This article presents an innovative study in exploring, evaluating, and implementing deep learning architectures for the calibration of multi-modal sensor systems. The focus behind this is to leverage the use of sensor fusion to achieve dynamic, real-time alignment between 3D LiDAR and 2D Camera sensors. static calibration methods are tedious and time-consuming, which is why we propose utilizing Conventional Neural Networks (CNN) coupled with geometrically informed learning to solve this issue. We leverage the foundational principles of Extrinsic LiDAR-Camera Calibration tools such as RegNet, CalibNet, and LCCNet by exploring open-source models that are available online and comparing our results with their corresponding research papers. Requirements for extracting these visual and measurable outputs involved tweaking source code, fine-tuning, training, validation, and testing for each of these frameworks for equal comparisons. This approach aims to investigate which of these advanced networks produces the most accurate and consistent predictions. Through a series of experiments, we reveal some of their shortcomings and areas for potential improvements along the way. We find that LCCNet yields the best results out of all the models that we validated.
As neuromorphic technology is maturing, its application to robotics and autonomous vehicle systems has become an area of active research. In particular, event cameras have emerged as a compelling alternative to frame-based cameras in low-power and latency-demanding applications. To enable event cameras to operate alongside staple sensors like lidar in perception tasks, we propose a direct, temporally-decoupled extrinsic calibration method between event cameras and lidars. The high dynamic range, high temporal resolution, and low-latency operation of event cameras are exploited to directly regi…
Institute of Industrial Science, The University of Tokyo（东京大学产业技术研究所）；Microsoft（微软）
In this paper, we propose a method of targetless and automatic Camera-LiDAR calibration. Our approach is an extension of hand-eye calibration framework to 2D-3D calibration. By using the sensor fusion odometry method, the scaled camera motions are calculated with high accuracy. In addition to this, we clarify the suitable motion for this calibration method. The proposed method only requires the three-dimensional point cloud and the camera image and does not need other information such as reflectance of LiDAR and to give initial extrinsic parameter. In the experiments, we demonstrate our method…
The Hong Kong University of Science and Technology（香港科技大学）
Multiple LiDARs have progressively emerged on autonomous vehicles for rendering a wide field of view and dense measurements. However, the lack of precise calibration negatively affects their potential applications in localization and perception systems. In this paper, we propose a novel system that enables automatic multi-LiDAR calibration without any calibration target, prior environmental information, and initial values of the extrinsic parameters. Our approach starts with a hand-eye calibration for automatic initialization by aligning the estimated motions of each sensor. The resulting para…
Department of Control Science & Engineering, the College of Electronic & Information Engineering, Tongji University（控制科学与工程系，电子与信息工程学院，同济大学）；School of Computer Science and Engineering, Central South University（计算机科学与工程学院，中南大学）；Beijing Institute of Aerospace Control Devices（北京航天控制器件研究所）；Institute of Automation, Chinese Academy of Sciences（自动化研究所，中国科学院）
Sensor calibration, which can be intrinsic or extrinsic, is an essential step to achieve the measurement accuracy required for modern perception and navigation systems deployed on autonomous robots. To date, intrinsic calibration models for spinning LiDARs have been based on hypothesized based on their physical mechanisms, resulting in anywhere from three to ten parameters to be estimated from data, while no phenomenological models have yet been proposed for solid-state LiDARs. Instead of going down that road, we propose to abstract away from the physics of a LiDAR type (spinning vs solid-stat…
Light Detection and Ranging (LIDAR) sensors play an important role in the perception stack of autonomous robots, supplying mapping and localization pipelines with depth measurements of the environment. While their accuracy outperforms other types of depth sensors, such as stereo or time-of-flight cameras, the accurate modeling of LIDAR sensors requires laborious manual calibration that typically does not take into account the interaction of laser light with different surface types, incidence angles and other phenomena that significantly influence measurements. In this work, we introduce a phys…
