Model Predictive Control for Dynamic Cloth Manipulation: Parameter Learning and Experimental Validation
Institut de Robòtica i Informàtica Industrial, CSIC-UPC（西班牙国家研究委员会-加泰罗尼亚理工大学工业机器人与信息技术研究所）；Universitat Politècnica de Catalunya - BarcelonaTECH（加泰罗尼亚理工大学-巴塞罗那理工学院）
Adrià Luque, David Parent, Adrià Colomé, Carlos Ocampo-Martinez, Carme Torras
Robotic cloth manipulation is a relevant challenging problem for autonomous robotic systems. Highly deformable objects as textile items can adopt multiple configurations and shapes during their manipulation. Hence, robots should not only understand the current cloth configuration but also be able to predict the future possible behaviors of the cloth. This paper addresses the problem of indirectly controlling the configuration of certain points of a textile object, by applying actions on other parts of the object through the use of a Model Predictive Control (MPC) strategy, which also allows to foresee the behavior of indirectly controlled points. The designed controller finds the optimal control signals to attain the desired future target configuration. The explored scenario in this paper considers tracking a reference trajectory with the lower corners of a square piece of cloth by grasping its upper corners. To do so, we propose and validate a linear cloth model that allows solving the MPC-related optimization problem in real time. Reinforcement Learning (RL) techniques are used to learn the optimal parameters of the proposed cloth model and also to tune the resulting MPC. After obtaining accurate tracking results in simulation, the full control scheme was implemented and executed in a real robot, obtaining accurate tracking even in adverse conditions. While total observed errors reach the 5 cm mark, for a 30x30 cm cloth, an analysis shows the MPC contributes less than 30% to that value.
Manipulating deformable objects, such as ropes and clothing, is a long-standing challenge in robotics, because of their large degrees of freedom, complex non-linear dynamics, and self-occlusion in visual perception. The key difficulty is a suitable representation, rich enough to capture the object shape, dynamics for manipulation and yet simple enough to be estimated reliably from visual observations. This work aims to learn latent Graph dynamics for DefOrmable Object Manipulation (G-DOOM). G-DOOM approximates a deformable object as a sparse set of interacting keypoints, which are extracted au…
Institut de Robòtica i Informàtica Industrial, CSIC-UPC（西班牙国家研究委员会-加泰罗尼亚理工大学工业机器人与信息学研究所）；Worcester Polytechnic Institute（伍斯特理工学院）；University of Massachusetts Lowell（马萨诸塞大学洛厄尔分校）
Benchmarking of robotic manipulations is one of the open issues in robotic research. An important factor that has enabled progress in this area in the last decade is the existence of common object sets that have been shared among different research groups. However, the existing object sets are very limited when it comes to cloth-like objects that have unique particularities and challenges. This paper is a first step towards the design of a cloth object set to be distributed among research groups from the robotics cloth manipulation community. We present a set of household cloth objects and rel…
The path planning problems arising in manipulation planning and in task and motion planning settings are typically repetitive: the same manipulator moves in a space that only changes slightly. Despite this potential for reuse of information, few planners fully exploit the available information. To better enable this reuse, we decompose the collision checking into reusable, and non-reusable parts. We then treat the sequences of path planning problems in manipulation planning as a multiquery path planning problem. This allows the usage of planners that actively minimize planning effort over mult…
Learning Generalizable Language-Conditioned Cloth Manipulation from Long Demonstrations
Center for Artificial Intelligence and Robotics, Tsinghua Shenzhen International Graduate School（清华大学深圳国际研究生院人工智能与机器人中心）；School of Computing, National University of Singapore（新加坡国立大学计算机学院）
Robotic manipulation of cloth has applications ranging from fabrics manufacturing to handling blankets and laundry. Cloth manipulation is challenging for robots largely due to their high degrees of freedom, complex dynamics, and severe self-occlusions when in folded or crumpled configurations. Prior work on robotic manipulation of cloth relies primarily on vision sensors alone, which may pose challenges for fine-grained manipulation tasks such as grasping a desired number of cloth layers from a stack of cloth. In this paper, we propose to use tactile sensing for cloth manipulation; we attach a…
