arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2412.20153physics.opticsphysics.app-ph
收藏

宽光谱高吸收硅扩展面黑体的背向散射抑制

Back-Scattering Suppression for Broad-Spectral High-Absorption Silicon Extended Area Blackbody

HongShuai Zhou, JinHao Zhang, BenFeng Bai, XiRan Mei, KunPeng Chen, XiaoPeng Hao, Jian Song, GuoRui Guo, JiaLin Chen, Tian Tian, WanJie Shen, ZiHeng Zhong, JiaY… 展开作者

HongShuai Zhou, JinHao Zhang, BenFeng Bai, XiRan Mei, KunPeng Chen, XiaoPeng Hao, Jian Song, GuoRui Guo, JiaLin Chen, Tian Tian, WanJie Shen, ZiHeng Zhong, JiaYao Liu, JiHong Zhao, HongBo Sun

AI总结:

本文提出通过抑制近场背向散射降低远场反射率,并结合飞秒激光自收敛加工技术,制备出高发射率、高稳定性的宽光谱硅扩展面黑体,用于极端环境下红外遥感在线校准。

摘要:

在极端环境中用于高精度红外遥感探测器的在线校准黑体,其稳定性和发射率是限制测量精度的主要因素。由于微结构尺寸效应的限制,传统的校准扩展面黑体无法在发射率与稳定性之间实现最佳平衡,从而阻碍了红外遥感精度的进一步提升。本工作提出了一种利用抑制近场背向散射来控制远场反射率的新方法。具体而言,通过同时降低背向散射强度和背向散射立体角,反射率被显著降低至极低极限,并通过数值模拟进行了验证。此外,结合飞秒激光自收敛加工技术,利用飞秒激光加工过程中的自发能量负反馈机制,实现了高发射率、热稳定、机械稳定且高度均匀的扩展面黑体的制备。使用该技术制备的黑体可应用于各种极端环境下的在线校准,显著提高测量精度和使用寿命。

英文摘要:

The stability and emissivity of the online calibration blackbody used in high-precision infrared remote sensing detectors in extreme environments are the primary limiting factors for their measurement accuracy. Due to the limitations of microstructure size effects, traditional calibration extended area blackbody cannot achieve an optimal balance between emissivity and stability, thus hindering further improvement in infrared remote sensing accuracy. This work proposes a new method that utilize suppressing near-field backscattering to control far-field reflectance. Specifically, through simultaneously reducing backscattering intensity and the backscattering solid angle, the reflectance is significantly reduced to an extremely low limit, which is validated through numerical simulations. Additionally, by combining the femtosecond laser self-convergent processing technique, the spontaneous energy negative feedback mechanism during femtosecond laser processing is utilized to achieve the fabrication of a high emissivity, thermally stable, mechanically stable, and highly uniform extended area blackbody. The blackbody fabricated using this technique can be applied for online calibration in various extreme environments, significantly improving measurement accuracy and service life.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