For autonomous vehicles, an accurate calibration for LiDAR and camera is a prerequisite for multi-sensor perception systems. However, existing calibration techniques require either a complicated setting with various calibration targets, or an initial calibration provided beforehand, which greatly impedes their applicability in large-scale autonomous vehicle deployment. To tackle these issues, we propose a novel method to calibrate the extrinsic parameter for LiDAR and camera in road scenes. Our method introduces line features from static straight-line-shaped objects such as road lanes and pole…
Australian Centre for Field Robotics（澳大利亚野外机器人中心）；University of Sydney（悉尼大学）；Baraja Pty Ltd（巴拉哈私人有限公司）
We propose a robust calibration pipeline that optimises the selection of calibration samples for the estimation of calibration parameters that fit the entire scene. We minimise user error by automating the data selection process according to a metric, called Variability of Quality (VOQ) that gives a score to each calibration set of samples. We show that this VOQ score is correlated with the estimated calibration parameter's ability to generalise well to the entire scene, thereby overcoming the overfitting problems of existing calibration algorithms. Our approach has the benefits of simplifying…
Hong Kong University of Science and Technology（香港科技大学）
Combining multiple LiDARs enables a robot to maximize its perceptual awareness of environments and obtain sufficient measurements, which is promising for simultaneous localization and mapping (SLAM). This paper proposes a system to achieve robust and simultaneous extrinsic calibration, odometry, and mapping for multiple LiDARs. Our approach starts with measurement preprocessing to extract edge and planar features from raw measurements. After a motion and extrinsic initialization procedure, a sliding window-based multi-LiDAR odometry runs onboard to estimate poses with online calibration refine…
Sensor setups consisting of a combination of 3D range scanner lasers and stereo vision systems are becoming a popular choice for on-board perception systems in vehicles; however, the combined use of both sources of information implies a tedious calibration process. We present a method for extrinsic calibration of lidar-stereo camera pairs without user intervention. Our calibration approach is aimed to cope with the constraints commonly found in automotive setups, such as low-resolution and specific sensor poses. To demonstrate the performance of our method, we also introduce a novel approach f…
With information from multiple input modalities, sensor fusion-based algorithms usually out-perform their single-modality counterparts in robotics. Camera and LIDAR, with complementary semantic and depth information, are the typical choices for detection tasks in complicated driving environments. For most camera-LIDAR fusion algorithms, however, the calibration of the sensor suite will greatly impact the performance. More specifically, the detection algorithm usually requires an accurate geometric relationship among multiple sensors as the input, and it is often assumed that the contents from …
Australian Centre for Field Robotics（澳大利亚野外机器人学中心）；University of Sydney（悉尼大学）
This paper proposes an automated method to obtain the extrinsic calibration parameters between a camera and a 3D lidar with as low as 16 beams. We use a checkerboard as a reference to obtain features of interest in both sensor frames. The calibration board centre point and normal vector are automatically extracted from the lidar point cloud by exploiting the geometry of the board. The corresponding features in the camera image are obtained from the camera's extrinsic matrix. We explain the reasons behind selecting these features, and why they are more robust compared to other possibilities. To…
Vellore Institute of Technology, Chennai（金奈韦洛尔理工大学）；Birla Institute of Technology and Science, Hyderabad（海得拉巴比尔拉理工学院）；Veermata Jijabai Technological Institute, Mumbai（孟买韦尔马塔·吉贾拜技术学院）；International Institute of Information and Technology, Hyderabad（海得拉巴国际信息技术学院）
With the advent of autonomous vehicles, LiDAR and cameras have become an indispensable combination of sensors. They both provide rich and complementary data which can be used by various algorithms and machine learning to sense and make vital inferences about the surroundings. We propose a novel pipeline and experimental setup to find accurate rigid-body transformation for extrinsically calibrating a LiDAR and a camera. The pipeling uses 3D-3D point correspondences in LiDAR and camera frame and gives a closed form solution. We further show the accuracy of the estimate by fusing point clouds fro…
A Target-based Multi-LiDAR Multi-Camera Extrinsic Calibration System
Research \& Development, Toyota Material Handling Manufacturing, Bologna Italy Department of Information Engineering, University of Pisa, Pisa, Italy School of Engineering；Materials Science, Queen Mary University of London, London, United Kingdom
UniCalib: Targetless LiDAR-Camera Calibration via Probabilistic Flow on Unified Depth Representations
