arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2510.01016stat.COcond-mat.mtrl-scicond-mat.stat-mech
收藏

基于多模态实验数据的GTN损伤模型序贯贝叶斯推断

Sequential Bayesian Inference of the GTN Damage Model Using Multimodal Experimental Data

Georgia Institute of Technology(佐治亚理工学院);Exponent(Exponent公司);School of Computational Science and Engineering, Georgia Institute of Technology(佐治亚理工学院计算科学与工程学部)

Mohammad Ali Seyed Mahmoud, Dominic Renner, Ali Khosravani, Surya R. Kalidindi

AI总结:

本文提出基于多模态实验数据的序贯贝叶斯推断方法,用于校准GTN损伤模型,通过PCA降维和顺序应用BI提升参数估计精度。

摘要:

在延性损伤模型中可靠参数识别仍然具有挑战性,因为损伤进展的显著物理特性被局部化为材料响应中的小区域,其特征往往在试样级测量中被稀释。本文提出了一种序贯贝叶斯推断(BI)框架,用于利用多模态实验数据(即试样级力-位移(F-D)测量和空间分辨的数字图像相关(DIC)应变场)校准Gurson-Tvergaard-Needleman(GTN)模型。该校准方法基于之前开发的两步BI框架,首先建立了一个低计算成本的模拟器(此处为包含GTN材料模型的有限元模型)的替代器,然后利用实验数据对材料模型参数进行后验采样,使用过渡马尔可夫链蒙特卡洛(T-MCMC)。应用此BI框架到当前问题中的主要挑战来自于需要高维表示来捕捉嵌入在F-D曲线和DIC场中的显著特征。在本文中,证明了主成分分析(PCA)提供了低维表示,使其能够应用于该问题。最重要的是,发现BI应用的顺序对结果有显著影响。具体来说,先在F-D曲线上应用BI,然后在DIC场上应用,产生了更准确的GTN参数估计。本文还讨论了这些观察的可能原因,以AA6111铝合金作为案例研究。

英文摘要:

Reliable parameter identification in ductile damage models remains challenging because the salient physics of damage progression are localized to small regions in material responses, and their signatures are often diluted in specimen-level measurements. Here, we propose a sequential Bayesian Inference (BI) framework for the calibration of the Gurson-Tvergaard-Needleman (GTN) model using multimodal experimental data (i.e., the specimen-level force-displacement (F-D) measurements and the spatially resolved digital image correlation (DIC) strain fields). This calibration approach builds on a previously developed two-step BI framework that first establishes a low-computational-cost emulator for a physics-based simulator (here, a finite element model incorporating the GTN material model) and then uses the experimental data to sample posteriors for the material model parameters using the Transitional Markov Chain Monte Carlo (T-MCMC). A central challenge to the successful application of this BI framework to the present problem arises from the high-dimensional representations needed to capture the salient features embedded in the F-D curves and the DIC fields. In this paper, it is demonstrated that Principal Component Analysis (PCA) provides low-dimensional representations that make it possible to apply the BI framework to the problem. Most importantly, it is shown that the sequence in which the BI is applied has a dramatic influence on the results obtained. Specifically, it is observed that applying BI first on F-D curves and subsequently on the DIC fields produces improved estimates of the GTN parameters. Possible causes for these observations are discussed in this paper, using AA6111 aluminum alloy as a case study.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