High-velocity dynamic actions (e.g., fling or throw) play a crucial role in our everyday interaction with deformable objects by improving our efficiency and effectively expanding our physical reach range. Yet, most prior works have tackled cloth manipulation using exclusively single-arm quasi-static actions, which requires a large number of interactions for challenging initial cloth configurations and strictly limits the maximum cloth size by the robot's reach range. In this work, we demonstrate the effectiveness of dynamic flinging actions for cloth unfolding with our proposed self-supervised…
University of Maryland at College Park（马里兰大学帕克分校）；University of North Carolina at Chapel Hill（北卡罗来纳大学教堂山分校）；City University of Hong Kong（香港城市大学）；the University of Hong Kong（香港大学）
We present a novel approach for robust manipulation of high-DOF deformable objects such as cloth. Our approach uses a random forest-based controller that maps the observed visual features of the cloth to an optimal control action of the manipulator. The topological structure of this random forest-based controller is determined automatically based on the training data consisting visual features and optimal control actions. This enables us to integrate the overall process of training data classification and controller optimization into an imitation learning (IL) approach. Our approach enables le…
Institut de Robòtica i Informàtica Industrial, CSIC-UPC（工业机器人与信息研究所（西班牙国家研究委员会-加泰罗尼亚理工大学））
Compliant and soft hands have gained a lot of attention in the past decade because of their ability to adapt to the shape of the objects, increasing their effectiveness for grasping. However, when it comes to grasping highly flexible objects such as textiles, we face the dual problem: it is the object that will adapt to the shape of the hand or gripper. In this context, the classic grasp analysis or grasping taxonomies are not suitable for describing textile objects grasps. This work proposes a novel definition of textile object grasps that abstracts from the robotic embodiment or hand shape a…
Institut de Robòtica i Informàtica Industrial, CSIC-UPC（西班牙国家研究委员会-巴塞罗那自治大学工业机器人与信息技术研究所）
In this paper we present a Deep Reinforcement Learning approach to solve dynamic cloth manipulation tasks. Differing from the case of rigid objects, we stress that the followed trajectory (including speed and acceleration) has a decisive influence on the final state of cloth, which can greatly vary even if the positions reached by the grasped points are the same. We explore how goal positions for non-grasped points can be attained through learning adequate trajectories for the grasped points. Our approach uses few demonstrations to improve control policy learning, and a sparse reward approach …
Institut de Robòtica i Informàtica Industrial, CSIC-UPC（西班牙高等科学研究理事会-加泰罗尼亚理工大学工业机器人与信息学研究所）
Cloth manipulation is very relevant for domestic robotic tasks, but it presents many challenges due to the complexity of representing, recognizing and predicting the behaviour of cloth under manipulation. In this work, we propose a generic, compact and simplified representation of the states of cloth manipulation that allows for representing tasks as sequences of states and transitions. We also define a Cloth Manipulation Graph that encodes all the strategies to accomplish a task. Our novel representation is used to encode two different cloth manipulation tasks, learned from an experiment with…
Columbia University（哥伦比亚大学）；Toyota Research Institute（丰田研究所）
Automating garment manipulation is challenging due to extremely high variability in object configurations. To reduce this intrinsic variation, we introduce the task of "canonicalized-alignment" that simplifies downstream applications by reducing the possible garment configurations. This task can be considered as "cloth state funnel" that manipulates arbitrarily configured clothing items into a predefined deformable configuration (i.e. canonicalization) at an appropriate rigid pose (i.e. alignment). In the end, the cloth items will result in a compact set of structured and highly visible config…
We address the problem of goal-directed cloth manipulation, a challenging task due to the deformability of cloth. Our insight is that optical flow, a technique normally used for motion estimation in video, can also provide an effective representation for corresponding cloth poses across observation and goal images. We introduce FabricFlowNet (FFN), a cloth manipulation policy that leverages flow as both an input and as an action representation to improve performance. FabricFlowNet also elegantly switches between bimanual and single-arm actions based on the desired goal. We show that FabricFlow…
Nara Institute of Science and Technology（奈良先端科学技术大学院大学）
Generative Adversarial Imitation Learning (GAIL) can learn policies without explicitly defining the reward function from demonstrations. GAIL has the potential to learn policies with high-dimensional observations as input, e.g., images. By applying GAIL to a real robot, perhaps robot policies can be obtained for daily activities like washing, folding clothes, cooking, and cleaning. However, human demonstration data are often imperfect due to mistakes, which degrade the performance of the resulting policies. We address this issue by focusing on the following features: 1) many robotic tasks are …