School of Computer Science, Wuhan University（武汉大学计算机学院）；School of Electronic Information, Wuhan University（武汉大学电子信息学院）；School of Artificial Intelligence, Wuhan University（武汉大学人工智能学院）
The homogeneous transformation between a LiDAR and monocular camera is required for sensor fusion tasks, such as SLAM. While determining such a transformation is not considered glamorous in any sense of the word, it is nonetheless crucial for many modern autonomous systems. Indeed, an error of a few degrees in rotation or a few percent in translation can lead to 20 cm translation errors at a distance of 5 m when overlaying a LiDAR image on a camera image. The biggest impediments to determining the transformation accurately are the relative sparsity of LiDAR point clouds and systematic errors i…
The Hong Kong University of Science and Technology (Guangzhou)（香港科技大学（广州））；Hong Kong University of Science and Technology（香港科技大学）；HKUST Shenzhen-Hong Kong Collaborative Innovation Research Institute（香港科技大学深港协同创新研究院）；CWB Institute of Autonomous Driving（CWB自动驾驶研究院）
The combination of LiDARs and cameras enables a mobile robot to perceive environments with multi-modal data, becoming a key factor in achieving robust perception. Traditional frame cameras are sensitive to changing illumination conditions, motivating us to introduce novel event cameras to make LiDAR-camera fusion more complete and robust. However, to jointly exploit these sensors, the challenging extrinsic calibration problem should be addressed. This paper proposes an automatic checkerboard-based approach to calibrate extrinsics between a LiDAR and a frame/event camera, where four contributio…
This work proposes a novel motion guided method for target-less self-calibration of a LiDAR and camera and use the re-projection of LiDAR points onto the image reference frame for real-time depth upsampling. The calibration parameters are estimated by optimizing an objective function that penalizes distances between 2D and re-projected 3D motion vectors obtained from time-synchronized image and point cloud sequences. For upsampling, a simple, yet effective and time efficient formulation that minimizes depth gradients subject to an equality constraint involving the LiDAR measurements is propose…
Most sensor setups for onboard autonomous perception are composed of LiDARs and vision systems, as they provide complementary information that improves the reliability of the different algorithms necessary to obtain a robust scene understanding. However, the effective use of information from different sources requires an accurate calibration between the sensors involved, which usually implies a tedious and burdensome process. We present a method to calibrate the extrinsic parameters of any pair of sensors involving LiDARs, monocular or stereo cameras, of the same or different modalities. The p…
This paper presents a framework for the targetless extrinsic calibration of stereo cameras and Light Detection and Ranging (LiDAR) sensors with a non-overlapping Field of View (FOV). In order to solve the extrinsic calibrations problem under such challenging configuration, the proposed solution exploits road markings as static and robust features among the various dynamic objects that are present in urban environment. First, this study utilizes road markings that are commonly captured by the two sensor modalities to select informative images for estimating the extrinsic parameters. In order to…
YOCO: You Only Calibrate Once for Accurate Extrinsic Parameter in LiDAR-Camera Systems
China University of Mining and Technology (Beijing)（中国矿业大学（北京））；College of Geoscience and Surveying Engineering, China University of Mining and Technology (Beijing)（中国矿业大学（北京）地球科学与测绘工程学院）
Native-Domain Cross-Attention for Camera-LiDAR Extrinsic Calibration Under Large Initial Perturbations
School of Automation, Beijing Institute of Technology（北京理工大学自动化学院）；School of Integrated Circuits and Electronics, Beijing Institute of Technology（北京理工大学集成电路与电子学院）
DATA61, CSIRO（联邦科学与工业研究组织数据61研究所）；Queensland University of Technology (QUT)（昆士兰科技大学）；Sun Moon University（鲜文大学）
The demand for multimodal sensing systems for robotics is growing due to the increase in robustness, reliability and accuracy offered by these systems. These systems also need to be spatially and temporally co-registered to be effective. In this paper, we propose a targetless and structureless spatiotemporal camera-LiDAR calibration method. Our method combines a closed-form solution with a modified structureless bundle adjustment where the coarse-to-fine approach does not {require} an initial guess on the spatiotemporal parameters. Also, as 3D features (structure) are calculated from triangula…
Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；FZI Research Center for Information Technology（FZI信息技术研究中心）
