arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2602.15626cond-mat.softphysics.flu-dyn
收藏

具有粘性对比的胶囊在线性流中的变形与取向:一种理论研究

Deformation and orientation of a capsule with viscosity contrast in linear flows: a theoretical study

Aix Marseille Univ, CNRS, CINAM(艾克斯-马赛大学,法国国家科学研究中心,核磁共振与分子相互作用中心)

Paul Regazzi, Marc Leonetti

AI总结:

研究了具有粘性对比的胶囊在线性流中的变形与取向,通过扰动理论分析弹性响应和表面张力的影响,揭示了泰勒参数与弹性毛细数及弯曲刚度的关系。

摘要:

我们发展了一种扰动理论来研究一个初始为球形的半径为R的胶囊在线性流中形状和取向。该胶囊具有粘性对比、表面张力σ和弯曲刚度κ。膜的弹性机械响应由三种弹性本构定律描述,即Hook型、Neohooke型或Skalak型,从而引入了表面剪切弹性模量Gs和泊松比(或类比量)。在主导阶次中,变形,即所谓的泰勒参数与弹性毛细数Ca成正比,该数评估了外部粘性应力与弹性膜响应的比值。在这一线性范围内,结果不依赖于弹性本构定律,如预期。在无表面张力和弯曲刚度的情况下,我们恢复了Barthes-Biesel & Rallison (1981)的结果,并特别指出泰勒参数不依赖于粘性对比λ,这与粘性液滴的情况不同。在我们更一般的模型中,变形在更高阶次中不再依赖于λ。现在,泰勒参数还依赖于另外两个无量纲数:表面弹性毛细比σ/Gs和无量纲弯曲刚度B=κ/GsR²。在进一步阶次中,胶囊与剪切流方向的倾角,即液滴的Chaffey和Brenner方程的类比,在每种情况下都确定。结果与基于边界积分法的数值计算结果高度一致,提供了一种验证数值发展的有用方法。

英文摘要:

We develop a perturbation theory to study the shape and the orientation of an initially spherical capsule of radius R with a viscosity contrast, a surface tension σ and a bending rigidity $κ$ in linear flows. The elastic mechanical response of membrane to deformations is described by three elastic constitutive law which are either Hookean, Neohookean or Skalak type leading to the introduction of a surface shear elastic modulus $G_s$ and the Poisson ratio (or analog quantities). At the leading order, the deformation, i.e. the so-called Taylor parameter is proportional to the elastic capillary number Ca which evaluates the ratio between the external viscous stress and the elastic membrane response. In this linear regime, the results do not depend on the elastic constitutive law as expected. Without surface tension and bending rigidity, we recover the results of Barthes-Biesel & Rallison (1981) and notably the fact that the Taylor parameter does not depend on the viscosity contrast $λ$ contrary to the case of a viscous droplet. In our more general model, the deformation does no longer depend on $λ$ at the upper order. Now, the Taylor parameter also depends on two other dimensionless numbers: the surface elastocapillary ratio $σ/G_s$ and the dimensionless bending rigidity $B= κ/G_sR^2$. At the further order, the angle of inclination of the capsule with the direction of the shear flow, the analog of the Chaffey and Brenner equation for droplets is determined in each case. The results are in excellent agreement with the numerical ones performed with a code based on the boundary integral method providing an useful method to valid numerical developments.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