Institut de Robòtica i Informàtica Industrial, CSIC-UPC（西班牙国家研究委员会-加泰罗尼亚理工大学机器人与工业信息研究所）；Halmstad University（哈尔姆斯塔德大学）
Understanding of deformable object manipulations such as textiles is a challenge due to the complexity and high dimensionality of the problem. Particularly, the lack of a generic representation of semantic states (e.g., \textit{crumpled}, \textit{diagonally folded}) during a continuous manipulation process introduces an obstacle to identify the manipulation type. In this paper, we aim to solve the problem of semantic state estimation in cloth manipulation tasks. For this purpose, we introduce a new large-scale fully-annotated RGB image dataset showing various human demonstrations of different …
Tsinghua Shenzhen International Graduate School（清华大学深圳国际研究生院）；Research Institute of Tsinghua University in Shenzhen（清华大学深圳研究院）
Sequential multi-step cloth manipulation is a challenging problem in robotic manipulation, requiring a robot to perceive the cloth state and plan a sequence of chained actions leading to the desired state. Most previous works address this problem in a goal-conditioned way, and goal observation must be given for each specific task and cloth configuration, which is not practical and efficient. Thus, we present a novel multi-step cloth manipulation planning framework named Foldformer. Foldformer can complete similar tasks with only a general demonstration and utilize a space-time attention mechan…
Self-occlusion is challenging for cloth manipulation, as it makes it difficult to estimate the full state of the cloth. Ideally, a robot trying to unfold a crumpled or folded cloth should be able to reason about the cloth's occluded regions. We leverage recent advances in pose estimation for cloth to build a system that uses explicit occlusion reasoning to unfold a crumpled cloth. Specifically, we first learn a model to reconstruct the mesh of the cloth. However, the model will likely have errors due to the complexities of the cloth configurations and due to ambiguities from occlusions. Our ma…
Unfolding the Literature: A Review of Robotic Cloth Manipulation
KTH Royal Institute of Technology（瑞典皇家理工学院）；Carnegie Mellon University（卡内基梅隆大学）；Institut de Robòtica i Informàtica Industrial, CSIC-UPC（西班牙国家研究委员会-加泰罗尼亚理工大学机器人与工业自动化研究所）；University of Copenhagen（哥本哈根大学）
Model-Free Large-Scale Cloth Spreading With Mobile Manipulation: Initial Feasibility Study
The Chinese University of Hong Kong（香港中文大学）；Multi-Scale Medical Robotics Center（多尺度医疗机器人中心）；Westlake University（西湖大学）；The Hong Kong University of Science and Technology（香港科技大学）
We consider the problem of open-goal planning for robotic cloth manipulation. Core of our system is a neural network trained as a forward model of cloth behaviour under manipulation, with planning performed through backpropagation. We introduce a neural network-based routine for estimating mesh representations from voxel input, and perform planning in mesh format internally. We address the problem of planning with incomplete domain knowledge by means of an explicit epistemic uncertainty signal. This signal is calculated from prediction divergence between two instances of the forward model netw…
We present a damage-aware planning approach which determines the best sequence to manipulate a number of objects in a scene. This works on task-planning level, abstracts from motion planning and anticipates the dynamics of the scene using a physics simulation. Instead of avoiding interaction with the environment, we take unintended motion of other objects into account and plan manipulation sequences which minimize the potential damage. Our method can also be used as a validation measure to judge planned motions for their feasibility in terms of damage avoidance. We evaluate our approach on one…
SSFold: Learning to Fold Arbitrary Crumpled Cloth Using Graph Dynamics from Human Demonstration
Shanghai Research Institute for Intelligent Autonomous Systems（上海智能自主系统研究院）；National Key Laboratory of Autonomous Intelligent Unmanned Systems (Tongji University)（自主智能无人系统国家重点实验室（同济大学））；Frontiers Science Center for Intelligent Autonomous Systems（智能自主系统前沿科学中心）；College of Electronics and Information Engineering, Tongji University（同济大学电子信息工程学院）
Robotic manipulation of cloth is a challenging task due to the high dimensionality of the configuration space and the complexity of dynamics affected by various material properties. The effect of complex dynamics is even more pronounced in dynamic folding, for example, when a square piece of fabric is folded in two by a single manipulator. To account for the complexity and uncertainties, feedback of the cloth state using e.g. vision is typically needed. However, construction of visual feedback policies for dynamic cloth folding is an open problem. In this paper, we present a solution that lear…