In this paper, we present TEScalib, a novel extrinsic self-calibration approach of LiDAR and stereo camera using the geometric and photometric information of surrounding environments without any calibration targets for automated driving vehicles. Since LiDAR and stereo camera are widely used for sensor data fusion on automated driving vehicles, their extrinsic calibration is highly important. However, most of the LiDAR and stereo camera calibration approaches are mainly target-based and therefore time consuming. Even the newly developed targetless approaches in last years are either inaccurate…
In this paper, we propose a novel online self-calibration approach for Light Detection and Ranging (LiDAR) and camera sensors. Compared to the previous CNN-based methods that concatenate the feature maps of the RGB image and decalibrated depth image, we exploit the cost volume inspired by the PWC-Net for feature matching. Besides the smooth L1-Loss of the predicted extrinsic calibration parameters, an additional point cloud loss is applied. Instead of regress the extrinsic parameters between LiDAR and camera directly, we predict the decalibrated deviation from initial calibration to the ground…
Shanghai Jiao Tong University（上海交通大学）；Shanghai AI Laboratory（上海人工智能实验室）
Sensor-based environmental perception is a crucial part of the autonomous driving system. In order to get an excellent perception of the surrounding environment, an intelligent system would configure multiple LiDARs (3D Light Detection and Ranging) to cover the distant and near space of the car. The precision of perception relies on the quality of sensor calibration. This research aims at developing an accurate, automatic, and robust calibration strategy for multiple LiDAR systems in the general road scene. We thus propose CROON (automatiC multi-LiDAR CalibratiOn and Refinement method in rOad …
Mercedes-Benz AG（梅赛德斯-奔驰股份公司）；University of Freiburg（弗莱堡大学）
The calibration of deep learning-based perception models plays a crucial role in their reliability. Our work focuses on a class-wise evaluation of several model's confidence performance for LiDAR-based semantic segmentation with the aim of providing insights into the calibration of underrepresented classes. Those classes often include VRUs and are thus of particular interest for safety reasons. With the help of a metric based on sparsification curves we compare the calibration abilities of three semantic segmentation models with different architectural concepts, each in a in deterministic and …
Accurate Measurement of 3D and 2D Circular Centers With Application to LiDAR-Camera Extrinsic Calibration
Thrust of Robotics and Autonomous Systems, The Hong Kong University of Science and Technology (Guangzhou)（机器人与自主系统研究所，香港科技大学（广州））；Lower Airspace Economy Research Institute, International Digital Economy Academy, ShenZhen（空域经济研究所，国际数字经济学院）；Horizon-Continental Technology Corporation（Horizon-Continental技术公司）；State Key Laboratory of Rail Traffic Control and Safety and the Beijing Engineering Research Center of EMC and GNSS Technology for Rail Transportation, School of Electronic and Information Engineering, Beijing Jiaotong University（轨道交通控制与安全国家重点实验室，北京交通大学电子信息工程学院，电磁兼容与GNSS技术轨道交通工程研究中心）
The Hong Kong University of Science and Technology（香港科技大学）；Unity-Drive technology Inc（Unity-Drive科技公司）；Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences（中国科学院深圳先进技术研究院）
Multiple lidars are prevalently used on mobile vehicles for rendering a broad view to enhance the performance of localization and perception systems. However, precise calibration of multiple lidars is challenging since the feature correspondences in scan points cannot always provide enough constraints. To address this problem, the existing methods require fixed calibration targets in scenes or rely exclusively on additional sensors. In this paper, we present a novel method that enables automatic lidar calibration without these restrictions. Three linearly independent planar surfaces appearing …
This paper proposes a simple self-calibration method for the internal time synchronization of MEMS(Micro-electromechanical systems) LiDAR during research and development. Firstly, we introduced the problem of internal time misalignment in MEMS lidar. Then, a robust Minimum Vertical Gradient(MVG) prior is proposed to calibrate the time difference between the laser and MEMS mirror, which can be calculated automatically without any artificial participation or specially designed cooperation target. Finally, actual experiments on MEMS LiDARs are implemented to demonstrate the effectiveness of the p…
This paper presents a novel method for fully automatic and convenient extrinsic calibration of a 3D LiDAR and a panoramic camera with a normally printed chessboard. The proposed method is based on the 3D corner estimation of the chessboard from the sparse point cloud generated by one frame scan of the LiDAR. To estimate the corners, we formulate a full-scale model of the chessboard and fit it to the segmented 3D points of the chessboard. The model is fitted by optimizing the cost function under constraints of correlation between the reflectance intensity of laser and the color of the chessboar…
