deformable object makes this problem of cloth manipulation nontrivial. In order to create a general manipulation strategy that addresses a variety of shapes, sizes, fold and wrinkle patterns, in addition to the usual problems of appearance variations, it becomes important to carefully consider model structure and their implications for generalisation performance. In this paper, we present an approach to in-air cloth manipulation that uses a variation of a recently proposed reinforcement learning architecture, DreamerV2. Our implementation modifies this architecture to utilise surface normals input, in addition to modiying the replay buffer and data augmentation procedures. Taken together these modifications represent an enhancement to the world model used by the robot, addressing the physical complexity of the object being manipulated by the robot. We present evaluations both in simulation and in a zero-shot deployment of the trained policies in a physical robot setup, performing in-air unfolding of a variety of different cloth types, demonstrating the generalisation benefits of our proposed architecture.
High-velocity dynamic actions (e.g., fling or throw) play a crucial role in our everyday interaction with deformable objects by improving our efficiency and effectively expanding our physical reach range. Yet, most prior works have tackled cloth manipulation using exclusively single-arm quasi-static actions, which requires a large number of interactions for challenging initial cloth configurations and strictly limits the maximum cloth size by the robot's reach range. In this work, we demonstrate the effectiveness of dynamic flinging actions for cloth unfolding with our proposed self-supervised…
Institut de Robòtica i Informàtica Industrial, CSIC-UPC（西班牙国家研究委员会-加泰罗尼亚理工大学工业机器人与信息学研究所）；Worcester Polytechnic Institute（伍斯特理工学院）；University of Massachusetts Lowell（马萨诸塞大学洛厄尔分校）
Benchmarking of robotic manipulations is one of the open issues in robotic research. An important factor that has enabled progress in this area in the last decade is the existence of common object sets that have been shared among different research groups. However, the existing object sets are very limited when it comes to cloth-like objects that have unique particularities and challenges. This paper is a first step towards the design of a cloth object set to be distributed among research groups from the robotics cloth manipulation community. We present a set of household cloth objects and rel…
Vision-Based 6-DoF Grasp Pose Estimation for Robot Cloth Unfolding
Faculty of Computer and Information Science, University of Ljubljana（卢布尔雅那大学计算机与信息科学学院）；Jožef Stefan International Postgraduate School（约热夫·斯特凡国际研究生院）；Jožef Stefan Institute（约热夫·斯特凡研究所）
Columbia University（哥伦比亚大学）；Toyota Research Institute（丰田研究所）
Automating garment manipulation is challenging due to extremely high variability in object configurations. To reduce this intrinsic variation, we introduce the task of "canonicalized-alignment" that simplifies downstream applications by reducing the possible garment configurations. This task can be considered as "cloth state funnel" that manipulates arbitrarily configured clothing items into a predefined deformable configuration (i.e. canonicalization) at an appropriate rigid pose (i.e. alignment). In the end, the cloth items will result in a compact set of structured and highly visible config…
Unfolding the Literature: A Review of Robotic Cloth Manipulation
KTH Royal Institute of Technology（瑞典皇家理工学院）；Carnegie Mellon University（卡内基梅隆大学）；Institut de Robòtica i Informàtica Industrial, CSIC-UPC（西班牙国家研究委员会-加泰罗尼亚理工大学机器人与工业自动化研究所）；University of Copenhagen（哥本哈根大学）
University of North Carolina at Chapel Hill（北卡罗来纳大学教堂山分校）；City University of Hong Kong（香港城市大学）
The complex physical properties of highly deformable materials such as clothes pose significant challenges fanipulation systems. We present a novel visual feedback dictionary-based method for manipulating defoor autonomous robotic mrmable objects towards a desired configuration. Our approach is based on visual servoing and we use an efficient technique to extract key features from the RGB sensor stream in the form of a histogram of deformable model features. These histogram features serve as high-level representations of the state of the deformable material. Next, we collect manipulation data …
University of Maryland at College Park（马里兰大学帕克分校）；University of North Carolina at Chapel Hill（北卡罗来纳大学教堂山分校）；City University of Hong Kong（香港城市大学）；the University of Hong Kong（香港大学）
We present a novel approach for robust manipulation of high-DOF deformable objects such as cloth. Our approach uses a random forest-based controller that maps the observed visual features of the cloth to an optimal control action of the manipulator. The topological structure of this random forest-based controller is determined automatically based on the training data consisting visual features and optimal control actions. This enables us to integrate the overall process of training data classification and controller optimization into an imitation learning (IL) approach. Our approach enables le…
Columbia University（哥伦比亚大学）；Toyota Research Institute（丰田研究院）
