基于铝的超导隧道结传感器用于核 recoil 光谱学
Aluminum-Based Superconducting Tunnel Junction Sensors for Nuclear Recoil Spectroscopy
AI总结:
BeEST实验通过测量植入超导隧道结(STJ)传感器中$^7$Be衰变的核 recoil 能量,寻找亚MeV中微子。研究开发铝基STJ(Al-STJ)以分离材料效应与标准模型外物理信号。
摘要:
BeEST实验通过测量植入超导隧道结(STJ)传感器中$^7$Be衰变的核 recoil 能量,寻找亚MeV中微子。recoil 谱受放射性植入物与传感器材料相互作用的影响。因此,我们开发了铝基STJ(Al-STJ)作为替代现有钽设备(Ta-STJ)来研究如何分离recoil 谱中的材料效应与可能的超出标准模型的物理信号。制造了三个迭代的Al-STJ。第一代具有与现有Ta-STJ相似的电极厚度,具有低响应性和分辨率,但成功用于测量$^7$Be核recoil 谱。第二代通过背面蚀刻在薄SiN膜上悬吊,具有低漏电流,但产量低。最终一代未进行背面蚀刻,Al-STJ具有更薄的电极和隧道屏障以增加信号幅度。这些设备在使用脉冲355 nm(~3.5 eV)激光时,实现了50 eV处2.96 eV FWHM能量分辨率。这些结果确立了Al-STJ作为BeEST实验中系统材料研究的可行探测器。
英文摘要:
The BeEST experiment is searching for sub-MeV sterile neutrinos by measuring nuclear recoil energies from the decay of $^7$Be implanted into superconducting tunnel junction (STJ) sensors. The recoil spectra are affected by interactions between the radioactive implants and the sensor materials. We are therefore developing aluminum-based STJs (Al-STJs) as an alternative to existing tantalum devices (Ta-STJs) to investigate how to separate material effects in the recoil spectrum from potential signatures of physics beyond the Standard Model. Three iterations of Al-STJs were fabricated. The first had electrode thicknesses similar to existing Ta-STJs. They had low responsivity and reduced resolution, but were used successfully to measure $^7$Be nuclear recoil spectra. The second iteration had STJs suspended on thin SiN membranes by backside etching. These devices had low leakage current, but also low yield. The final iteration was not backside etched, and the Al-STJs had thinner electrodes and thinner tunnel barriers to increase signal amplitudes. These devices achieved 2.96 eV FWHM energy resolution at 50 eV using a pulsed 355 nm (~3.5 eV) laser. These results establish Al-STJs as viable detectors for systematic material studies in the BeEST experiment.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。