SEM中金微粒的电子束诱导改性
Electron-beam-induced modification of gold microparticles in an SEM
AI总结:
本文在SEM中采用30 kV低能电子束实现非晶SiOx衬底上金微粒的熔融与汽化改性,并通过实验、Monte-Carlo模拟和热力学建模证明非弹性相互作用及局域加热的主导作用。
摘要:
在透射电子显微镜中,电子束诱导的材料转化利用加速电压高于100 kV的局域电子束的高功率密度作为能源,在亚微米尺度上转变物质。本文在扫描电子显微镜中开发了利用加速电压为30 kV的低能电子束对前驱体微粒进行电子束诱导转化的方法,以提高该技术的通用性和效率。在这些条件下,该技术可归类于电子束光刻(电子束用于在衬底上铣孔或在衬底上生长某种不同材料)与电子束焊接(克服熔融相时可将物质焊接在一起)之间。对非晶SiOx衬底上的金微粒进行改性,揭示了非弹性电子-物质相互作用以及随后的局域加热对于观察到的前驱体微粒在电子束下熔融和汽化的主导作用。Monte-Carlo散射模拟和热力学建模进一步支持了这些发现。
英文摘要:
Electron-beam-induced conversion of materials in a transmission electron microscope uses the high power density of a localized electron beam of acceleration voltages above 100 kV as an energy source to transform matter at the sub-micron scale. Here, the e-beam-induced transformation of precursor microparticles employing a low-energy e-beam with an acceleration voltage of 30 kV in a scanning electron microscope is developed to increase the versatility and efficiency of the technique. Under these conditions, the technique can be classified between e-beam lithography, where the e-beam is used to mill holes in or grow some different material onto a substrate, and e-beam welding, where matter can be welded together when overcoming the melting phase. Modifying gold microparticles on an amorphous SiOx substrate reveals the dominant role of inelastic electron-matter interaction and subsequent localized heating for the observed melting and vaporization of the precursor microparticles under the electron beam. Monte-Carlo scattering simulations and thermodynamic modeling further support the findings.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。