This paper introduces DextAIRity, an approach to manipulate deformable objects using active airflow. In contrast to conventional contact-based quasi-static manipulations, DextAIRity allows the system to apply dense forces on out-of-contact surfaces, expands the system's reach range, and provides safe high-speed interactions. These properties are particularly advantageous when manipulating under-actuated deformable objects with large surface areas or volumes. We demonstrate the effectiveness of DextAIRity through two challenging deformable object manipulation tasks: cloth unfolding and bag open…
Self-occlusion is challenging for cloth manipulation, as it makes it difficult to estimate the full state of the cloth. Ideally, a robot trying to unfold a crumpled or folded cloth should be able to reason about the cloth's occluded regions. We leverage recent advances in pose estimation for cloth to build a system that uses explicit occlusion reasoning to unfold a crumpled cloth. Specifically, we first learn a model to reconstruct the mesh of the cloth. However, the model will likely have errors due to the complexities of the cloth configurations and due to ambiguities from occlusions. Our ma…
Manipulating deformable objects, such as ropes and clothing, is a long-standing challenge in robotics, because of their large degrees of freedom, complex non-linear dynamics, and self-occlusion in visual perception. The key difficulty is a suitable representation, rich enough to capture the object shape, dynamics for manipulation and yet simple enough to be estimated reliably from visual observations. This work aims to learn latent Graph dynamics for DefOrmable Object Manipulation (G-DOOM). G-DOOM approximates a deformable object as a sparse set of interacting keypoints, which are extracted au…
Robotic manipulation of highly deformable cloth presents a promising opportunity to assist people with several daily tasks, such as washing dishes; folding laundry; or dressing, bathing, and hygiene assistance for individuals with severe motor impairments. In this work, we introduce a formulation that enables a collaborative robot to perform visual haptic reasoning with cloth -- the act of inferring the location and magnitude of applied forces during physical interaction. We present two distinct model representations, trained in physics simulation, that enable haptic reasoning using only visua…
An appropriate user interface to collect human demonstration data for deformable object manipulation has been mostly overlooked in the literature. We present an interaction design for demonstrating cloth folding to robots. Users choose pick and place points on the cloth and can preview a visualization of a simulated cloth before real-robot execution. Two interfaces are proposed: A 2D display-and-mouse interface where points are placed by clicking on an image of the cloth, and a 3D Augmented Reality interface where the chosen points are placed by hand gestures. We conduct a user study with 18 p…
University of California, Berkeley（加州大学伯克利分校）；New York University（纽约大学）
Using visual model-based learning for deformable object manipulation is challenging due to difficulties in learning plannable visual representations along with complex dynamic models. In this work, we propose a new learning framework that jointly optimizes both the visual representation model and the dynamics model using contrastive estimation. Using simulation data collected by randomly perturbing deformable objects on a table, we learn latent dynamics models for these objects in an offline fashion. Then, using the learned models, we use simple model-based planning to solve challenging deform…
Institut de Robòtica i Informàtica Industrial, CSIC-UPC（西班牙国家研究委员会-加泰罗尼亚理工大学工业机器人与信息技术研究所）；Universitat Politècnica de Catalunya - BarcelonaTECH（加泰罗尼亚理工大学-巴塞罗那理工学院）
Robotic cloth manipulation is a relevant challenging problem for autonomous robotic systems. Highly deformable objects as textile items can adopt multiple configurations and shapes during their manipulation. Hence, robots should not only understand the current cloth configuration but also be able to predict the future possible behaviors of the cloth. This paper addresses the problem of indirectly controlling the configuration of certain points of a textile object, by applying actions on other parts of the object through the use of a Model Predictive Control (MPC) strategy, which also allows to…
Institut de Robòtica i Informàtica Industrial, CSIC-UPC（西班牙国家研究委员会-加泰罗尼亚理工大学机器人与工业信息研究所）；Halmstad University（哈尔姆斯塔德大学）
Understanding of deformable object manipulations such as textiles is a challenge due to the complexity and high dimensionality of the problem. Particularly, the lack of a generic representation of semantic states (e.g., \textit{crumpled}, \textit{diagonally folded}) during a continuous manipulation process introduces an obstacle to identify the manipulation type. In this paper, we aim to solve the problem of semantic state estimation in cloth manipulation tasks. For this purpose, we introduce a new large-scale fully-annotated RGB image dataset showing various human demonstrations of different …
Physics Residual Dynamics and Reduced Order Whole-Body Planning for Obstacle Aware Human Robot Cloth CoTransportation
