arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2501.09047cond-mat.mtrl-sci
收藏

微秒级偏压极性切换揭示卤化物钙钛矿界面处的隐藏电荷动力学

Microsecond Bias Polarity Switching Reveals Hidden Charge Dynamics at Halide Perovskite Interfaces

Charles University(查理大学);University of Tennessee(田纳西大学);Yonsei University(延世大学);Helmholtz-Zentrum Berlin für Materialien und Energie (HZB)(柏林亥姆霍兹材料能源中心)

Marián Betušiak, Roman Grill, Eduard Belas, Petr Praus, Mykola Brynza, Mariselvam Karuppaiya, Mahshid Ahmadi, Jonghee Yang, Artem Musiienko

AI总结:

本文提出微秒级偏压极性切换(BiPS)时域技术,用于探测卤化物钙钛矿单晶的界面势垒、空间电荷和陷阱动力学,揭示埋藏界面电荷过程并区分电子与离子贡献,为接触评估和缺陷工程提供平台。

摘要:

我们提出了一种基于快速偏压极性切换(BiPS)的时域技术,用于探测卤化物钙钛矿单晶中的电荷输运和近表面缺陷。该方法利用界面提取势垒,在偏压反转后引起载流子积累和随后的释放。BiPS 将表面灵敏度(200 nm–2 μm)与毫米级作用范围相结合,能够重建内部场分布,检测低至 $10^9$ cm$^{-3}$ 的体空间电荷,并分辨微秒至毫秒级的陷阱动力学。在我们的装置中,表面态检测限为 $10^9$ cm$^{-2}$,并且可以通过优化光照和读出方式进一步提高。将 BiPS 应用于熔融法生长的 CsPbBr$_3$(Cr/Cr)和溶液法生长的 MAPbBr$_3$(Cr/SnO$_2$/Cr),揭示了驱动空穴积累和缺陷填充的界面势垒。CsPbBr$_3$ 表现出长寿命空间电荷(约 $3\ imes 10^{11}$ cm$^{-3}$)和比 MAPbBr$_3$ 快约 250 倍的空穴提取速度,而陷阱分析给出的俘获时间为 1–100 μs,去俘获时间为 20 μs–3 ms,激活能为 300–500 meV。因此,BiPS 提供了对埋藏界面过程的直接观测途径,能够区分电子贡献和离子贡献,并为评估接触和指导钙钛矿光电器件中的缺陷工程提供了一个稳健的平台。

英文摘要:

We present a time-domain technique based on rapid bias polarity switching (BiPS) to probe charge transport and near-surface defects in halide perovskite single crystals. The method exploits interfacial extraction barriers, which cause carrier accumulation and subsequent release after bias reversal. BiPS combines surface sensitivity (200 nm-2 $μ$m) with millimeter-scale reach, enabling reconstruction of internal field profiles, detection of bulk space charge down to $10^9$ cm$^{-3}$, and resolution of microsecond-millisecond trap dynamics. In our setup the surface-state detection limit is $10^9$ cm$^{-2}$, and could be further improved by optimized illumination and readout. Applied to melt-grown CsPbBr$_3$ (Cr/Cr) and solution-grown MAPbBr$_3$ (Cr/SnO$_2$/Cr), BiPS reveals interfacial barriers that drive hole accumulation and defect filling. CsPbBr$_3$ shows long-lived space charge ($\sim 3\times 10^{11}$ cm$^{-3}$) and $\sim 250\times$ faster hole extraction than MAPbBr$_3$, while trap analysis yields capture times of 1-100 $μ$s, detrapping times of 20 $μ$s-3 ms, and activation energies of 300-500 meV. BiPS thus provides direct access to buried interfacial processes, disentangles electronic and ionic contributions, and offers a robust platform for evaluating contacts and guiding defect engineering in perovskite optoelectronic devices.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