arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2411.19792physics.flu-dyn
收藏

配备炭化烧蚀热防护系统的火箭喷管流动-热耦合分析

Coupled Flow-Thermal Analysis of a Rocket Nozzle with Charring Ablative Thermal Protection System

Indian Institute of Technology Kanpur(坎普尔印度理工学院);Liquid Propulsion Systems Centre (ISRO)(液体推进系统中心(印度空间研究组织))

Basit G. Sheikh, Rakesh Kumar, Susheel Kumar S

AI总结:

本文通过耦合CFD求解器与瞬态材料响应程序,分析AVCOAT炭化烧蚀TPS防护的火箭喷管,揭示喉部热流演变与约2.5 mm表面后退,为喷管热防护设计提供预测框架。

摘要:

本文对受炭化烧蚀热防护系统(TPS)保护的火箭喷管进行了共轭流动-热分析。研究采用耦合方法,通过在流固界面交换边界条件,将CFD求解器与自研的瞬态材料响应程序相集成。喷管采用AVCOAT热防护系统,并承受高温可压缩流作用。结果表明,喷管喉部是关键位置,表现出最高的对流载荷、最早达到材料烧蚀温度以及渐进式表面后退。对耦合模拟的时间分析显示,壁面热通量先出现初始峰值,随后短暂降低,之后又因黏性耗散和不断变化的表面条件改变近壁热场而再度回升。在120秒的模拟运行结束时,喉部的最大表面后退量约为2.5毫米。本研究为预测配备炭化TPS材料的火箭喷管的热响应与烧蚀响应提供了一种方法。所提出的框架为极端环境下高性能喷管的设计和优化提供了有价值的见解。

英文摘要:

This paper presents a conjugate flow-thermal analysis of a rocket nozzle protected by a charring ablative thermal protection system (TPS). The study employs a coupled approach, integrating a CFD solver with an in-house transient material response code through the exchange of boundary conditions at the fluid-solid interface. The nozzle incorporates an AVCOAT TPS and is subjected to high-temperature compressible flow. Results identify the nozzle throat as the critical location, exhibiting the highest convective loading, early attainment of the material ablation temperature, and progressive surface recession. Temporal analysis of the coupled simulations reveals an initial peak in wall heat flux followed by a transient reduction and a subsequent resurgence as viscous dissipation and evolving surface conditions modify the near-wall thermal field. At 120 s of simulated operation, the maximum surface recession at the throat is approximately 2.5 mm. This research provides a methodology for predicting the thermal and ablative response of rocket nozzles equipped with charring TPS materials. The proposed framework offers valuable insights into the design and optimization of high-performance nozzles for extreme environments.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