Mohamed bin Zayed University of Artificial Intelligence (MBZUAI)（穆罕默德·本·扎耶德人工智能大学）；Technical University of Munich (TUM)（慕尼黑工业大学）；Tampere University（坦佩雷大学）；Aalto University（阿尔托大学）
Robotic manipulation of deformable objects is a difficult problem especially because of the complexity of the many different ways an object can deform. Searching such a high dimensional state space makes it difficult to recognize, track, and manipulate deformable objects. In this paper, we introduce a predictive, model-driven approach to address this challenge, using a pre-computed, simulated database of deformable object models. Mesh models of common deformable garments are simulated with the garments picked up in multiple different poses under gravity, and stored in a database for fast and e…
SSFold: Learning to Fold Arbitrary Crumpled Cloth Using Graph Dynamics from Human Demonstration
Shanghai Research Institute for Intelligent Autonomous Systems（上海智能自主系统研究院）；National Key Laboratory of Autonomous Intelligent Unmanned Systems (Tongji University)（自主智能无人系统国家重点实验室（同济大学））；Frontiers Science Center for Intelligent Autonomous Systems（智能自主系统前沿科学中心）；College of Electronics and Information Engineering, Tongji University（同济大学电子信息工程学院）
We present a novel Learning from Demonstration (LfD) method, Deformable Manipulation from Demonstrations (DMfD), to solve deformable manipulation tasks using states or images as inputs, given expert demonstrations. Our method uses demonstrations in three different ways, and balances the trade-off between exploring the environment online and using guidance from experts to explore high dimensional spaces effectively. We test DMfD on a set of representative manipulation tasks for a 1-dimensional rope and a 2-dimensional cloth from the SoftGym suite of tasks, each with state and image observations…
Robotic manipulation of deformable objects remains a challenging task. One such task is to iron a piece of cloth autonomously. Given a roughly flattened cloth, the goal is to have an ironing plan that can iteratively apply a regular iron to remove all the major wrinkles by a robot. We present a novel solution to analyze the cloth surface by fusing two surface scan techniques: a curvature scan and a discontinuity scan. The curvature scan can estimate the height deviation of the cloth surface, while the discontinuity scan can effectively detect sharp surface features, such as wrinkles. We use th…
We have seen much recent progress in rigid object manipulation, but interaction with deformable objects has notably lagged behind. Due to the large configuration space of deformable objects, solutions using traditional modelling approaches require significant engineering work. Perhaps then, bypassing the need for explicit modelling and instead learning the control in an end-to-end manner serves as a better approach? Despite the growing interest in the use of end-to-end robot learning approaches, only a small amount of work has focused on their applicability to deformable object manipulation. M…
Tsinghua University（清华大学）；University of California, Berkeley（加州大学伯克利分校）
Point set registration is a powerful method that enables robots to manipulate deformable objects. By mapping the point cloud of the current object to the pre-trained point cloud, a transformation function can be constructed. The manipulator's trajectory for pre-trained shapes can be warped with this transformation function, yielding a feasible trajectory for the new shape. However, usually this transformation function regards objects as discrete points, and dismisses the topological structures. Therefore, it risks over-stretching or over-compression during manipulation. To tackle this problem,…
National University of Singapore（新加坡国立大学）；Sea AI Lab（Sea人工智能实验室）
Deformable Object Manipulation (DOM) is of significant importance to both daily and industrial applications. Recent successes in differentiable physics simulators allow learning algorithms to train a policy with analytic gradients through environment dynamics, which significantly facilitates the development of DOM algorithms. However, existing DOM benchmarks are either single-object-based or non-differentiable. This leaves the questions of 1) how a task-specific algorithm performs on other tasks and 2) how a differentiable-physics-based algorithm compares with the non-differentiable ones in ge…
DeformGS: Scene Flow in Highly Deformable Scenes for Deformable Object Manipulation
Carnegie Mellon University（卡内基梅隆大学）；Stanford University（斯坦福大学）；National University of Singapore（新加坡国立大学）；Technical University of Munich（慕尼黑工业大学）；NVIDIA（英伟达）
Columbia University（哥伦比亚大学）；Toyota Research Institute（丰田研究院）
This paper tackles the task of goal-conditioned dynamic manipulation of deformable objects. This task is highly challenging due to its complex dynamics (introduced by object deformation and high-speed action) and strict task requirements (defined by a precise goal specification). To address these challenges, we present Iterative Residual Policy (IRP), a general learning framework applicable to repeatable tasks with complex dynamics. IRP learns an implicit policy via delta dynamics -- instead of modeling the entire dynamical system and inferring actions from that model, IRP learns delta dynamic…