CLRNet: Targetless Extrinsic Calibration for Camera, Lidar and 4D Radar Using Deep Learning
Hungarian Research Network Institute for Computer Science and Control (HUN-REN SZTAKI)（匈牙利研究网络计算机科学与控制研究所）；Pázmány Péter Catholic University（帕兹曼·佩斯特天主教大学）；Intelligent Vehicles Group, TU Delft（智能车辆组，代尔夫特理工大学）；Perciv AI
Beihang University（北京航空航天大学）；Beijing Advanced Innovation Center for Big Data and Brain Computing（大数据与脑计算北京先进创新中心）；Hangzhou Innovation Institution, Beihang University（北京航空航天大学杭州创新研究院）
Recently, the rapid development of Solid-State LiDAR (SSL) enables low-cost and efficient obtainment of 3D point clouds from the environment, which has inspired a large quantity of studies and applications. However, the non-uniformity of its scanning pattern, and the inconsistency of the ranging error distribution bring challenges to its calibration task. In this paper, we proposed a fully automatic calibration method for the non-repetitive scanning SSL and camera systems. First, a temporal-spatial-based geometric feature refinement method is presented, to extract effective features from SSL p…
Arizona State University（亚利桑那州立大学）；U.S. Army DEVCOM Research Laboratory（美国陆军作战能力发展司令部研究实验室）；U.S. Army DEVCOM C5ISR Center（美国陆军作战能力发展司令部指挥、控制、通信、计算机、网络、情报、监视与侦察中心）
Motivated by the increasing application of low-resolution LiDAR recently, we target the problem of low-resolution LiDAR-camera calibration in this work. The main challenges are two-fold: sparsity and noise in point clouds. To address the problem, we propose to apply depth interpolation to increase the point density and supervised contrastive learning to learn noise-resistant features. The experiments on RELLIS-3D demonstrate that our approach achieves an average mean absolute rotation/translation errors of 0.15cm/0.33\textdegree on 32-channel LiDAR point cloud data, which significantly outperf…
Online,Target-Free LiDAR-Camera Extrinsic Calibration via Cross-Modal Mask Matching
Tongji University（同济大学）；College of Electronics & Information Engineering（电子与信息工程学院）；Shanghai Institute of Intelligent Science and Technology（上海智能科学技术研究院）；Shanghai Research Institute for Intelligent Autonomous Systems（上海智能自主系统研究院）；State Key Laboratory of Intelligent Autonomous Systems（智能自主系统国家重点实验室）；Frontiers Science Center for Intelligent Autonomous Systems（智能自主系统前沿科学中心）
Texas A&M University（得克萨斯农工大学）；DEVCOM Army Research Laboratory (ARL)（陆军研究实验室）
This paper proposes SemCal: an automatic, targetless, extrinsic calibration algorithm for a LiDAR and camera system using semantic information. We leverage a neural information estimator to estimate the mutual information (MI) of semantic information extracted from each sensor measurement, facilitating semantic-level data association. By using a matrix exponential formulation of the $se(3)$ transformation and a kernel-based sampling method to sample from camera measurement based on LiDAR projected points, we can formulate the LiDAR-Camera calibration problem as a novel differentiable objective…
DST-Calib: A Dual-Path, Self-Supervised, Target-Free LiDAR-Camera Extrinsic Calibration Network
Department of Control Science & Engineering, the College of Electronics & Information Engineering, Tongji University（控制科学与工程系，电子与信息工程学院，同济大学）；Department of Mechanical Engineering, the School of Mechanical Engineering, Tongji University（机械工程系，机械工程学院，同济大学）；School of Robotics, Hunan University（机器人学院，湖南大学）；College of Intelligence Science and Technology, National University of Defense Technology（智能科学与技术学院，国防科学技术大学）；Department of Control Science & Engineering, the College of Electronics & Information Engineering, Shanghai Research Institute for Intelligent Autonomous Systems, the State Key Laboratory of Intelligent Autonomous Systems, and Frontiers Science Center for Intelligent Autonomous Systems, Tongji University（控制科学与工程系，电子与信息工程学院，上海智能自主系统研究院，智能自主系统国家重点实验室，智能自主系统前沿科学中心，同济大学）；National Key Laboratory of Human-Machine Hybrid Augmented Intelligence, Institute of Artificial Intelligence and Robotics, Xi’an Jiaotong University（人机混合增强智能国家重点实验室，人工智能与机器人研究院，西安交通大学）
Handong Global University（韩东国际大学）；Virginia Tech（弗吉尼亚理工大学）
This paper presents a novel automatic calibration system to estimate the extrinsic parameters of LiDAR mounted on a mobile platform for sensor misalignment inspection in the large-scale production of highly automated vehicles. To obtain subdegree and subcentimeter accuracy levels of extrinsic calibration, this study proposed a new concept of a target board with embedded photodetector arrays, named the PD-target system, to find the precise position of the correspondence laser beams on the target surface. Furthermore, the proposed system requires only the simple design of the target board at the…