Legged robots have shown remarkable advantages in navigating uneven terrain. However, realizing effective locomotion and manipulation tasks on quadruped robots is still challenging. In addition, object and terrain parameters are generally unknown to the robot in these problems. Therefore, this paper proposes a hierarchical adaptive control framework that enables legged robots to perform loco-manipulation tasks without any given assumption on the object's mass, the friction coefficient, or the slope of the terrain. In our approach, we first present an adaptive manipulation control to regulate t…
Purdue University（普渡大学）；Massachusetts Institute of Technology（麻省理工学院）
Cloth in the real world is often crumpled, self-occluded, or folded in on itself such that key regions, such as corners, are not directly graspable, making manipulation difficult. We propose a system that leverages visual and tactile perception to unfold the cloth via grasping and sliding on edges. By doing so, the robot is able to grasp two adjacent corners, enabling subsequent manipulation tasks like folding or hanging. As components of this system, we develop tactile perception networks that classify whether an edge is grasped and estimate the pose of the edge. We use the edge classificatio…
State estimation is one of the greatest challenges for cloth manipulation due to cloth's high dimensionality and self-occlusion. Prior works propose to identify the full state of crumpled clothes by training a mesh reconstruction model in simulation. However, such models are prone to suffer from a sim-to-real gap due to differences between cloth simulation and the real world. In this work, we propose a self-supervised method to finetune a mesh reconstruction model in the real world. Since the full mesh of crumpled cloth is difficult to obtain in the real world, we design a special data collect…
Disentangling perception and reasoning for improving data efficiency in learning cloth manipulation without demonstrations
Advanced Robotics, Istituto Italiano di Tecnologia (IIT)（先进机器人技术研究所（IIT））；epartment of Mechanical and Automation Engineering, T-Stone Robotics Institute, The Chinese University of Hong Kong（机械与自动化工程系，腾讯机器人研究院，香港中文大学）；University of Genova（热那亚大学）
Synthetic Data Generation and Vision-based Wrinkle and Keypoint Detection for Bimanual Cloth Manipulation
Department of Engineering, University of Luxembourg（卢森堡大学工程系）；School of Electrical and Electronic Engineering, Nanyang Technological University（南洋理工大学电子与电气工程学院）；Université de Lorraine, Arts et Metiers Institute of Technology, LCFC（洛林大学，艺术与工艺技术学院，LCFC）
Institut de Robòtica i Informàtica Industrial, CSIC-UPC（西班牙国家研究委员会-加泰罗尼亚理工大学工业机器人与信息学研究所）；Universitat Politècnica de Catalunya（加泰罗尼亚理工大学）
Robotic manipulation of cloth is a highly complex task because of its infinite-dimensional shape-state space that makes cloth state estimation very difficult. In this paper we introduce the dGLI Cloth Coordinates, a low-dimensional representation of the state of a rectangular piece of cloth that allows to efficiently distinguish key topological changes in a folding sequence, opening the door to efficient learning methods for cloth manipulation planning and control. Our representation is based on a directional derivative of the Gauss Linking Integral and allows us to represent both planar and s…
Columbia University（哥伦比亚大学）；Toyota Research Institute（丰田研究院）
This paper introduces DextAIRity, an approach to manipulate deformable objects using active airflow. In contrast to conventional contact-based quasi-static manipulations, DextAIRity allows the system to apply dense forces on out-of-contact surfaces, expands the system's reach range, and provides safe high-speed interactions. These properties are particularly advantageous when manipulating under-actuated deformable objects with large surface areas or volumes. We demonstrate the effectiveness of DextAIRity through two challenging deformable object manipulation tasks: cloth unfolding and bag open…
Vision-Based 6-DoF Grasp Pose Estimation for Robot Cloth Unfolding
Faculty of Computer and Information Science, University of Ljubljana（卢布尔雅那大学计算机与信息科学学院）；Jožef Stefan International Postgraduate School（约热夫·斯特凡国际研究生院）；Jožef Stefan Institute（约热夫·斯特凡研究所）
This paper presents a novel method to control humanoid robot dynamic loco-manipulation with multiple contact modes via multi-contact Model Predictive Control (MPC) framework. The proposed framework includes a multi-contact dynamics model capable of capturing various contact modes in loco-manipulation, such as hand-object contact and foot-ground contacts. Our proposed dynamics model represents the object dynamics as an external force acting on the system, which simplifies the model and makes it feasible for solving the MPC problem. In numerical validations, our multi-contact MPC framework only …
