存在烧蚀时高超声速非平衡流与炭化材料热响应数值模拟的隐式耦合框架
An implicit coupling framework for numerical simulations between hypersonic nonequilibrium flows and charring material thermal response in the presence of ablation
AI总结:
针对高超声速烧蚀防热材料,提出流场与材料热响应的隐式耦合框架,利用双时间步更新界面量以降低离散误差并抑制振荡。
摘要:
本文提出了一种高超声速非平衡流与材料热响应之间的隐式耦合框架,用于在飞行轨迹期间对烧蚀防热材料进行数值模拟。炭化烧蚀材料在承受高超声速气流的气动加热时,会经历烧蚀和热解等复杂过程,涉及非均相和均相化学反应。这些多物理现象由一个考虑热解气体组分复杂性的多组分材料热响应(MTR)求解器模拟。通过计算组分浓度,提高热解气体输运参数和热物理参数的精度。MTR求解器在有限差分离散形式上实现隐式时间积分,以获得更高效率。高超声速流与材料热响应的数值解通过一个基于烧蚀表面质量与能量平衡的气-面相互作用界面进行耦合。耦合模拟采用双时间步技术,通过引入伪时间步来提高时间精度。显式耦合机制在物理时间步更新界面量,计算效率更高,但会引入时间离散误差和界面量的数值振荡。相比之下,隐式耦合机制在伪时间步更新界面量,可减小时间离散误差并抑制数值振荡,但效率较低。此外,本文还提出了一种基于稳态烧蚀假设或辐射平衡假设的简化烧蚀边界,用于在不耦合MTR解的情况下近似固体导热,从而在存在烧蚀时提供准稳态流动解。
英文摘要:
An implicit coupling framework between hypersonic nonequilibrium flows and material thermal response is proposed for the numerical simulation of ablative thermal protection materials during its flight trajectory. Charring ablative materials, when subjected to aerodynamic heating from hypersonic flows, undergo complex processes such as ablation and pyrolysis, involving heterogeneous and homogeneous chemical reactions. These multi-physical phenomena are simulated by a multicomponent material thermal response (MTR) solver that takes into account the complexity of component of pyrolysis gases. The species concentrations are calculated to improve the accuracy of transport and thermophysical parameters of pyrolysis gases. The MTR solver implements implicit time integration on finite difference discretization form to achieve higher efficiency. The numerical solutions of hypersonic flows and material thermal response are coupled through a gas-surface interaction interface based on surface mass and energy balance on the ablating surface. The coupled simulation employs the dual time-step technique, which introduces pseudo time step to improve temporal accuracy. The explicit coupling mechanism updates the interfacial quantities at physical time steps, which achieves higher computational efficiency, but introduces time discretization errors and numerical oscillations of interfacial quantities. In contrast, the implicit coupling mechanism updates the interfacial quantities at pseudo time steps, which reduces the temporal discretization error and suppresses numerical oscillations, but is less efficient. In addition, a simplified ablation boundary based on steady-state ablation assumption or radiation-equilibrium assumption is proposed to approximate solid heat conduction without coupling the MTR solution, providing quasi-steady flow solutions in the presence of ablation.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。