Carnegie Mellon University（卡内基梅隆大学）；Stanford University（斯坦福大学）；NVIDIA（英伟达）；University of Washington（华盛顿大学）；The University of Sydney（悉尼大学）
Deformable object manipulation remains a challenging task in robotics research. Conventional techniques for parameter inference and state estimation typically rely on a precise definition of the state space and its dynamics. While this is appropriate for rigid objects and robot states, it is challenging to define the state space of a deformable object and how it evolves in time. In this work, we pose the problem of inferring physical parameters of deformable objects as a probabilistic inference task defined with a simulator. We propose a novel methodology for extracting state information from …
We present a framework for deformable object manipulation that interleaves planning and control, enabling complex manipulation tasks without relying on high-fidelity modeling or simulation. The key question we address is when should we use planning and when should we use control to achieve the task? Planners are designed to find paths through complex configuration spaces, but for highly underactuated systems, such as deformable objects, achieving a specific configuration is very difficult even with high-fidelity models. Conversely, controllers can be designed to achieve specific configurations…
We explore learning pixelwise correspondences between images of deformable objects in different configurations. Traditional correspondence matching approaches such as SIFT, SURF, and ORB can fail to provide sufficient contextual information for fine-grained manipulation. We propose Multi-Modal Gaussian Shape Descriptor (MMGSD), a new visual representation of deformable objects which extends ideas from dense object descriptors to predict all symmetric correspondences between different object configurations. MMGSD is learned in a self-supervised manner from synthetic data and produces correspond…
In order to manipulate a deformable object, such as rope or cloth, in unstructured environments, robots need a way to estimate its current shape. However, tracking the shape of a deformable object can be challenging because of the object's high flexibility, (self-)occlusion, and interaction with obstacles. Building a high-fidelity physics simulation to aid in tracking is difficult for novel environments. Instead we focus on tracking the object based on RGBD images and geometric motion estimates and obstacles. Our key contributions over previous work in this vein are: 1) A better way to handle …
Purdue University（普渡大学）；Massachusetts Institute of Technology（麻省理工学院）
Cloth in the real world is often crumpled, self-occluded, or folded in on itself such that key regions, such as corners, are not directly graspable, making manipulation difficult. We propose a system that leverages visual and tactile perception to unfold the cloth via grasping and sliding on edges. By doing so, the robot is able to grasp two adjacent corners, enabling subsequent manipulation tasks like folding or hanging. As components of this system, we develop tactile perception networks that classify whether an edge is grasped and estimate the pose of the edge. We use the edge classificatio…
Model-Free Large-Scale Cloth Spreading With Mobile Manipulation: Initial Feasibility Study
The Chinese University of Hong Kong（香港中文大学）；Multi-Scale Medical Robotics Center（多尺度医疗机器人中心）；Westlake University（西湖大学）；The Hong Kong University of Science and Technology（香港科技大学）
RhoMorph: Rhombus-shaped Deformable Modular Robots for Stable, Medium-Independent Reconfiguration Motion
Institute of AI and Robotics, Academy for Engineering & Technology, Fudan University（人工智能与机器人研究院，工程与技术学院，复旦大学）；School of Science and Engineering, The Chinese University of Hong Kong, Shenzhen（科学与工程学院，香港中文大学（深圳））；Shenzhen Institute of Artificial Intelligence and Robotics for Society（社会人工智能与机器人研究所）；Department of Mechanical Engineering, The Hong Kong Polytechnic University（机械工程系，香港理工大学）
In this paper we tackle the problem of deformable object manipulation through model-free visual reinforcement learning (RL). In order to circumvent the sample inefficiency of RL, we propose two key ideas that accelerate learning. First, we propose an iterative pick-place action space that encodes the conditional relationship between picking and placing on deformable objects. The explicit structural encoding enables faster learning under complex object dynamics. Second, instead of jointly learning both the pick and the place locations, we only explicitly learn the placing policy conditioned on …
Tencent Robotics X Lab（腾讯机器人X实验室）；Tsinghua Shenzhen International Graduate School（清华大学深圳国际研究生院）
Object rearranging is one of the most common deformable manipulation tasks, where the robot needs to rearrange a deformable object into a goal configuration. Previous studies focus on designing an expert system for each specific task by model-based or data-driven approaches and the application scenarios are therefore limited. Some research has been attempting to design a general framework to obtain more advanced manipulation capabilities for deformable rearranging tasks, with lots of progress achieved in simulation. However, transferring from simulation to reality is difficult due to the limit…
