SEM实验中电子束诱导样品加热的测量
Measurement of electron beam induced sample heating in SEM experiments
AI总结:
针对SEM/EBSD中电子束导致局部升温的问题,本文用MEMS装置直接测量铁样品的束流能量沉积,并结合Monte Carlo与有限元模拟量化参数影响,发现温升最高达70 °C且束流影响最大。
摘要:
扫描电子显微镜(SEM)实验可提供对材料微观结构的详细洞察,能够实现高分辨率成像,并通过电子背散射衍射(EBSD)等先进技术进行晶体学分析。然而,高能电子束与材料的相互作用可能导致局部加热,这可能显著影响样品完整性,尤其是在需要长时间电子束曝光的应用中,例如使用EBSD绘制晶体结构时。本研究考察了电子束对模型金属样品(铁)的诱导加热效应,使用基于MEMS的加热装置直接测量局部沉积的电子束能量,并通过包括Monte Carlo和有限元方法在内的模拟验证这些测量结果。分析重点关注各种实验参数的影响,例如加速电压(5至30 kV)、电子束电流(0.17 nA至22 nA)、驻留时间(1 μs至1 ms)以及样品倾角(0°至70°)。研究结果表明,在EBSD实验期间,局部样品温度最高可升高70 °C,其主要受电子束电流和加速电压选择的影响,其中电子束电流的影响最为显著。
英文摘要:
Scanning Electron Microscopy (SEM) experiments provide detailed insights into material microstructures, enabling high-resolution imaging as well as crystallographic analysis through advanced techniques like Electron Backscatter Diffraction (EBSD). However, the interaction of the high-energy electron beam with the material can lead to localized heating, which may significantly impact specimen integrity, especially in applications requiring prolonged beam exposure, for instance when mapping the crystal structure using EBSD. This study examines electron-beam-induced heating effects on a model metal sample (iron), directly measuring the locally deposited electron beam energy with a MEMS-based heating device and validating these measurements through simulations, including Monte Carlo and Finite Element methods. The analysis focuses on the effects of various experimental parameters such as acceleration voltage (from 5 to 30 kV), beam current (from 0.17 nA to 22 nA), dwell time (from 1$μ$s to 1ms) and sample tilt (0° to 70°). The findings reveal that local sample temperatures can increase by up to 70 °C during EBSD experiments, primarily affected by the choice in beam current and acceleration voltage, with beam current having the most significant impact.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。